I have Lightroom 5. How do I rotate images in the development module?
The heading says it all...
Well actually, it doesn't say it all
Do you mean rotate a few degrees to get the horizon level, or 90 degrees because the camera or software didn't properly recognize the photo was either landscape or portrait, or 180 degrees; or change from landscape to portrait without rotating 90 degrees; or what?
Similar Messages
-
How do I create a collectio from developed images in the develop module of Lightroom 5?
How do I create a collestion of developped and modified images in the develop module of Lightroom 5
Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
On Mac (Control-Click or Cmd+1) -
How do i rotate images in the Book feature?
I run Aperture 3.4.4 and want to know if i can rotate images when designing a book. I looked through the archives and there are several notes that say if i mouseover the upper left corner of a selected image in Edit Layout mode i will get crosshairs. This does not happen in my version. Any suggestions?
You could try to change the "angle" in the "Edit Layout" view in the Size & Position options.
To show the "Size&Position" layout options use the cogwheel below the Pages browser.
Regards
Léonie -
How do I view two "different" images in the Develop module so I can match exposure ?
Seems like a dumb question, but for the life of me cannot figure this out ?
ThxI am not aware of any view mode in the Developer module that is similar to the Library module's Compare View mode. If the images you are trying to adjust were taken at the same time under similar lighting, you can select the settings of the image you adjusted and copy them to the other images. Select the image whose setting you want to copy and then click on the Copy button found in the bottom left side panel. This will display the Copy Settings panel. Insure the setting you want to copy are checked and any you don't want to copy are unchecked. Click the Copy button. Next, select one or more images you want to copy the setting to and click on the Paste button (bottom of left panel). The selected setting will be applied to the selected images. You can also perform a similar function when in the Library module but this time, look for the Synch Settings button found at the bottom of the right hand panel. Button names are changed but the dialog is essentially the same. Photos can be selected either in grid view or the film strip.
-
Hello, I have purchased and installed Lightroom 5 on my Mac Desktop. I travel with a MacBook Air and would like to have Lightroom 5 on this device as well. The MacBook Air does not have a CD/DVD slot. How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?
Adobe - Lightroom : For Macintosh
Just download and install 5.7.1. Don't worry about earlier versions.
You'll need to enter your serial number to license the software. -
Ive paid my cc membership and have lightroom 5 how do I download and us photoshop cc
ive paid my cc membership and have lightroom 5 how do I download and us photoshop cc
Moving this discussion to the Creative Cloud Download & Install forum.
Cwppix for information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html. -
I have Lightroom 5, how do I upgrade to Lightroom 6? Is there a price for upgrade or do I have to buy the whole package of Lightroom 6? What are the links ?
jimh40613356 wrote:
I have exactly the same question. When I use the link provided, the price for LR6 is $149. I've spent over an hour trying different links and researching on forums. This may be because I currently have a "Creative Cloud" subscription (which I plan to cancel). Please advise as to how to access upgrade pricing.
<rant>This is insane. I'm a long time customer and have licensed multiple Adobe products. All I want to do is upgrade a product I've used for years. Why Adobe seems to go out of its way to make it difficult to buy its products is totally baffling.</rant>
Thanks for your help
If you click buy, it takes you to a sub munu, where you can select either "Full or Upgrade". Select Upgrade, then select the version you already have. The upgrade price will then be displayed. -
The lock rotation has turned on I have no idea how there is no icon on the bottom task bar can anyone help please
You have the lock icon towards the top right of the screen next to the battery indicator ? If you do then which iPad do you have ? If it's not the iPad Air 2 then you should have a Settings > General > Use Side Switch To option which controls what the switch on the side of the iPad, above the volume control does - if that is set to 'Lock Rotation' then you use that switch on the side to turn rotation on/off
If there isn't a lock icon at the top right then try a soft-reset and see if that gets the iPad to rotate again : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How can I retrieve the "Basic" menu on Lightroom 5? I accidentally bumped something while working in the Develop module of Lightroom 5, and now the Tone Curve menu is directly under the Tool Bar, with no option to click on "Basic."
Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
On Mac (Control-Click or Cmd+1) -
I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using the crop tool the picture would disappear and only reappear once I closed the tool. Then exposure and White balance changes would change the histogram but not the appearance of the photo. Finally clipping was also not appearing on the picture. I first reuploaded the photos. No effect. Then I reinstalled lightroom. No effect. Help please!
Try deleting your preferences file
How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol… -
How do I get the basic panel in the develop module to reappear in Lightroom 5?
Hello! I was editing a photo in Lightroom 5 the other day, and I thought I hit something, but all of a sudden the basic panel was missing. I went online to see how I can fix it, and what was suggested was to right click on one of the panels and it should have an option that says basic, in order to get the basic panel back. That is what I did, but what it does is just opens and closes the panels. I don't know how to get my basic panel back, I hope I can get some advice.
Thank You!The trick is to right-click on one of the other panel headers, e.g. Tone Curve, and you'll see a context menu allowing you ro reselect the Basic Panel.
Alternatively, when in the Develop Module simply do Ctrl+1 (Cmd+1 on a Mac), or in the menu bar go to Window>Panels>Basic Panel. -
I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!
Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.
-
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be. -
I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.
-
My iPhone is running out of storage. I want to delete a bunch of photos on my phone. I have iCloud. How do I delete photos from the iPhone and keep them on my computer? I need to free up storage as my phone will no longer take photos.
The only way you can do that is to import them into your library first, but you may have done that already.
The easiest way to tell is to select a photo from the photostream album in iPhoto and ctrl-click on it, if it gives you the option to import it isn't in your iPhoto library, if it offers you the option to show in library it has already been imorted.
Maybe you are looking for
-
Small Office Network Solution for Final Cut Server - Proxy Storage Etc.
Hi, I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most e
-
The image in the header is previews in design and IE6 properly and looks good. When previewed in IE7 the header and the footer go beyond the box about 1 inch. Can someone help? I'm new to this, and I don't know where else to look. I've changed the bo
-
I need all drivers for hp pavillion dv4
hello i am in search of the drivers for my hp dvr4 i haved searched for them and i still cant find them. i also get a blue screen saying hardware malfunction .... call your vendor for support.....sytem was halted
-
Hi - I have to create file out of huge oracle table (350 column ) Is there a way to create a file other than using IKM SQL to FILE APPEND. -app
-
Oracle9i & Oracle9i Lite Question?
HI.. To use Oracle-9i Lite: Do I need to install Oracle-9i Personal as well? I want to be able to run an application on a WIN32 Laptop, whilst it is off-line (Not Connected to the main Oracle Server). Can I connect to Oracle-9i Lite database via a tn