I have lost 6 of 13 episodes for two different shows, and am losing my mind

Hi all,
I have been conversing via email with the iTunes support staff since June 27th, when everything went haywire. Now each week when I add another show, I seem to have a magical number of '7", and a older show drops off, when I post the new one.
I am not sure what to do, and people are getting pretty up set that the shows are not listed. I still keep getting the standard, and I quote: "Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible." message from the support staff, and although I do appreciate what they do for all of us, they are ruining my business.
Can anyone help me figure this out, even my own tech people are stumped. It just seems like the magic number is "7" and I cannot go above that number with episodes.
Any advice would be greatly appreciated and I would be willing to "pay" anyone for there tech support, who can get this fixed for me ASAP. We are supposed to be listed in a national magazine next week, and I am desperatly trying to get this resolved be for the story hits.
Thank you in advance for any help you can provide...
Peg

No problem Peggy, glad to be of help.
For those in the future who read this post and might be having the same problem.
Peggy was using Blogspot and Feedburner to post her feed to iTunes. I had had the same problem with .Mac and iWeb and iTunes a few months ago with my podcast... ie only having a small number of episodes listed in the ITMS and new episodes causing older episodes to disappear. I found that the problem isn't with ITMS, it's with your blog software.
For my problem the was the fix... In iWeb, I went to the INSPECTOR and changed the number of blogs to 50 (it also changes the number of podcasts allowed)... saved, republished, ping'd and a couple hours later it was fixed.
With Peggy we did much the same, we went to her blogspot control panel, changed the number of blogs to 50 per page, saved, republished, ping'd, crossed our fingers, and that did it.
It seems that ITMS has an issue with the blog control panels directing how many episodes are current. So set your settings to allow as many as possible.
Hope this helps you all. And by the way... Peggy's podcast is excellent.
The name of it is "authors in your pocket". Do a search on ITMS and you'll find it. Very professionally done.

Similar Messages

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

yes the title says most of what is going on.
I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
It starts up with the apple logo
-goes to the ios 6 (please slide to open) screen
-then shuts off
-and repeats the process unless I shut the phone off manually
I have tried to hold the lock and the home button down to manually reset the phone
I have also tried reseting the phone completely previously, and I still have this problem.
Any ideas?
Thank you!!

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I have lost the export settings for FCP7. How can I get these back?

I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
I have lost the export settings for FCP7. How and Can I get these back? tia

Sorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore you trashed files.
Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
If this doesn't work - it might be
the best thing to do would be to get FCS Remover from Digital Rebellion (free)
http://www.digitalrebellion.com/fcsremover/
and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
MtD

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

One PO for two different vendors

Hi Experts ,
My Questions are ......
Can we maintain two different vendors for two different materials and create one PO ? ;
How does it work ?
How is it sent to different Vendors ?.
Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
Regards
Albert

Hi Albert,
Your qns-
Can we maintain two different vendors for two different materials and create one PO ? ;
Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
Vivek

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

Is there a way to have two different iTunes for two different iPhones on one Windows User account?

Using Windows 7, iphone 4.
I've read as many threads on these forums and as many kb's as I could find, but I sttill can't figure it out. I have 2 iPhones. Let's call them, "wife" and "hubby". I want to have two separate iTunes, one for each of the phones. Hubby is the Windoows User. I don't want to set up a different Windows User for wife.
Hubby was the original iPhone. When I plug it in, iTunes recognized it has Hubby's iPhone. Then I unplug Hubby and close iTunes. I plug in Wife but iTunes stll comes up with Hubby under Devices and syncs Hubby's iTunes to Wife's iphone.
I've tried using the shift key when I open iTunes to set up two separate .itl files to no avail.
Is there a way to have two different iTunes for two different iPhones on one Windows User account?
Thanks!

What happens if you rename the iPhone "Wife" when it shows up as "Hubby", then choose a different set of apps/playlists to sync with? iTunes is supposed to be able to manage multiple devices, each with their own selection of content. Perhaps you "restored" "Wife" with a backup from "Hubby" when you first set things up which is now causing confusion.
To create a new library press and hold down the shift key as you click the icon to start iTunes and keep holding shift until asked to choose or create a library. You need to use the same technique to switch back.
tt2

TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

I have lost my installation disk for my mac book pro running Snow Leopard 10.6." Where can I replace it?"

I have lost my installation disk for my mac book pro running Snow Leopard 10.6." Where can I replace it?"

You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

TS4268 Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Pls.he

Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?

Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have.

Hi - have lost my Install DVD for my macbook Pro - can I use the one from my husbands Macbook or how do I get a new one??

Hi
Have lost my Install DVD for macbook pro and need it because my computer black out all the time - can I use the one from my husbands macbook (not pro) or how do I get a new one???

10.6 Snow Leopard ?
You can call Apple and order one. 1-800-275-2273
You cannot use an install dvd that is shipped with another computer.

We have been loyal Verizon customers for about six years and need someone to investigate the amount of stress we have been put through by them in the last two or three weeks!HELP!Who do we go to?

We have been loyal Verizon customers for about six years and need someone to investigate the amount of stress we have been put through by them in the last two or three weeks!HELP!Who do we go to?

What problem are you having with your service or device? (Removed)
Message edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

I have lost my login information for cellular data account. How do I retrieve it?

I have lost my login information for cellular data account. How do I retrieve it?

I called AT&T at 1-800-331-0500 and asked for IPad support. They are going to send me a new SIM card. This will solve the problem. Thanks for your help.

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

I have lost 6 of 13 episodes for two different shows, and am losing my mind

Similar Messages

Maybe you are looking for