I have lost my external drive on desk top. How do you remount the external drive

I have lost my external drive from iMac desk top. How do you remount the external drive?
WindyCityNorth

Kappy Thanks for help.. I had already tried the Disk Utility but external drive did not show. What worked was to shut down every thing and shut off power to all. Disconnect power to the external drive. Connected power to computer and then restarted the computer. After the computer was up and running, I reconnected power to external drive and then turn it on. At this point the external drive returned to my desk top

Similar Messages

After i designed a website for desk top how do i save the site for cell phone

after i designed a website for desk top how do i save the site for cell phone use

I don't think you can simply save a desktop design as a cell phone design. While in Muse and in the site plan view for you website you should see three tabs near the top of the page. If you click the "Phone" tab, you will get a pop-up dialog box asking which element you would like to copy over from your desktop site (if any). You must then design the site for cell phone use. You can use the same objects, pictures, etc. from your desktop site and Muse should automatically optimize those elements for phone use. However, Muse does not automatically take a desktop design and create a cell phone design from it.
As I understand it, Muse uses user-agent detection to decide which site it wants to display to the user. You however, need to create the different versions of your site so that Muse can apply a specific design for the intended use.

HT1923 how do you get the dvd drive back after installing itunes to windows 7

How do you get the dvd drive back after installing itunes to windows 7??

Safari/Preferences/General and set a new default.

This is going to sound mad but how do you open the disk drive on a new macbook pro

HELLO
I can't find how you open the disk drive on my new macbook pro can someone please advise

See if these guys have directions:
http://www.ifixit.com
http://www.ifixit.com/Answers/View/7984/open+dvd+drive+for+cleaning+or+removal
Of course you can google.

HT4623 My iPod don't have software update link under general menu? How do you update the latest version

My iPod don't have software update link under general tab How do you update the latest version?

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models

HT3275 How do you Format the external hard drive been used for time machine?

Error reads "Not enough space on the external hard drive" How do i format the memory and start again?
Thanks Geremy

ON an external hard drive.. that is easy.. just open disk utility and reformat it. Make sure you use Mac Extended Journeled. (HFS+)

HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

How do you rename the Windows drive in Mac?

I have Windows loaded in BootCamp, but it appears in Mac as 'untitled'. How can I rename it to 'something_XP'?
Many thanks for any help. I am using Lion, highest updates, Bootcamp with Windows XP. The drive on the HD (shared in an iMac 24") is actually named, but the name in Mac is 'untitled'.

Yo Rename it in Windows; RightClick the C: drive object for Rename selection

Help! How do you get the cd drive bay out of the Pismo?

I just bought a new LG CD-RW/DVD drive (hope it was a good choice), but I can't find any info on how to get the old one out and put the new one in.
There is lots of data on the four easy screws to remove for replacing the drive once it is out of the laptop, but no data on how to get to it while it is still under the keyboard and inside the Pismo?
Little Fish in a Big Mac Pond
Pismo G3 PowerBook 400Mhz Safari; iMac G3 DV 400 Mac OS 8.6 or Earlier Pismo OS X Safari; iMac OS 8.6

Little Fish,
A properly working lever will have resistance as it pushes the whole drive mechanism out of the bay. It looks like the lever opens about 45º on my Wallstreet before it starts to eject, then reaches a full 90º with the drive protruding about 1/2 inch...you can then grab the drive and pull it on out.
If the drive feels like it is not going to move after applying moderate pressure, disconnect all power and cables (only so you do not damage them), turn the 'book so the drive bay hangs over the edge of a table. You can now get your fingernails under the back edge of the drive on the bottom and help pull it out while using the lever.

I have lost my one on one card. How an I get the registration number?

Anyone know how I can find out what my one on one number is? I never registered it and now I cant find the card. I have the receipt...

The ipad is not a storage/backup device. The sync is one way - computer to ipad. The exception is itunes purchases: File>Devices>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for this very occasion. Use your backup copy of your computer to put everything back

How do you confirm the hard drive speed

I am trying to confirm my hard drive speed. I have looked at "about this mac" but can't seem to find it. New MBP 15 inch running Lion

found it.
About this mac, more info, system report, serial-ATA, then scroll down to the nformation about the apple HDD, and there it is under "rotational rate"

How do you eject the second drive if I were to upgrade?

Hey guys,
I love my new mac pro. If I were to install a second optical drive, how would I eject that? Press the eject key twice or something?
Thanks
Mo

Never mind
http://docs.info.apple.com/article.html?artnum=304526

At the end of test, how do you set the DAQ driver output to zero.

I'm a new LabVIEW user,I'm reviewing an existing program that has a clearall.vi which supposed to set the DAQ output 6025E to zero volts at the end of each test. But after turning the power supply off to UUT, the Vcc on UUT still measures between 2-3.5v I checked some of the output Port A-C and DIO still puts out 5.1v. I checked the output port bit status in the program and says it sets at zero logic. Confused and thanks for your help.

Hello,
Unfortunately, I am unfamiliar with the clearall.vi. If it was not a VI that was created by National Insturments, then we will not be able to support it. If it was, maybe you could direct me to where I could find it.
What it sounds like you want to do, however, is to ensure that your digital outputs are placed at 0 when your application completes. Are you using a digital I/O device, which one? When a digital line is written to, it will retain that value untill it is written to again or reset. Therefore, I think what you want to use is the Device Reset.vi. This VI will return your digital lines to their default value. The knowledgebase titled "What is the State of My Digital Lines After Performing a Digital Output Operation?" and located http://digital.ni.com/public.nsf/websearch/E309E3FCC758DB1586256C8600702CE1?OpenDocument talks more about this.
By the sounds of it, you have your digital lines from your device connected to the Vcc line on your UUT, and that a voltage is still being provided even after no power is supplied to that unit. What you may want to do, just as a test, is to manually tell the device to write a zero, and then measure the same readings that you currently are to compare them.
Post back to this forum if you have further questions after reading this discussion.
Sincerely,
Jared A.

Hey, this is a question that a few lingering google searchers have been stumped with.....How do you get the mourse cursor arrow icon that is white, to fade or disappear while watching iTunes visualizer?

I like having thw whole screen background black for the cool visualizer....

After a little more research in this forum, I found another user reporting the exact same problem... solved by downloading the Perian component for Quicktime. I downloaded Perian and it worked great! Problem solved.
Kudos and thanks to the users in this forum.

I have a broken screen on my 2008 MacBook, I want to access the hard drive what are my options?

I Have a 2008 MacBook with a broken screen, how can I access the hard drive?

1. Connect an external monitor. If everything else is working fine on the MacBook, you'll have full access to your computer. Or
2. If the MacBook has a FireWire port, use Target Disk Mode (http://support.apple.com/en-us/HT1661) to mount the HDD and then copy the files to the second Mac. Or
3. Remove the HDD, put it in a $20 USB caddy, and connect it to another Mac for file-retrieval.
By the way, this forum is devoted to vintage Classic operating systems that Apple retired over a decade ago. More people will see your posts if you put them in a forum devoted to your particular level of OS X (Leopard or above for a 2008 MacBook).

I have lost my external drive on desk top. How do you remount the external drive

Similar Messages

Maybe you are looking for