I have lost scroll bar on 1 website only since upgrade to version 19 and the words run off the page

Only 1 website affected. Scrollbar is missing and words run off page. If I minimize the screen, then maximize, the site returns to normal. If I leave the page, refresh the page or click on a topic to read (it's a sports message board) I lose the scrollbar again until I minimize-maximize. I have disabled all add-ons 1 at a time and all together. That doesn't help. Any suggestions? Other Firefox users are apparently not having this problem on the same website.

Are you running any add-ons that might change the appearance of the page, e.g., add-ons that block ads, Flash, scripts, etc.?
Sometimes you notice glitches in Firefox related to graphics card driver incompatibilities. To rule that out, you could disable hardware graphics acceleration. You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
After restarting Firefox, do you notice any difference?

Similar Messages

  • I have lost scroll bar on right hand side of the playlist, how can I get it back?

    I have lost the scroll bar on the right hand side of my playlist. Does anyone know how to get it back?

    This issue can be caused by the Babylon Toolbar extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Is it possible to have a scroll bar in a view

    Hi
    I have a bam dashbaord and it is having 4 different views(Graph Type) .One of the views is a bar chart. This graph shows up a large amount of data and bars are getting squeezed.Is there anyway we can have a scroll bar in the view so that bar charts will not get squeezed.
    Any help would be highly appreciated.
    Thanks
    Laj

    Have you been able to do this? I have a similar requirement. Please reply if you have found a way to do this.

  • I have no Scroll bar in the font menu in adobe illustrator CS5.1

    Is there any way to make this scroll bar appear? I can't each time try font by font to find the suitable one.

    Marilynn,
    Hopefully, you will not have to go far down this general list.
    You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Hi! I have no scroll-bar anymore. how can I reactivate this??

    hi! I have no scroll-bar anymore. how can I reactivate this??

    Yeah. That's OS Lion for you. No scrollbarzoom anymore. No idea why they disimplemented that - but it is in Lion only, not a Logic thing. 9.1.6 + Lion = no scrollbarzoon, Logic 9.1.6 + OS SnowLeopard = scrollbarzoom.
    It zucks, I know.

  • Scroll bar on the right is off the screen. How is this fixed?

    In the 11.0.1 version of iTunes, when I go to full screen, the window is too big and the scroll bar on the right is off the screen. Can this be fixed, or do I have to wait for the next version?

    Yep. For all us spreadsheet geeks, this is a real sinker. Anyway, here's my workaround. Not free, unfortunately. I have a macro program called QuicKeys installed on my Mac that I've used for countless years, and  which I highly recommend for other reasons. Anyway, one of QuicKeys' many features is simulating a scroll wheel using the keyboard. I have it simulating a cell-by-cell scroll using cmd-arrow keys. The only drawback is that I have to release the cmd key each time I want to move another cell.

  • Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL.

    Firefox 33.0.2 on Windows 8.1 64 bit. Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL and hit <enter>, in which case nothing happens at all.
    I have found that issue reported for Ubuntu (https://support.mozilla.org/en-US/questions/1011935?esab=a&as=aaq) but not for Windows. The solution there to change the keyboard is not feasible since it's a laptop with a built-in keyboard.
    I did not have this issue with FF 28 (I finally upgraded because I was getting BSODs) and I don't have this issue with any other Browser on same platform.
    Any help appreciated.
    Thanks.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.  Tried holding button and replugging USB cable, but did not fix it.

    Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.  Tried holding button and replugging USB cable, but did not fix it.

    Hi
    Chamie7 wrote:
    Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. 
    I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
    If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
    CCT

  • I have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.

    i have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.

    Try this ..
    On your Mac open System Preferences > iCloud
    Deselect the box next to:  Notes
    Then reselect it.
    Give iCloud a few minutes to re sync the data.
    Other than that, try Time Machine >  http://pondini.org/TM/15m.html

  • I seem to have lost most of my 9000 photos when I upgraded to Yosemite 10.10.3. iPhoto won't work now and says it needs an upgrade not available in the UK. Only a few of the 9000 photos appear on Photos! HELP?

    I seem to have lost most of my 9000 photos when I upgraded to Yosemite 10.10.3. iPhoto won't work now and says it needs an upgrade not available in the UK. Only a few of the 9000 photos appear on Photos! HELP?

    Move the incompatible iPhoto version to the Trash, before you try to reinstall from the AppStore, but don't empty the Trash.
    update as described here:
    Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
    The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore Purchases tab with ⌘R, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.

  • I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

    I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

    You might want to download something called an undelete utility. These can find files and recover them even after they appear to have been lost. There are some undelete utility programs that are free. Look at tucows.com
    Also, it appears that you have POSSIBLY overwritten the actual files, which you moved manually, with I don't know what, which you moved in PSE's folder location view.
    Next, in the future ... NEVER (that's: don't even think about it) move your photos in Windows. NEVER. NEVER. Not ever. Not once. This always (that's ALWAYS, as in 100% of the time) causes problems and usually makes things difficult to fix.
    Lastly ... make regular backups! I must say this in the forums about seventy bazillion times a month. Make regular backups! Regular depends on how often you take photographs and edit them. Since my photographic activity usually happens on the weekends, I make backups every Sunday night. You may need a different schedule, depending on your activity level. MAKE REGULAR BACKUPS!

  • HT1379 I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    Welcome to the Apple Support Communities
    Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store

  • HT204053 I have a acount created on this website,, only i can't apps download in the app store

    I have a acount created on this website,, only i can't apps download in the app store

    Erm, helps to let us know what happens when you try.

  • I deleted my iCloud because I thought it was not working and I have lost all my phone numbers, how do I get my numbers and/ my account back

    I deleted my iCloud because I thought it was not working and I have lost all my phone numbers, how do I get my numbers and/ my account back?

    i had te same problem, funny it worked too... 
    next questions i have:
    my msn contacts (emails) show up in my calling countact in the iphone, i would like to not see them here, how can i get rid of them?
    i would like my phone number contacts to be saved in outlook in the event i forget my phone home!  is this possible as the only way i see to access them is by the phone...
    thanks alors!

  • Seem to have lost air play ability via apple tv after upgrading to iOS5

    seem to have lost air play ability via apple tv after upgrading to iOS5

    Nope, i was able to download it in the Middle East...
    Apple always releases updates to everyone in the same time... (unlike Android and Nokia)
    Something is wrong...
    What ou can do is unplug the appletv from the electricity and the hdmi, plug it ony to your laptop using a mini usb plug (the one used by many cameras and tech devices)...
    Open itunes, find the apple tv, click on restore and let it download from laptop...
    That oughta update the firmware to 4.4.1...

Maybe you are looking for

  • Query transport from dev to qlty giving transport error

    Hello Xperts, I am facing a problem while transporting a query from dev to qlty. below is the error i am facing... Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)   Element 4620F4R3R2BI818DARVFRP91N was

  • Unknown Group - Causes Finder Crash - How do I change group?

    Many directories and files on my system after installing Leopard have an "Unknown" group and when I open a "Get Info" window on them and click the "Add" button the beachball appears and Finder crashes. MacFixit stated "This problem appears to be due

  • LOV gives jbo-25013  in 9.0.3

    Hi, We have migrated our project from 9.0.2 to 9.0.3 (preview 988). In our JClient we have a button lov-binding to select a new record in the form. If we try this JClient in 903, selecting another record in the lov-window gives this error (oracle.jbo

  • Combine standard task (ABAP method call) and additional UWL Action Handlers

    Hi, i have defined a task with an asynchronous ABAP method call and a terminating event which i want to use "as is" in the universal worklist, that means that the standard action has to be the ABAP method call defined for the task. In addition to tha

  • I have 10.5.8 and need to go to Lion

    I have leopard 10.5.8 and need to go to Lion latest.