I have lost my itunes on the latest upgrade from itunes, i've tryed to uninstall everything apple that did not work.

i have lost my itunes when installing the new upgrade,it says i have to install msvcr80.dll. i tryed to uninstall everything apple but that didn't work , they won't uninstall. i'm not very computer savy, i only use itunes for my ipod and play some games

Hello confused86,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Similar Messages

  • I am trying to log into my apple account and it is telling me my account is disabled.  How can i get it enabled again?  I have tried resetting my password and that did not work.

    I have tried to log into my apple account so I can download my songs onto my iPhone.  It keeps telling me my apple id is disabled.  I've tried resetting my password but that did not work.  How can I fix this?

    After resetting your password you might then need to log out of your account on your device by phone on your id in Settings > Store (Settings > iTunes & App Stores if it's on iOS 6) and then log back in so as to 'refresh' the account on it
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
    I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
    In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
    Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
    Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
    Hope this helps!

  • I am uploading an Excel Workbook (xlsx format) to convert to a pdf and it has taken over an hour and it is still not uploading. I have even tried to restart it and that did not work.

    I'm trying to upload an Excel Workbook (in xlsx format) to have it converted to a PDF file and that little circle has been spinning forever. I tried to restart the process but it did the same thing. So I tried to open up each individual worksheet of the workbook and save them individually. I "think" I got that to work, but when I go to the combine tab, I see the four pages that I have selected with spinning "thinking" circles on all of them. Please help. I have a client waiting for this proposal and I don't know what to do!
    LisaWoz

    Hi Lisa Wozniak,
    Are you on a slow Network Connection? I would recommend you to Clear the browser Cache and History and  then try again or try using a different browser on a different Network Connection.
    Let me know if it works or not.
    Regards,
    Rahul Tyagi

  • I just bought a new ipod nano and although ,it will show that it is syncing, none of the music from my i tunes made it onto the nano , I tried restarting my computer and that did not work.  any ideas?

    I just bought an ipod nano. I cannot sync it . It will say on the screen that it is syncing and that it is finished but then there is not music on it from my computer. Can anyone helo me?

    As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.

  • TS1398 my wifi connection on our mini ipad is grayed out and cannot connect to wifi, I have tried resetting and that did not work.

    Our wifi  is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?

    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
     Cheers, Tom

  • I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • I try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?

    i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
    please what i do

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • TS1967 I downloaded the latest upgrade of iTunes. Now iTunes won't open at all.

    I just downloaded the latest upgrade of iTunes (v64). It seemed to download without problems but now IT WILL NOT OPEN AT ALL. Anyone else have this problem?

    Hi jowirosales,
    Thanks for visiting Apple Support Communities.
    There are a few possible reasons why iTunes does not recognize your iPod. See this article for in-depth troubleshooting steps that can help:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    All the best,
    Jeremy

  • Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Hey there Ray Neilson,
    It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues in Windows
    If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
    Try the steps to troubleshoot iTunes Store connectivity in Windows.
    As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
    Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
    You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
    Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
    Drag the original hosts file to your desktop.
    Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, choose Edit > Select All.
    Choose Edit > Delete.
    Choose File > Save.
    Close Notepad.
    Right-click the duplicate file, and choose Rename.
    Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the iTunes Store.
     If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
    If the issue persists, try the troubleshooting in this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have lost all artwork since the recent upgrade, is there a way to refresh the 160gb classic ?

    I have lost all artwork since the recent upgrade, is there a way to refresh the 160gb classic ?

    You'll have to restore the iPod to factory settings.  Then sync all your content from your iTunes library back over to it.
    B-rock

  • I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

    I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

    I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
    [https://www.mozilla.org/en-US/firefox/new/ Firefox]
    [http://kb.mozillazine.org/Installation_directory Installation Folder]
    [http://kb.mozillazine.org/Profile_folder Profile Folder]
    Please note that using system restore would usually damage the Firefox installation.

  • My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    Hello, VvioletT. 
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues syncing your iOS device.  Here are a couple articles that I would recommend going through when experiencing this issue.
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/ts3125
    Cheers,
    Jason H.

  • HT1926 iTunes won't install everything it needs to run.  I remove it from my computer and reinstall it and it keeps saying it.  I am using Windows 7 and the latest update from iTunes.

    iTunes won't install everything it needs to run.  I remove it from my computer and reinstall it and it keeps saying it.  I am using Windows 7 and the latest update from iTunes.

    What does the error message say when you install iTunes and it fails?
    This post was edited by Malignance

  • On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.

    On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.
    MoragaTom

    I have the same problem on my iPhone - an app I want to delete but can't. The app in question doesn't show up on the list of apps i iTunes and doesn't show an 'X' when it starts to wiggle. All the other apps do, but not this one. It's definitely an app. How do I get rid of it, please?

Maybe you are looking for

  • HR ABAP - update infotype 1001

    Hi, I am trying to update position of external person using function RH_UPDATE_INFTY_1001_EXT but it doesn't update neither it does give any error. Below is my code: hold_HSU_1001 like p1001. loop at hold_HSU_1001.     case hold_HSU_1001-sclas.      

  • Default buttons not defaulting

    Hello. I am on the tail end of a DVD project and just begain encountering some unusual behavior with certain menus. This is a multiple-menu, multiple-video clips promotional DVD. Up to last week, the DVD has been working as expected in the simulator,

  • HOW DO I SOLVE THIS PROBLEM. MY IPHONE 3G IS STOCK IN RECOVERY MODE. HOW DO I GET IT BACK ON TRACK?

    HOW DO I SOLVE THIS PROBLEM. MY IPHONE 3G IS STOCK IN RECOVERY MODE. HOW DO I GET IT BACK ON TRACK?

  • How do I modify the test of an enumeration programmatically?

    Hi everyone, I have an application with 8 scopes on it and the data displayed on the scope is selected by a drop down menu which is an enum control that is a typedef.  Since this application interfaces with different hardware, I need to be able to ch

  • Migration to Shared Services

    Has anyone had much luck migrating security to shared services? Or have you had to just recreate your security in the new system? We're trying to migrate from Hyperion 7.1(Essbase, Analyzer, Intelligence) to Oracle EPM 11G and are running into some i