I have lost AirPlay and sharing with my PC since accepting a software upgrade to the TV yesterday. I have tried restoring and reinstalling this software but this failed to solve the problem. Any suggestions would be very welcome.

I have lost AirPlay (with iPad and iPod touch (new) both on os5 ) and sharing with my PC (uptodate iTunes) since accepting a software upgrade to the Apple TV yesterday. I have tried restoring and reinstalling this software but this failed to solve the problem. Any suggestions would be very welcome.

IEP1 wrote:
I have lost AirPlay (with iPad and iPod touch (new) both on os5 ) and sharing with my PC (uptodate iTunes)
Check your Windows settings along this contribution from Chrism0:
https://discussions.apple.com/message/16568477#16568477
Also check that the ports 5353 and 5354 (Bonjour (mDNSResponder), AirPlay, Home Sharing, Printer Discovery) are open on Windows Firewall.
Lupunus

Similar Messages

  • My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
    Mac OS X 10.6 Help: Reinstalling Mac OS X

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • I am trying to download Adobe Flash Player but it won't download, are there any suggestions?

    I am trying to download Adobe Flash Player but it won't download, are there any suggestions?

    What is your operating system, version & edition?
    What is your browser, version & edition?
    Can you try downloading the full installer(s) for your environment from http://forums.adobe.com/thread/909550 ?

  • Last night while I was using my MacBook pro, it suddenly restart itself and it hang at the white screen. I tried to restart 5-6 times but it appeared to be the same result! Help me!!!,!,

    Last night while I was using my MacBook pro, it suddenly restart itself and it hang at the white screen. I tried to restart 5-6 times but it appeared to be the same result! Help me!!!,!,

    Boot in safe mode

  • It doesn't seem to be as sharp as it is in the "Develop" mode.  This seems to occur more with wide angle than macro.  Any suggestions would be extremely welcome...Norm

    Here's my problem: (Lightroom 4)  I will edit a photo in "Develop" to the point where it looks great and I'm satisfied with the results.  Then I click back to "Library" and the photo seems to go a little out of focus.  When I export the photo, it doesn't seem to be as sharp as it is in "Develop" mode.  This seems to occur more with wide angle than macro.  Any suggestions would be greatly appreciated!  Norm

    Okay guys, some good news!
    First of all, thanks again to Sean for his suggestion to look inside the transaction log!
    Indeed that specific table that I noticed was filling the transaction log, is the largest table in my database. Its size stands at about ~65GB. Like I said earlier, it has no LOB or Overflow columns. But one interesting fact about it is - it had absolutely
    no indexes! It was a heap, but it was also partitioned. I didn't know a case like this could cause such problems with shrink? It's weird but it also kinda makes sense in a way.
    Anyways, I ran a script to create a partitioned clustered index on that table. That took pretty much all day long due to the table size (almost 7 hours). But once that was finished, shrinking the data file was a breeze!
    At least... Until the shrink started "hanging" again because now it started dealing with my
    second largest table (~55GB). Like the first one, this one is also a partitioned
    heap without any indexes. So I expected this to happen. I guess the solution this time will be the same: Create a clustered index.
    Does this make sense to you? A partitioned heap table causing such heavy workload to SHRINK, but when it's moved to a clustered index, suddenly it flies?
    Eitan Blumin; SQL Server Consultant - Madeira SQL Server Services

  • I'm receiving and error (-50) when trying to open itunes 10.5 beta on OSX 10.7 beta. Any suggestions would be greatly appreciates!

    I'm recieving and error (-50) when trying to open itunes 10.5 beta.  Any suggestions would be greatly appriciated!!!

    As a registered developer which should be the only way you have access to the iTunes and iOS BETA, you have access to direct communication with the appropriate Apple personnel and/or access to the Apple forums for registered developers.

  • HT201210 im trying to restore my i phone 4s and on the final step it says 'the "iphone" could not be restored. an unknown error occurred (9). ' ANY HELP would be very welcome !

    can anyone help me with this restoring problem ?

    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • Trying to update an Iphone 4 to IOS5 keeps giving error 3525. Any suggestions would be helpful.

    I am trying to update my Iphon4 to IOS5 but keep getting error 3525. Does anyone have a suggestion???

    This normally indicates a network issue! Could be timing out due to lack of internet speed, security software could be interupting the connection, or the computer can not process the internet as fast as most! the following link should provide some idea's:
    http://support.apple.com/kb/TS3694#error3200
    Hope I was of some help

  • Been using Firefox for years, deleted Babylon app & now I can't launch Firefox at all. I've uninstalled & reinstalled Firefox, rebooted, but that didn't solve the problem. Am I condemned to IE?

    On 3/18 I used Firefox to download a translation app called Babylon to my Dell Latitude laptop - running XP Pro. I checked out the app, got all the pop-ups asking me to buy spinoff products & uninstalled Babylon. When I rebooted I couldn't open Firefox.
    I started investigating, came up with a weird Pareto Logic UUS error, fixed that. Unistalled Firefox through the Control Panel. Used IE to again download & install latest Firefox. At the end of installation, the dialog box askes "Lauch Firefox now?" which I checked & clicked the Finish button. Nothing happened. I rebooted & tried to launch Firefox from the Start menu, then from the root .exe - no luck. IE launches fine; I just want my Firefox back!

    i wish i could paste the error message but it is

  • Problem with replies in Maverick's mail.  Originating emails send fine.  When replying to an email (various addresses) the reply is hung up and can not be sent.  Option becomes put in draft, delete, etc.  Any suggestions would be helpful

    Problem with replies in Maverick's mail.  Originating emails send fine.  When replying to an email (various addresses) the reply is hung up and can not be sent.  Option becomes put in draft, delete, etc.  Any suggestions would be helpful.  Mid 2013 iMac.

    I don't know how rare this is.  I went a week or so without a problem, and now it's starting to recur.  Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on.  Further, it will send the same email over and over during this madness.
    This is a show stopper.  If there isn't a software fix soon, I may chuck this phone in the garbage.
    Post relates to: Treo 800w (Sprint)
    UPDATE:  The problem comes and goes.  The next day, no changes to the treo, everything workeds.  Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming.  I've since turned off roaming, and haven't had a problem for several days.
    Message Edited by slrichardson on 12-22-2008 01:12 PM

  • I have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks

    i have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks
    i cant login anywhere as all my passwords are saved in firefox, i cant even access teh firefox preference to get my password, it's so sad

    You likley have a corrupted Firefox preference or other support file in your User/Library folder.
    Programs load these files from the user account to adjust to user specifications, instead of having multiple copies of the same program on the machine.
    So when you reinstalled Firefox, it reinstalled the progrma only and the user support files remained from before.
    To prove this point, use System Preferences to create another Admin account and log into it, Firefox should run like a charm.
    To remove the Firefox support files from the problem user account your going to need to locate these files and delete them one at a time and try FF again and again.
    The first one you shoull try is your FF .plist file located in your User/Library folder.
    Clicm on the Finder and use the Go > Go to Folder and paste this
    ~/Library/Preferences
    and press Go.
    Now scroll down until you see the Firefox or Mozilla .plist file and Trash it, quit and restart Firefox, it will recreate the preference file with default settings you will have to reset it.
    Next run through the list of fixes #1-13 here before proceeding.
    https://discussions.apple.com/docs/DOC-3353
    If you need help deleting other FF files, download the free Easy Find from MacUpdate.com and search for anything "Mozilla" or "Firefox" in your User account only and take your chances you hopefully won't delete your password file in the process.
    You should have site passwords written down someplace and locked up tightin case you need them, a computer isn't totally safe and reliable.

  • Why does iPhoto/Aperture keep deleting photo sets from my Flickr account or keep placing whole sets back into the Pending stage of uploading the photos. This is becoming very frustrating and extremely time consuming. Any help would be most welcome

    Has anyone got any idea as to why Iphoto/aperture keeps deleteing my photo sets from my Flickr account without warning or reason given. Also when I enter my sets the program will revert all of the photos back to the Pending stage of the up oading process. One or two photos I could live with but some of my set are in excess of 1500 photos per set, and this becomes very very time consuming to re upload them. and whats more annoying on some occassions after spending 12 to 16 hours re uploading them I find that they have all been duplicated. Is there a Bug with Iphoto or Aperture????????
    any help would be most welcome P Jefferys

    I am using Iphoto version 9.5.1, and No I am not deleting any photo from any file. what happens is this :- I open up Iphoto and enter my flickr account via the shared folder icon on the left hand side of the screen this is when I get a pop up screen from Iphoto informing me that they have removed a SET of photos from my Flickr account (no reason given) when i go into that set all I can see is dashed empty square where the photo used to be. I will then get another pop up screen saying that Iphoto can no longer access my flickr account and will I permit a reconnection and allow Iphoto to access my flickr account (add pass words etc) when I get back into flickr the SETS have gone and all other photos enter the Pending stage again. After re uploading the missing photos I find that some 50% of them have been duplicated.
    PJ

  • Just purchased and downloaded pe 13. While installing, I found out pe13 is not compatible with my OSX 7.5 system. Any Idea's on how to swap for pe 12? It's not available on the Adobe web site. Any suggestions would be appreciated. Thanks

    Just purchased and downloaded pe 13. While installing, I found out pe13 is not compatible with my OSX 7.5 system. Any Idea's on how to swap for pe 12? It's not available on the Adobe web site. Any suggestions would be appreciated. Thanks

    daleroach
    Adobe is not going to swap 13 for 12. It is selling only 13 download as you found out. So, you are going to have to purchase 12 if you want to use that program. It may still be available at some retail locations, such as Amazon.
    If you are within 30 days of purchase and have purchase the download from Adobe, then contact Adobe via its Adobe Chat to get a refund. To do that, click on the following link
    http://helpx.adobe.com/sea/contact.html?step=PRE_membership-account-payment_payments-invoi ces-orders_stillNeedHelp
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    If the link does not hold its set, then you will need to navigate to Chat Panel using the above titles as guides.
    Please let us know if you are OK with the above. If any questions or need clarification, please do not hesitate to ask. Reminder..we are not Adobe. This is a user to user
    forum with an undefined frequency of an Adobe presence in it.
    Best wishes
    ATR

  • I've updated my iPhone 6 with iOS 8.3  after that i have lost all iCloud shared albums on phone but i sill have those albums on mac book and on phones of people i had shared with

    I've updated my iPhone 6 with iOS 8.3  after that i have lost all iCloud shared albums on phone but i sill have those albums on mac book and on phones of people i had shared with

    You need to update iTunes to 11.1 on your PC

Maybe you are looking for

  • Could not save file

    Hi When I place a .psd-file in Indesign and option + click on it, the image opens in Photoshop. When I try to save the PSD-file, from time to time I get the message: "could not save the file because it is already in use or was left open". I can only

  • ADF 11g custom PageLifecycleFactory not effective

    to custom ADF FacesPageLifecycle,before 11g can regist custom ADFPhaseListener to create custom FacesPageLifecycle. but in 11g ADFPhaseListener had Deprecated. in Oracle Fusion Middleware Java API Reference for Oracle ADF Lifecycle, i found ServletFa

  • IPod nano 7th generation can't on

    I can't on my iPod nano 7th generation, after i connected it to my PC.

  • The buttons in main the vi get locked after opening a vi reference in a subpanel and using buttons within the subpanel.

    I am trying to open a reference to a vi in the subpanel of the main vi. However after the vi opens in the subpanel and after pressing a few buttons in the subpanel the buttons in the main vi get locked, i.e. I can't even close the main vi or control

  • Cant view java or applets

    hi..im looking for help.....just recently....i can NOT view applets or java on my pc......i get a white box with a little symbol in the top corner.......whats happened? any ideas??? i make webpages..and have used anfy from time to time..with no probl