I have lost the link to the backlight on my keyboard of my macbook
I have lost the backlight of my keyboard and when I go to the 'keyboard' in System Preferences, there is no link. Is it possible to lose this information by using a 'disk sweeper'?
Very straightforward. 10.6 by default does what's called an archive and install, it will only replace your system, you won't lose any files. Just to be safe though you should ALWAYS make a current backup before making any changes in the event that something does go wrong.
Insert your 10.6 disc and restart while holding the C key, should be pretty painless. Remember to run software update when the install is done to get up to date.
Similar Messages
-
I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?
Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2. -
TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
and extracting .. found Error1 at the point Verify firmware . AGAIN AND
and this is the log ..
2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
[13:47:25.0555] Changing state from 'Idle' to 'Restoring'
[13:47:25.0555] device software does not support nonce generation
[13:47:25.0555] requested restore behavior: Erase
[13:47:25.0570] requested variant: Erase
[13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:27.0333] <DFU Device 0562C260>: production fused device
[13:47:27.0333] requested restore behavior: Erase
[13:47:27.0333] device software does not support nonce generation
[13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
[13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
[13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
[13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
[13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
[13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
[13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
[13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
[13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
[13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
[13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
[13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
[13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
[13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
[13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
[13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
[13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
[13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
[13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
[13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
[13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
[13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
[13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
[13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
[13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
[13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
[13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
[13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
[13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
[13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
[13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
[13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
[13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
[13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
[13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
[13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
[13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
[13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
[13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
[13:47:27.0942] WinDFU::UploadData: ZLP
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:30.0968] WinDFU::ResetDevice: resetting...
[13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
[13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
[13:47:31.0046] Finished DFU Restore Phase: Successful
[13:47:31.0218] DFU mode device disconnected
[13:47:31.0218] Device removed when in state Restoring, moving device to transition state
[13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
[13:47:31.0218] Creating timer to monitor transition
[13:47:32.0175] DFU mode device connected
[13:47:32.0175] Transitioning device returned, continuing restore.
[13:47:32.0175] Canceling timer
[13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
[13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
[13:47:32.0175] requested restore behavior: Erase
[13:47:32.0175] requested variant: Erase
[13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
[13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
[13:47:33.0532] requested restore behavior: Erase
[13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
[13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
[13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
[13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
[13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
[13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
[13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
[13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
[13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
[13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
[13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
[13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
[13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
[13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
[13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
[13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
[13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
[13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
[13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
[13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
[13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
[13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
[13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
[13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
[13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
[13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
[13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
[13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
[13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
[13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
[13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
[13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
[13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
[13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
[13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
[13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
[13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
[13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
[13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
[13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
[13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
[13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
[13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
[13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
[13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
[13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
[13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
[13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
[13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
[13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
[13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
[13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
[13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
[13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
[13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
[13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
[13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
[13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
[13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
[13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
[13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
[13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
[13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
[13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
[13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
[13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
[13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
[13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
[13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
[13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
[13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
[13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
[13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
[13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
[13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
[13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
[13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
[13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
[13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
[13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
[13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
[13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
[13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
[13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
[13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
[13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
[13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
[13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
[13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
[13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
[13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
[13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
[13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
[13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
[13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
[13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
[13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
[13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
[13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
[13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
[13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
[13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
[13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
[13:47:35.0732] WinDFU::UploadData: ZLP
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:38.0758] WinDFU::ResetDevice: resetting...
[13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
[13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
[13:47:38.0836] Finished DFU Restore Phase: Successful
[13:47:39.0039] DFU mode device disconnected
[13:47:39.0039] Device removed when in state Restoring, moving device to transition state
[13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
[13:47:39.0039] Creating timer to monitor transition
[13:47:41.0674] Recovery mode device connected
[13:47:41.0674] Transitioning device returned, continuing restore.
[13:47:41.0674] Canceling timer
[13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
[13:47:41.0684] requested restore behavior: Erase
[13:47:41.0684] requested variant: Erase
[13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:42.0528] iBoot build-version = iBoot-1940.10.58
[13:47:42.0528] iBoot build-style = RELEASE
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
[13:47:42.0543] AMDeviceIoControl: pipe stall
[13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
[13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
[13:47:42.0543] radio-error not set
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] interface has 1 endpoints, file pipe = 1
[13:47:42.0543]
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
[13:47:42.0606] unable to open device_map.txt: No such file or directory
[13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
[13:47:43.0994] unable to open device_map.txt: No such file or directory
[13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
[13:47:43.0994] AMDeviceIoControl: pipe stall
[13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
[13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
[13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
[13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
[13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
[13:47:46.0958] unable to open device_map.txt: No such file or directory
[13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
[13:47:46.0958] Finished Recovery Restore Phase: Successful
[13:47:48.0409] Recovery mode device disconnected
[13:47:48.0409] Device removed when in state Restoring, moving device to transition state
[13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
[13:47:48.0409] Creating timer to monitor transition
[13:47:52.0895] RestoreOS mode device connected
[13:47:52.0895] Transitioning device returned, continuing restore.
[13:47:52.0905] Canceling timer
[13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
[13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
[13:47:52.0905] requested restore behavior: Erase
[13:47:52.0905] requested variant: Erase
[13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:53.0792] requested restore behavior: Erase
[13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0792] device did not return saved USB log
[13:47:53.0792] device did not return saved panic log
[13:47:53.0792] previous restore failed with exit status 0x100
[13:47:53.0792] connected to service com.apple.mobile.restored
[13:47:53.0808] using protocol version 13
[13:47:53.0808] unable to open device_map.txt: No such file or directory
[13:47:53.0808] board config = n42ap
[13:47:53.0808] no value returned for BootArgs
[13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
[13:47:53.0824] no value returned for MarketingPartNumber
[13:47:53.0824] _copyDeviceProperty() failed for mpn
[13:47:53.0824] requested restore behavior: Erase
[13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
[13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
[13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
[13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
[13:48:10.0360] L2TP domain init
[13:48:10.0360] L2TP domain init complete
[13:48:10.0360] PPTP domain init
[13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
[13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
[13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
[13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[13:48:10.0360] [NAND] WMR_Start:174 FIL_Init [OK]
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
[13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
[13:48:10.0360] [NAND] WMR_Open:371 VFL_Open [OK]
[13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
[13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] AppleMultitouchN1SPI: successfully started
[13:48:10.0360] AppleH4CamIn::start - back camera expected
[13:48:10.0360] AppleH4CamIn::start - front camera expected
[13:48:10.0360] AppleH4CamIn::power_off_hardware
[13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
[13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
[13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
[13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
[13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] display-scale = 2
[13:48:10.0360] display-rotation = 0
[13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
[13:48:10.0360] found display: primary
[13:48:10.0360] display: 640 x 1136
[13:48:10.0360] found PTP interface
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioControl
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[13:48:10.0360] IOAccessoryPortUSB::start
[13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[13:48:10.0360] init_waste
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
[13:48:10.0360] [NAND] WMR_Open:420 FTL_Open [OK]
[13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
[13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
[13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
[13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
[13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
[13:48:10.0360] Started logging for intf
[13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
[13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
[13:48:10.0360] start:156
[13:48:10.0360] start:156
[13:48:10.0360] AppleARMBacklight::start: No AAP function
[13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
[13:48:10.0360] recv(13, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
[13:48:10.0360] recv(14, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
[13:48:10.0360] unrecognized key 'BootArgs' in value query
[13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
[13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
[13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] client protocol version 13
[13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
[13:48:10.0360] Restore options:
[13:48:10.0360] UUID => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
[13:48:10.0360] MinimumSystemPartition => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionSize => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionPadding => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
[13:48:10.0360] entries =>
[13:48:10.0360] 2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
[13:48:10.0360] 3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
[13:48:10.0360] 4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
[13:48:10.0360] 5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
[13:48:10.0360] 8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
[13:48:10.0360] }
[13:48:10.0360]
[13:48:10.0360] entering load_sep_os
[13:48:10.0360] device has no sep
[13:48:10.0360] entering partition_nand_device
[13:48:10.0360] device supports boot-from-NAND
[13:48:10.0360] nand device is already partitioned
[13:48:10.0360] entering wait_for_storage_device
[13:48:10.0360] Searching for NAND service
[13:48:10.0360] Found NAND service: IOFlashStoragePartition
[13:48:10.0360] NAND initialized. Waiting for devnode.
[13:48:10.0360] entering clear_remap_variable
[13:48:10.0360] executing /usr/sbin/nvram
[13:48:10.0360] entering format_effaceable_storage
[13:48:10.0360] effaceable storage is formatted, clearing it
[13:48:10.0360] effaceable storaged cleared
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Sochi11D257.N42OS
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] entering check_for_restore_log
[13:48:10.0360] found restore log (size = 28347)
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] error unmounting '/mnt2': Invalid argument
[13:48:10.0360] entering clean_NAND
[13:48:10.0360] NAND format complete
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
[13:48:10.0360] entering format_storage_for_LwVM
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] unexpected partition 'LwVM' - skipping
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[13:48:10.0360] entering create_filesystem_partitions
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] system partition padding size is: 167772160 bytes
[13:48:10.0360] unable to open : No such file or directory
[13:48:10.0360] creating 2 partitions
[13:48:10.0360] creating encrypted data partition
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] block size for /dev/disk0s1s2: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering mount_filesystems
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s2
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Data
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Data appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
[13:48:10.0360] entering resize_system_partition_to_options
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
[13:48:10.0360] Erasing system partition prior to resize operation.
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:0 requiredSize=465920
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized the system partition
[13:48:10.0360] entering maximize_data_partition
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
[13:48:10.0360] maximizing data partition to 13946060799 bytes
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=3404800
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized data partition to consume free blocks
[13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] entering ramrod_ticket_update
[13:48:10.0360] looking up root ticket hash
[13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[13:48:10.0360] received valid ticket (2741 bytes)
[13:48:10.0360] entering restore_images
[13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
[13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[13:48:10.0360] void AppleUSBDeviceMHello gamavranje,
Thanks for using Apple Support Communities.
The icons you're seeing on your iPhone indicate it is in recovery mode. Please plug your iPhone into your computer, and restore it with iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H. -
Want to sell my iPod Mini but i have lost the CD and need to burn one
Hi i want to sell my iPod Mini but i have lost the CD that it came with. Is there anyway that i can download what was on it and burn it onto a CD for the person who buys it? If that is possible i would appreciate if you could link me to what i would need to download for both the Windows and the Mac.
ThanksThat is correct, you do not need to give them any disk. They can download the iPod Updater (something they might not already have) and iTunes (might already have it), both more recent versions than came with the iPod, from iTunes.com.
-
I have lost the use of the 'forward' and 'back' button
On Win 7 I have lost the use of the forward and back button - both are greyed out - except on this page ??? when I leave this page the greyed out appears on all tabs or links in use. I am using Firefox 3.6.16. To get to this page I have 7 tabs open at present and all ( except this one - odd! ) are greyed out.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx).
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter) -
I have a software license certificate for the upgrade from CS5.5 to CS6, but I have lost the upgrade file due to a disk crash in my computer.
where can I get the upgrade file from ?
thanks,
OferDownloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have lost the icon for trusteer rapport, unable to find an answer on there website.
I have just updated to Firefox Version 6, I have lost the Trusteer rapport icon that sits on the tool bar, the same thing happened when I downloaded Version 5, I was hoping that my Information was still available in my messages box when I logged into Mozilla, but alas it has gone, I have looked at the website for Trusteer and I am unable to find anything.
Rapport Trusteer Technical Support - https://support.mozilla.com/en-US/questions/862201
We are glad to inform you that a version of Rapport which supports Firefox 6 has been released and is now available for download in the following link:
* http://download.trusteer.com/NkuiAcruiKc/RapportSetup.exe
If Rapport states that the version of Rapport you are trying to install is older than the version already installed, please follow these instructions:
* 1) Choose to Uninstall Rapport
* 2) When prompted, select "Delete all user settings". Please be assisted by the following image - http://consumers.trusteer.com/files/images/uninstall.jpg
* 3) Reinstall Rapport from the above link
Check and tell if its working. -
Hi , I own a hp pavilion dv6 6050se laptop bought in UAE during 2011, I have lost the recovery discs
Hi , I own a hp pavilion dv6 6050se laptop bought in UAE during 2011, I have lost the recovery discs.
How do i get a copy of recovery discs??Hi,
I don't see any link on your Product Page to order a replacement set of Recovery Discs, but it's always worth calling HP directly and see if you can order them this way.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are unable to order these discs from HP, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?
i have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?
This question was solved.
View Solution.Hi justine28,
Click on the link below to download the software and drivers for your printer.
HP Officejet J4580 All-in-One Printer Drivers - Select your operating system
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
I am trying to connect my lap top to my HP Photosmart C4580. I have lost the software disk .
I have a Toshiba Satellite pro and a HP printer Photosmart C4580 which i purchased together in Harvey Norman Belfast. on 19/07/09. I have never been able to use the Blue tooth facility. However i now cannot print e-mails from my Lap top to printer via the connection cable or wirelessly. I have lost the disc that i got with my printer can you help Please. Thank you.
Hello there! Welcome to the forums @ronnie123456
I understand you no longer have the installation disk for your Photosmart C4580, and that is okay!
Here is the link where you can download the printer driver and software:
HP Photosmart C4580 All-in-One Printer Drivers
Also, if you cannot print your email after installing the printer, try printing from another web browser and that might help!
If you need any further assistance, include your operating system, the web browser(s) you have tried and any other details that I might need to investigate the problem further for you!
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I have lost the mail icon,and have downloaded the fix from apple but the icon is still not visible and I can't find it on my pc, and I therefore cannot access or send any mail from my macbook pro.Any suggestions to get the icon and mail back onto my pc?
Many thanks for all your assistance. I have downloaded the link you gave, but I have also used the install disks for the pc, and although the icon now appears in the Application folder, it still gives me the error message "You have Mail version 4.2 (1078/1084). It can’t be used on Mac OS X Version 10.6.8 (Build 10K549). " and does not open the mail.
Having downloaded the link and also installed from the disks that came with my pc, and restarted the pc a few times, I still cannot open the mail.
Any ideas? -
I have purchased Aperture since version 1. I have lost the original disk
I have purchased all versions of Aperture since version 1. I have lost the original disk and since downloading an update that required the serial number, I cannot use the program.
What is the solution to this problem?Green,
I had the same problem. I had misplaced the serial number for 1.5 and I needed it to reinstall the Aperture 3 upgrade. In addition, I no longer had the disc image for Aperture 3.
Originally, I downloaded the trial of Aperture 3 as an upgrade and then paid for it. This was before it went to the Mac App Store. I had previously bought the hard copy of Aperture 1.5 and then the hard copy upgrade to 2.0.
This is a testament to buying direct from Apple. With a little proof that I indeed bought the product from them, they provided me with a working serial number. I bought Aperture 1.5 from the Apple Store, Soho in New York, and when the transaction was complete I got an email of the receipt. That receipt number is what entitled me to receive this support from Apple. They sent me a link to the disk image for Aperture 3.1, from which I installed Aperture on a fresh hard disk, and then they sent me a working serial number for 1.5, which allowed me to complete the installation. Afterward, I opened Software Update and updated to Aperture 3.2.3. Done!
<Link Edited by Host> -
I have lost the purchased downloaded files to install Photoshop Elements 10 and need to obtain the
5/13/2013
I have lost the purchased downloaded files to install Photoshop Elements 10 and need to obtain them again so I can reinstall the program and continue my use of it. How can I do this?
Thanks,
Gogators69You should be able to re-download the PSE10 downloadable-installer from your Adobe account, if you log in to that—I’ve only ever purchased DVDs so cannot give you click-by-click instructions. Here is what an Adobe-chat rep just told me:
“If you purchase the download version product you may re download the product from you Adobe account. If you purchase the DVD version and somehow you lost your DVD we can provide trial download link depends on the situation. we are able to provide you the download link if the download link is available on Adobe server.”
If you have an issue figuring out what to do, then you can start up your own chat session by clicking the Chat Now button on the bottom of this page:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html
They will probably want to know things about your purchase including your serial number so be ready with that if you do start a chat session. -
How can I get and installation key since I seem to have lost the CD paper envelope?
I need to re-install my Acrobat 9 Standard. I have lost the CD envelope and the installation key with it. Fortunately, I have my product serial number on my Adobe acount when I registered that product. How could I get an installation key?
Hi Marcil,
This Link (Find your serial number quickly ) seems relevant to your query, Please have a Look.
Moreover i would recommend you to check your account details here : https://www.adobe.com/account.html
Regards,
Rahul -
How do you do a reset if you have lost the system password?
I have lost the password for logging in the ipad. How can I reset it?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
Maybe you are looking for
-
Facing some problems in creating a custom tabs in CRMD_ORDER Transaction
Hi Friends, I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP. Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put
-
I have a form with a date field (using a simple type). When I enter a text string into this field and try to save, I get an invalid context value error message for that field - as expected. However, when I try to cancel the form, it does nothing un
-
When I type, the letters shift (they jump from desired position to another position, i.e.: sometimes, the word jumps to the addressees tab, or some place else like down below the task bar.
-
ALEWEB_DOWNLOAD occurs an error when displaying a pdf file
Hi, We are using EP 6.0 SP2 Patch 5 and ITS 6.20 SP23. We are trying to create the pdf form of a delivery over ITS with function ALEWEB_DOWNLOAD. ITS configured on an R3 system version 4.6C. When we use Acrobat Reader version 6.0 it seems to be ok. B
-
About using customized VO in OAFramework
<*REDACTED*> Hi, I customized VO in iProcurement to select additional columns but it seems the standard VO is used instead of the customized at some times. I confirmed this issue by HeapDump. When this issue occurs, the customized VO didn't exist in