I have lost the setup CD..........
I am using the wireless router with model no. WRT54G v.5, i have just updated the firmware and have reset my router........but afterwards, i found that i have lost my setup CD........what can i do??
Open your browser and type in http://192.168.1.1 in the address bar. Another window will open and ask you for a user/password. Leave the user blank and enter admin as a password then hit enter. That should get you back into your router so you can reconfigure it for your internet connection and network needs.
Richard Aichner (Ikester)
Similar Messages
-
I have lost the toolbar at the top of screwen how do i get it back
i have google as home page, but seemed to have lost the toolbar at top of my screen which has bookmarks and other info stored up there to make it easier for me to get to frequently used sites. Iam not real computer savvy so all this has been set up for me to make it easier to operrate on my behalf
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the hidden Menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing -
How do you do a reset if you have lost the system password?
I have lost the password for logging in the ipad. How can I reset it?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
How can i reset my ipad when i have lost the code
how can i reset my ipad when i have lost the 4 didgit/number pass code
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
and extracting .. found Error1 at the point Verify firmware . AGAIN AND
and this is the log ..
2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
[13:47:25.0555] Changing state from 'Idle' to 'Restoring'
[13:47:25.0555] device software does not support nonce generation
[13:47:25.0555] requested restore behavior: Erase
[13:47:25.0570] requested variant: Erase
[13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:27.0333] <DFU Device 0562C260>: production fused device
[13:47:27.0333] requested restore behavior: Erase
[13:47:27.0333] device software does not support nonce generation
[13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
[13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
[13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
[13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
[13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
[13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
[13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
[13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
[13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
[13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
[13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
[13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
[13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
[13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
[13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
[13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
[13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
[13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
[13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
[13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
[13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
[13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
[13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
[13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
[13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
[13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
[13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
[13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
[13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
[13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
[13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
[13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
[13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
[13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
[13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
[13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
[13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
[13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
[13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
[13:47:27.0942] WinDFU::UploadData: ZLP
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:30.0968] WinDFU::ResetDevice: resetting...
[13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
[13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
[13:47:31.0046] Finished DFU Restore Phase: Successful
[13:47:31.0218] DFU mode device disconnected
[13:47:31.0218] Device removed when in state Restoring, moving device to transition state
[13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
[13:47:31.0218] Creating timer to monitor transition
[13:47:32.0175] DFU mode device connected
[13:47:32.0175] Transitioning device returned, continuing restore.
[13:47:32.0175] Canceling timer
[13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
[13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
[13:47:32.0175] requested restore behavior: Erase
[13:47:32.0175] requested variant: Erase
[13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
[13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
[13:47:33.0532] requested restore behavior: Erase
[13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
[13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
[13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
[13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
[13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
[13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
[13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
[13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
[13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
[13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
[13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
[13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
[13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
[13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
[13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
[13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
[13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
[13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
[13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
[13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
[13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
[13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
[13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
[13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
[13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
[13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
[13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
[13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
[13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
[13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
[13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
[13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
[13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
[13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
[13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
[13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
[13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
[13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
[13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
[13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
[13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
[13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
[13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
[13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
[13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
[13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
[13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
[13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
[13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
[13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
[13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
[13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
[13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
[13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
[13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
[13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
[13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
[13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
[13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
[13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
[13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
[13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
[13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
[13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
[13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
[13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
[13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
[13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
[13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
[13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
[13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
[13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
[13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
[13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
[13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
[13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
[13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
[13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
[13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
[13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
[13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
[13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
[13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
[13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
[13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
[13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
[13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
[13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
[13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
[13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
[13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
[13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
[13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
[13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
[13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
[13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
[13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
[13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
[13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
[13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
[13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
[13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
[13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
[13:47:35.0732] WinDFU::UploadData: ZLP
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:38.0758] WinDFU::ResetDevice: resetting...
[13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
[13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
[13:47:38.0836] Finished DFU Restore Phase: Successful
[13:47:39.0039] DFU mode device disconnected
[13:47:39.0039] Device removed when in state Restoring, moving device to transition state
[13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
[13:47:39.0039] Creating timer to monitor transition
[13:47:41.0674] Recovery mode device connected
[13:47:41.0674] Transitioning device returned, continuing restore.
[13:47:41.0674] Canceling timer
[13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
[13:47:41.0684] requested restore behavior: Erase
[13:47:41.0684] requested variant: Erase
[13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:42.0528] iBoot build-version = iBoot-1940.10.58
[13:47:42.0528] iBoot build-style = RELEASE
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
[13:47:42.0543] AMDeviceIoControl: pipe stall
[13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
[13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
[13:47:42.0543] radio-error not set
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] interface has 1 endpoints, file pipe = 1
[13:47:42.0543]
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
[13:47:42.0606] unable to open device_map.txt: No such file or directory
[13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
[13:47:43.0994] unable to open device_map.txt: No such file or directory
[13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
[13:47:43.0994] AMDeviceIoControl: pipe stall
[13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
[13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
[13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
[13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
[13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
[13:47:46.0958] unable to open device_map.txt: No such file or directory
[13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
[13:47:46.0958] Finished Recovery Restore Phase: Successful
[13:47:48.0409] Recovery mode device disconnected
[13:47:48.0409] Device removed when in state Restoring, moving device to transition state
[13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
[13:47:48.0409] Creating timer to monitor transition
[13:47:52.0895] RestoreOS mode device connected
[13:47:52.0895] Transitioning device returned, continuing restore.
[13:47:52.0905] Canceling timer
[13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
[13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
[13:47:52.0905] requested restore behavior: Erase
[13:47:52.0905] requested variant: Erase
[13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:53.0792] requested restore behavior: Erase
[13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0792] device did not return saved USB log
[13:47:53.0792] device did not return saved panic log
[13:47:53.0792] previous restore failed with exit status 0x100
[13:47:53.0792] connected to service com.apple.mobile.restored
[13:47:53.0808] using protocol version 13
[13:47:53.0808] unable to open device_map.txt: No such file or directory
[13:47:53.0808] board config = n42ap
[13:47:53.0808] no value returned for BootArgs
[13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
[13:47:53.0824] no value returned for MarketingPartNumber
[13:47:53.0824] _copyDeviceProperty() failed for mpn
[13:47:53.0824] requested restore behavior: Erase
[13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
[13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
[13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
[13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
[13:48:10.0360] L2TP domain init
[13:48:10.0360] L2TP domain init complete
[13:48:10.0360] PPTP domain init
[13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
[13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
[13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
[13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[13:48:10.0360] [NAND] WMR_Start:174 FIL_Init [OK]
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
[13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
[13:48:10.0360] [NAND] WMR_Open:371 VFL_Open [OK]
[13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
[13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] AppleMultitouchN1SPI: successfully started
[13:48:10.0360] AppleH4CamIn::start - back camera expected
[13:48:10.0360] AppleH4CamIn::start - front camera expected
[13:48:10.0360] AppleH4CamIn::power_off_hardware
[13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
[13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
[13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
[13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
[13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] display-scale = 2
[13:48:10.0360] display-rotation = 0
[13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
[13:48:10.0360] found display: primary
[13:48:10.0360] display: 640 x 1136
[13:48:10.0360] found PTP interface
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioControl
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[13:48:10.0360] IOAccessoryPortUSB::start
[13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[13:48:10.0360] init_waste
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
[13:48:10.0360] [NAND] WMR_Open:420 FTL_Open [OK]
[13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
[13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
[13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
[13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
[13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
[13:48:10.0360] Started logging for intf
[13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
[13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
[13:48:10.0360] start:156
[13:48:10.0360] start:156
[13:48:10.0360] AppleARMBacklight::start: No AAP function
[13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
[13:48:10.0360] recv(13, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
[13:48:10.0360] recv(14, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
[13:48:10.0360] unrecognized key 'BootArgs' in value query
[13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
[13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
[13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] client protocol version 13
[13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
[13:48:10.0360] Restore options:
[13:48:10.0360] UUID => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
[13:48:10.0360] MinimumSystemPartition => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionSize => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionPadding => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
[13:48:10.0360] entries =>
[13:48:10.0360] 2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
[13:48:10.0360] 3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
[13:48:10.0360] 4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
[13:48:10.0360] 5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
[13:48:10.0360] 8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
[13:48:10.0360] }
[13:48:10.0360]
[13:48:10.0360] entering load_sep_os
[13:48:10.0360] device has no sep
[13:48:10.0360] entering partition_nand_device
[13:48:10.0360] device supports boot-from-NAND
[13:48:10.0360] nand device is already partitioned
[13:48:10.0360] entering wait_for_storage_device
[13:48:10.0360] Searching for NAND service
[13:48:10.0360] Found NAND service: IOFlashStoragePartition
[13:48:10.0360] NAND initialized. Waiting for devnode.
[13:48:10.0360] entering clear_remap_variable
[13:48:10.0360] executing /usr/sbin/nvram
[13:48:10.0360] entering format_effaceable_storage
[13:48:10.0360] effaceable storage is formatted, clearing it
[13:48:10.0360] effaceable storaged cleared
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Sochi11D257.N42OS
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] entering check_for_restore_log
[13:48:10.0360] found restore log (size = 28347)
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] error unmounting '/mnt2': Invalid argument
[13:48:10.0360] entering clean_NAND
[13:48:10.0360] NAND format complete
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
[13:48:10.0360] entering format_storage_for_LwVM
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] unexpected partition 'LwVM' - skipping
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[13:48:10.0360] entering create_filesystem_partitions
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] system partition padding size is: 167772160 bytes
[13:48:10.0360] unable to open : No such file or directory
[13:48:10.0360] creating 2 partitions
[13:48:10.0360] creating encrypted data partition
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] block size for /dev/disk0s1s2: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering mount_filesystems
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s2
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Data
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Data appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
[13:48:10.0360] entering resize_system_partition_to_options
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
[13:48:10.0360] Erasing system partition prior to resize operation.
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:0 requiredSize=465920
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized the system partition
[13:48:10.0360] entering maximize_data_partition
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
[13:48:10.0360] maximizing data partition to 13946060799 bytes
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=3404800
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized data partition to consume free blocks
[13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] entering ramrod_ticket_update
[13:48:10.0360] looking up root ticket hash
[13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[13:48:10.0360] received valid ticket (2741 bytes)
[13:48:10.0360] entering restore_images
[13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
[13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[13:48:10.0360] void AppleUSBDeviceMHello gamavranje,
Thanks for using Apple Support Communities.
The icons you're seeing on your iPhone indicate it is in recovery mode. Please plug your iPhone into your computer, and restore it with iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H. -
After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?
Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.
-
Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback... -
I have lost the computer library of tunes downloaded from CDs onto ITunes . So when I sync my Ipod ( with all CD and Itune downloads) with ITunes library (only ITune downloads) will I lose the CDs held on my Classic IPod. Thanks for your consideration.
Likely. Copy them from the iPod to your computer by:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
Want to sell my iPod Mini but i have lost the CD and need to burn one
Hi i want to sell my iPod Mini but i have lost the CD that it came with. Is there anyway that i can download what was on it and burn it onto a CD for the person who buys it? If that is possible i would appreciate if you could link me to what i would need to download for both the Windows and the Mac.
ThanksThat is correct, you do not need to give them any disk. They can download the iPod Updater (something they might not already have) and iTunes (might already have it), both more recent versions than came with the iPod, from iTunes.com.
-
Camera Roll is missing. I have lost the Camera Roll section in Photos. Any idea how I can restore Camera Roll . I am using an iPad 3 with OS 6.01 Thanks!
Hi,
Thanks for your help.
I have discovered that Camera Roll reappeared when I took a pic using my iPad camera.
Previously I had not done that. Stupid me.
Your attempt to help me is much appreciated.
Thanks.
C.H.2 -
Since updating to Firefox 4.0.1 I have lost the site security ranking provided by Norton. can I incorporate this in the latest Firefox? Failing that, how can I return to my previous version?
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788
-
I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4. We moved, and I have looked everywhere. Am I doomed to find a way to buy it? Can taking it into the Apple Store fix it? Will it be expensive THERE? I've already saved all of the files I want off of it.... I just need it to work now.
You've lost me on why you need to reinstall Tiger, when you already have all the files you wanted (which means Tiger worked perfectly fine). If you want to upgrade to Leopard, that's a different issue: your Mac needs to meet the minimum system requirements for that, which you can easily determine.
If you just want to get a replacement set of Tiger install discs, you can try calling AppleCare and see if they're able to send you a replacement set, and if not, you'll have to buy a new set yourself. You can get them on eBay, Craigslist, and HardCore Mac (http://store.yahoo.com/hardcoremac/), although they sell it for ridiculous prices.
< Edited by Host > -
Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.
Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427
Maybe you are looking for
-
Is there a way to send a group text message to more than 10 recepients?
Is it possible to send a group text message to more than 10 recipients? I called AT&T tech support and they said the phone's software limits group messages to no more than 10.
-
Unable to check logfiles in Application Server Control
I use oc4j_extended with a seperate oc4j_home: java -jar "%OC4J_INSTAL%\oc4j.jar" -userThreads -verbosity 10 -config %OC4J_HOME%\config\server.xml This means I had to change some paths in server.xml. Now I am able to use ascontrol from my seperate ho
-
I have removed and reinstalled Firefox (twice) and the problem continues. I don't know of anything I actually did to cause this problem. I have noticed several other people have the same thing happening, but no answers have been provided yet. I'm rea
-
My iPhone 3gs locked when I was updating to iOS 6.0.1.
My iPhone 3gs locked when I was updating to iOS 6.0.1. I begun updating by the iPhone itself, then it asked to connect to iTunes, but at the end - after tried to restore the firmware it does not restore (id error 29). I've just replaced the battery,
-
Dear friends, Can i present ALV output with Main Heading and within there r subheadings like the following ? Main Heading 01 Main Heading 02 Sub Head1 Sub Head2 sub Head3 sub Head4 s