I have latest Yosemite Developer Preview installed, do I have to reinstall OS after its release?

Or should I continue using installed version and receive all the updates?

The release version has changes, though minor, so it is recommended to download the full installer and install that...available from the Mac App Store under Purchases.

Similar Messages

Have to reinstall Flash after every reboot.

Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
   this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.

sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
    Re: Have to reinstall Flash after every reboot.
    created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Windows 8.1 apps downloaded during developer preview install in Chinese on RTM (MS requsted I post this here for script to fix this)

Hello
Ever since updating to the RTM version of Windows 8.1 on every PC I have updated and signed into using my Microsoft account whenever I try to install any 8.1 app I installed onto the developer preview version it will always install in Chinese which makes
using the app impossible for me.
This happens on all PCs I have updated/used including:
Surface RT (Windows 8.1 RT)
Surface 2 (Windows 8.1 RT)
Dell OptiPlex 990 (Windows 8.1 Pro)
Dell OptiPlex 790 (Windows 8.1 Pro)
Sony Tap 20" (Windows 8.1 Pro)
The language settings of the Microsoft store and all the computers are all set to UK English and as soon as I do a fresh install of the UK version of Windows 8.1 and sign into my Microsoft account then certain apps will always install in Chinese (when in
the store it says you already own this app and can install it on this PC - when I do it is in Chinese. When the app has not been installed before or was not installed when I had the developer preview then it will install in English).
This has been driving me mad for months and I previously posted this question back in October in the Office 2013 forums as I first noticed the issue with the OneNote app but it was never resolved:
http://social.technet.microsoft.com/Forums/office/en-US/448670ae-4494-4a55-8cee-d9f1c9873db7/onenote-windows-81-app-changed-to-chinese-and-cannot-work-out-how-to-change-to-english?forum=officeitpro#448670ae-4494-4a55-8cee-d9f1c9873db7
I then posted it a few days ago here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-apps-downloaded-during-developer/5dcd0df7-edfe-420e-8737-6a48922969e1
I have now been asked by a Microsoft Support engineer to post the question here as they said a script can be provided which I can use to fix this.
I think I just need to clear the fact that I have previously installed these apps as maybe some bug in the developer preview set them to Chinese and it seems to remember this setting. I cannot understand any Chinese so this makes these apps unusable.
The only other option I can think of is to create a new Microsoft account but I would rather not have to do this.
Some of the apps affected include the OneNote app and the HP scanner app. I have uninstalled most others and found alternatives.
Thanks
Robin
Robin Wilson

Hello jrv
I managed to run the script but cannot really see how it is any different to uninstalling the apps in the normal way except for the fact that you can uninstall multiple apps at once.
This exact same problem happens on a surface 1, a surface 2 and multiple machines running either Pro or Enterprise. It is not one machine but every machine running 8.1.
I have not upgraded from the Developer Preview version on any of my machines and always do a fresh install but what I am saying is that I did use the same Microsoft account during that time and it seems to have some record of the apps I installed at that
time and thinks I want them installed now in Chinese.
The only thing in common on the 7 machines I have tried (including the 2 surfaces) is that I have joined them to my Microsoft account and the problem seems to be with the Microsoft account and not with all the machines.
To replicate this I can go to any Windows 8.1 machine and join it to my Microsoft account and this will put certain apps from the store into Chinese and I can find no way to stop this. I am pretty confident that the issue is with the Microsoft account or
a setting that is synchronising from there.
The workaround is to sign into a different Microsoft account and this installs them correctly on the same machine.
I would appreciate any help with clearing out my history of installed apps without having to create a new Microsoft account.
Thanks
Robin
Robin Wilson

Yosemite GM Candidate Installed - Guest account keeps being re-enable after reboot

Have the Yosemite GM Candidate Installed (been using 10.10 beta since about end of July). I've never had this issue prior to the GM Candidate.
I never enable the Guest account on the system (force login for a user, etc.). I disable the Guest account, reboot, and the Guest account is re-enabled and can be logged into. Disable it again, reboot - it's back.
Potential fix anyone is aware of?

We are not allowed to discuss beta software here; please refer to the FAQ and terms you agreed to (confidentiality clause). You will need to contact Apple and/or file feedback.

Do i have to reinstall photoshop, after install the new os x mavericks?

I'm currently using Mountain Lion. If I upgrade to the new Mavericks, do I have to reinstall programs like Adobe softwares and Microsoft Offices? Cause I'm currenly using a lot of software on my MacBook, like Photoshop and SketchUp. It will be a hassle if I have reinstall all these software again.

Guitartist wrote:
Although you will not need to reinstall your Adobe software, you DO need to deactivate Adobe apps before you upgrade to Mavericks. After you've installed Mavericks just launch Photoshop, etc., and it will automatically reactivate.
I see no need to deactivate Adobe apps before upgrading ML -> Mavericks, then reactivate. I don't seem to have any trouble running either Acrobat Pro 10 or Photoshop Cs 5.1 in Mavericks after the upgrade-- without the deactivate/reactivate steps.
Am I failing to understand something?

If the trial version of apps are still active, do I have to reinstall apps after subscribing?

I started using the trial version of a few apps just a few days before I ended up signing up for the year subscription, so whenever I go to use them, they still say "Tryout." Do I have to reinstall the apps now that I have a subscription?

Hi ErinMarie41,
You need not to reinstall but simply launch any of the installed CC app's, click on license this software and sign in with your Adobe Id to activate the subscription.
Regards,
Romit Sinha

Accept button instead of Install button when trying to reinstall iPhoto after Clean install

Hi All,
I recentely did a clean install for my Lion OS.
Everything works fine, except iPhoto was missing.
I opened the App Store app on the mac, and was able to successfully update GarageBand and iMove.
However, it didn't give me the option to update iPhoto as it did when I opened the mac out of the box.
I then went to the iPhoto page, and instead of "install" button I now have an "Accept" button.
When pressing on the accept button, I get the following error message:
"These apps have already been accepted.
"These apps were already assigned to your Apple ID and are available in your Purchases list."
iPhoto is neither present on the Purchases list nor in the update tab.
Will apprecaite suggestions.
Thank you

Hi Caroloine,
Thank you for your response.
I already have the 10.7.2 update. Doesn't help.
Also, the link you specifited is about downloading past purchases from iTunes Store, or the iPhone/iPad App store. I am trying to downloading iPhoto for the Mac from the Mac App Store (the App Store that is installed on the dock). I don't think it is the same stores.
After your suggestion though, just to be sure, I tried to seach iPhoto (for Lion) on the iTunes Store, but I don't think you can buy it there. It just give you iPhono/iPad results when searching for iPhoto, and I couldn't find iPhoto in any preveriously purchased list on itunes.
Any other suggestions?

When i change my os x 10.5 to snow leopard i have adobe creative suite can i just copy this back from the back up or do i have to reinstall it from its disc?

Hi all
i am finally changing my os x 10.5 to 10.6 late i know, but i was wondering i have adobe creative suite on my mac which i use for business pupouses and i wanted to know if after i change the os x system do i have to re-install these programs from their original disc or can i just copy them back onto my mac from their backup .
thank you for any help

Glad I asked...
I would Strongly suggest that you get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
You will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)

11G table appears to have "No data found" after its creation.

After the creation of the following table I cannot look up the structure of the table when clicking on "find table". Usually there needs not be any data inserted in to the table in order to just view its structure. Is there something wrong?
CREATE TABLE "Tournament _Hands " (
"T_hand_number" NUMBER(10) NOT NULL,
"T_table_number" NUMBER(10) NOT NULL,
"T_time_of_hand" DATE NULL,
"T_no_players_involved" NUMBER(10) NULL,
"T_no_players_limp" DOUBLE PRECISION NULL,
"T_players_raise " DOUBLE PRECISION NULL,
"T_player_3bet" DOUBLE PRECISION NULL,
"T_pot_size" NUMBER(10,2) NULL,
"T_payers_ to_showdown" NUMBER(10) NULL,
PRIMARY KEY ("T_hand_number")
);

1003776 wrote:
After the creation of the following table I cannot look up the structure of the table when clicking on "find table". Usually there needs not be any data inserted in to the table in order to just view its structure. with V10 above was true.
with V11 at least 1 row must have been INSERT into table.

Have to reinstall flash after every reboot. other bowsers fine.

can't help

Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r12
*http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall_the_older_Flash_Player_version
Update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?

If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
Tonu

From developer preview to normal version

I'm currently using Yosemite developer preview 8. I wanted to ask if the procedure to install the normal version, when it will be out, is the usual procedure via the app store? Should I just wait for an update to appear?

Beta software can't be discussed in this forum. Ask in the Developer forum.

Maven Plugin - Developer Preview

JDeveloper Team,
We have not had another developer preview for maven plugin in a while. After playing with the initial version, a lot of us had reported many suggestions and enhancements. Particularly, the ability to directly open a POM file at the project level and workspace level, automatically including the libraries etc. We would like to hear any update on this. Please let us know.
Thank you,
Bala Raman.

We certainly appreciated all of the feedback. During the development process, we had to make some changes to the Maven extension to make it work with the next major JDeveloper release (codename "Sherman"). Therefore, we're unable to release any additional previews of the extension until that next major release is ready, at which point the Maven extension will finally be ready too.
-- Brian

BEx7 and it's latest patch must be installed!

Can somebody explain what this error means and how do I resolve this ?
I have the Bex Query designer installed and I am trying to connect Xcelsius 2008 SP3 with BW that has SAP Enhancement Package 1: Support Package Stack 05 installed.

I'm a newbie for SAP BO and Xcelsius. I'm getting the same problem as stated in this thread which is rated as not answered.
I have been spending too much time trying to find a fix for this error. Nothing is fruitful till now. Request the Experts to post the solution to fix this problem.
I have Xcelsius 2008, SAP GUI 7.1 and then SAP GUI 7.1 Patch 20 are installed. I'm able to logon to the SAP BW through SAP Logon GUI. But when I invoke the menu SAP-->Open on Xcelsius 2008 (so as to get to SAP BW), I'm getting this error
"BEx7 and it's latest patch must be installed" pops. This error I got after entering the password details on the 'SAP Logon xxxServer' dialog box that popedup after invoking the SAP--> Open menu. I have no Idea where to get the Patch for BEx7. Also I don't know whether the Patch 20 for SAP GUI 7.1 includes the latest patch for BEx7 or not.
This problem must have been resolved by patrons who had posted this error in this thread. I would like the patrons/experts/ some one knows the solution should post a solution for this problem.

New OC4J 10g (10.1.3.1) Developer Preview now available for download!

A Developer Preview of the new OC4J 10g (10.1.3.1) release is now available for download.
This developer preview release is fully J2EE 1.4 compatible and offers numerous enhancments, including full support for the final EJB 3.0/JPA specifications and Common Annotations (JSR-250) support in the Web container. It also provides a complete Web Services stack with support of JAX-RPC, annotations based development using JSR-181, and attachment support including MIME, DIME and MTOM with support of streaming for large documents.
See http://www.oracle.com/technology/tech/java/oc4j/10131/index.html for details.

I've tried http://localhost:8888, but I get a "connection refused."
I have since found the answer. The site http://localhost:8888/ will indeed work. The problem was that the java_home for oc4j was pointing to a Java Runtime Edition of 1.5.0, and so oc4j was not starting, since oc4j only works with 1.4.x.
Still have the missing info from the readme, though.

I have latest Yosemite Developer Preview installed, do I have to reinstall OS after its release?

Similar Messages

Maybe you are looking for