I have lots of .MOV files on my iPhone5 that I need to transfer to my PC. Using QuickTime Player 7.7.4 I am unable to view them once they have been copied to a hard drive or directly from the iPhone via USB. 1% of the time a vid is viewable
I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB. 1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio. Yes its a Quick Time problem I know but where do I post this question in the community? Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.
Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.
Similar Messages
-
My movies are type MPEG-2
I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-2 (.mts)
What can I do ?1. Is your external HD connected by firewire?
2. mpeg2 is the final compressed delivery format of a DVD, not intended for editing, and iMovie cannot handle such files, so you need to convert them first:
For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20. -
Do thumbnails show in Bridge CS5 if connected directly from a DSLR (via USB cable)?
I have a D90 and none of my thumbnails for my files show in Bridge CS5 when connected directly from the camera. This includes ALL types of files (JPEG, NEF, etc). It shows the thumbnails when I use a card reader though. Is this common with DSLRs?
If you have—misguidedly and unfortunately—done that already, first back up the image files on your computer, then immediately format the card in the camera, which will erase everything in the card and format it to a fresh, pristine state.
What ever possessed you to do a thing like that?
Had you done that to the card containing the raw files you can't open?
Do not be fooled by what the camera shows you anyway. The preview you see in the back of the camera when chimping* is not a preview of your raw file at all, but of the embedded JPEG that the camera creates right after you shoot and records inside your raw file. The histogram it shows you in the camera is not based on the raw data at all either, but on said embedded JPEG.
The same is true when you review or playback the images later on the LCD display in the back of the camera.
*Chimping is a colloquial term used in digital photography to describe the habit of checking every photo on the camera display (LCD) immediately after capture.
The phrase is most likely derived from comparison between the sounds and actions some make while reviewing images and those of an excited primate (Oooh! Oooh! Aaah!), or when a photographer is completely absorbed in the act of analyzing, admiring or proudly displaying a shot to others.
From: http://en.wikipedia.org/wiki/Chimping
Oy! -
In a previous question, someone asked hoe to import RSS feeds from IE to FireFox:
http://support.mozilla.com/en-US/forum/1/358684?s=rss&as=q
I have done as it says, but had trouble with the second step which was "installing OPML Support 1.5.2 extension for Firefox, which you can use to import OPML file you just exported from IE". I think I installed the extension, but now what? how does it help me import the feeds? And where do i view RSS feeds in FireFox?PORT YOUR NUMBER OUT...T MOBILE WILL PAY YOUR ETF IF YOU GIVE THEM YOUR VERIZON PHONES.
-
How can i convert a quick time movie file to a cd that will play in a car stereo?
how can i convert a quick time movie file to a cd that will play in a car stereo?
In quicktime, I would try File -> Export -> Audio. It will create an audio file. Then drop it onto your playlist into iTunes. Burn the list from itunes with File -> Burn to disk and then select Audio CD.
If you have Quicktime 7 it should be easier and export to AIFF directly -
Is there any way to delete songs directly from my iPhone without using iTunes?
I'm trying to delete music directly from an iPhone 4 in iTunes on the device rather than using my laptop to delete and then sync it. Is there any way to delete music completely from my phone without using my latop?
I tried this, firstly de-clicked the title in iTunes and syned with my iPhone4 but the title is still there on the phone. so deleted the title from iTunes and re-syned but alas the title is still there.
any ideas? -
Decrypt and Copy DVDs to Hard Drive easily and fast
Summary:DVD43 can’t work well on your Windows 8/7/XP/Vista
((64-bit)? Today we’ll look at drop dead simple method to decrypt and
copy DVDs with the best DVD43 alternative, so you can easily copy DVD
movies to your hard drive.
Have you ever wanted to make backup copies of your DVDs? DVD43 is a
very popular free DVD decrypter to help you decrypt DVDs on the fly so
that your DVD copy program can read DVD discs. Although DVD43 plug-in
have been released to bring wide compatibility with Windows 64 bits,
most DVD copy programs don't yet support decrypter plug-ins. Plus, DVD43
can't deal with the new DVD copy protection for its relatively slow
update. Therefore, in order to backup DVD effortlessly, you’d better to
find a DVD43 alternative to copy DVD movies on Windows(Windows 8) included.
In my view, a good alternative to DVD43 should be able to backup DVD
with high quality and supports various DVD disc types to suite your
needs. Here Brorsoft DVD Ripper
is highly recommend to you. With it, you can decrypt, copy your
protected DVD in Windows within a few simple clicks. Besides removing
DVD copy protection, you can copy DVD movies to hard drive with original
DVD structure or just backup the main movie as you want. What’s more,
it also enables user to rip and convert DVD to a wide variety of video
formats like MP4, MOV, M4V, MP4, WMV, AVI, MPG, FLV, MKV, etc for
different use. If you're looking for DVD43 alternative for Mac, please turn to DVD Ripper for Mac.
[How-to] Rip/Copy DVDs with Best DVD43 Alternative:
Step 1. Load DVD info > Insert a source DVD in optical drive. Install and launch the excellent
alternative tool for DVD43.
Click disc button to load DVD movies. You can select subtitles and
audio track (English, French, German, Spanish…) for each chapter. Forced
subtitles can be attained, too.
Step 2. Copy/backup your DVDs
Option A - "Full Disc Copy" without anything loss
Click quick button "Copy the entire disc" to starts copying disney DVD disc to hard drive maintaining the original structures.
Option B - Directly Copy DVD main movie only
P.S. If you want to encode your DVD media to a playable,
editable format, just click the Format bar and choose your desired
format from the drop-down list. Various output formats like MP4, MOV,
MKV, FLV, WMV, AVI, etc. are provided. Moreover, kinds of presets for
portable devices and video editing software like iPhone, iPad, iPod,
iMovie, Final Cut Pro, Samsung, HTC, Motorola, etc. are provided to help
you get videos with optimized settings to best fit your devices or
software.
Step 3. Start to rip and backup DVD on Windows > Click
“Convert” button to start converting, copying DVD movies using the
alternative to DVD43. When the conversion complete, you can get the
converted videos and store, play, edit and share them anywhere you like.
Editors' note: With decent decrypting capability, high
quality video output and considerate backup solution and specific format
templates for versatile PMP devices (iPad, iPhone, Apple TV, Xbox, PS3,
Android tablets and phones, etc), Brorsoft DVD Ripper ranks top on the
DVD ripping application list. Meanwhile Brorsoft provides excellent
customer support service, including lifetime free upgrade of product and
technical support. Users can contact the support staff via email for
help and suggestion.
Source:Get the Best DVD43 Alternative to copy DVD movies
[quote] androidiosconvertertips.altervista.org/blog/alternative-for-dvd43-decrypt-and-copy-dvds-to-hard-drive-easily-and-fast/ [/quote]What you want to do is select the files you want to move then go File>Relocate Masters. Your images will then be referenced to a location you select. Aperture will still continue to manage the images, but the external hard drive must be connected if you want to make adjustments. Aperture will retain Metadata and any adjustment information. Your original images will stay unmodified on your external drive.
Jeff -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.
Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ???? -
Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?
First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal. -
Burn out .vobs but to hard drive, not directly to disc
Hello gentlemen,
I want to test some footage in DVD format, from Premiere, but when you ask Premiere to make a DVD, I have it set to open Encore, but there is no option to create the .vob files and just create them on my hard drive, it wants me to insert a disc to complete the process.
Is there any way of getting Premiere to create vob files directly to the hard drive directly, so I can burn them out later to disc ?
Thanks,
Dave.David,
There are four options to go from PPro to Encore:
- Export a DV AVI and import in Encore.
- Export a DVD compliant MPEG-2 file and import in Encore.
- Select "Export to Encore" in PPro (CS3 only).
- Or "frameserve" from PPro to Encore: http://www.adobeforums.com/webx/.3c05fbd9
Which option to choose is a matter of personal preference / workflow that suits you best. -
I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!
So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing! -
I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?
Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion. -
Is this a copy of my hard drive? Can I trash it?
Hello Helpful Apple People,
I recently hit too many of the wrong keys at the same time and I ended up with this icon on my desktop:
I'm not sure what it is, but I believe it's a copy of my hard drive? (My original hard drive is still on the desktop.) I'd like more than anything to throw it in the trash, but I want to make sure that before I do, that won't ruin anything. Thanks.Thanks, Niel.
Can you explain what an alias is and why someone would want one? Why is it useful?
Jim -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
Maybe you are looking for
-
Development environment set up
Hi, I just want to set up a development environment for ISA and was going through the Dev and Extension Guide. I have the following questions that I need help with: a) What version of Developer workplace is required? Can I use the latest or have to
-
Dear Guru's Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values Regards Chandra Sekhar Reddy.P
-
Hi, I'm having a problem aligning the table of contents I created. The page numbers don't seem to be right aligning. The only page numbers that seem to do that are the 1's. All the other numbers, 3's, 4's, etc all seem to right align except for the
-
Ipod Mini - music disappeared, does nothing
I bought an ipod mini fall of 2004, right away it had issues...in the first month it, I turned it on one day and all of my music was gone. I sent it back to Apple thinking it was the battery...they found nothing. then of course it was fine through th
-
Regarding an error when an idoc is transferred through ALE
hi guys, i have designed a custom message type and sent an idoc from server 1 to server 2 ( receiver system ) <b>using ALE</b>, idoc is transferred fine but data in idoc is not sent to receiver system i mean, there is no data in idoc. i received an e