I have Mac OS X v.10.6.8 but I need v.10.6.7 to install an update. What do I do?
I need to update Mac App Store. I can't install it. It requires OS X v.10.6.7 but I have 10.6.8.
What can I do?
Hey Judy,
Welcome to Apple Support Communities.
It sounds like you’re concerned about installing a OS X update or an application update, and you want to make sure your iMac can access the Mac App Store.
The article linked below will walk you through launching the Mac App Store and updating any software that was downloaded with it.
Mac Basics: Mac App Store is the built in way to purchase and update software - Apple Support
This article will walk you through he process of updating OS X on your Mac with Software Update.
Mac OS X 10.6: Updating your software
Cheers,
-Jason
Similar Messages
-
Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
hi there i have Mac OS X 10.5.8 on a MAcbook i want to upgrade as some programmes are slow what do i upgrade to?
same here, annieeee. bought a Late 08 running Leopard...i ordered Snow Leopard from Apple store for $20, and installed last night. now it updates apps like iTunes and runs my Office 365
-
I have a macbook pro with 10.6.8 on it but I need to do a clean re install and my CD is 10.4.6. Can I use the CD and then are my OS updates to 10.6.8 free?
Also can I use iMac OS install disks on a MacBookPro?You will have to buy Snow Leopard:
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order. You also should find it at your local Apple retailers.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements. -
Hi all, I'm trying to download a film from iTunes onto my iPad but downloaded the HD version instead of SD and don't have the room to download it. Have removed everything I can to make space but still need another 1.2 GB. Is there any way I can delete it so I can delete the version I wanted, or even better change to the SD version? The film is still queuing in the downloads list. I've tried edit and delete but that doesn't work. I also can't re-download the film from iTunes.
Any suggestions very welcome!Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.
-
I have turned Home Sharing on for two computers, but the "Shared" area is not appearing on either computer. What does this mean? What do I do? I am trying to get music from one library into another library to sync with my ipod so that I can have all songs on the ipod from both libraries.
Thank you for your help!If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar.
If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
Hope that helps. Good luck. -
I have a licence for CS design stand 4, but I need to reinstall, can you help?
I have a licence for CS design stand 4, but I need to reinstall, can you help?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
I have Mac book 15. MAC OS X Version 10.5.8 is installed with Windows XP dual boot function.
My screen display got hazy and blurred, sometimes it is ok, but only in win xp.
I have tried it with external LCD, its worked fine, but second screen is stretching display, but showing me the same screen in MAC.
But in win XP display comes exactly on MAC book, means sometime hazy , sometimes ok.
Kindly help me???Most of us wouldn't know that here. Call your Apple Store.
-
Where do I purchase these applications for my iMac?
Did you purchase this computer or did you just do a re-install or update to Snow Leopard?
Did you own Office? What version of Microsoft Office did you have installed. You can still run Office 2004 on Snow Leopard but Office 2004 will not work under Lion and higher. Once I know what version you are interested in, I can offer best options for you. Do you want email in Office or are you planning on using Apple Mail?
iPhoto:
Option 1) Do you have the original computer's install disks? If yes you can install iLife that includes iPhoto. Once you have installed iLife I would suggest running the Software Update utility until no more updates are available (do this before actually using the software).
Option 2) Open Mac App Store.
Hold Option key and click on “Purchases”.
Option-click on “IPhoto” from the purchased app list.
“Installed’ should now say “Install” allowing you to re-download iPhoto, or try Option-click again on the “Install” button to start re-downloading iPhoto.
Note:
Please note however, that the current version of iPhoto 11 (version 9.4.3) available at through the App Store must run on OS 10.7.5 or later. Earlier versions of iPhoto 11 (version 9.2.1 or earlier) could run on Snow Leopard OS 10.6.8.
You may want to call Apple's Customer Care and see if you can still get a version of iPhoto 11 that will run with Snow Leopard.
1-800-676-2775 -
My Mac book air opens to m the password but won't go any further, it stop right there! what should i do? I am sure i have the right password
Here's an old fix for the problem. Don't know it applies now:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If it isn't applicable in your version of OS X, then I suggest:
Be sure you backup your files to an external drive or second internal drive because the following
procedure will remove everything from the hard drive.
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?http://support.apple.com/kb/TS1583
-
i have my iphone 5 plugged into my laptop but it wont connect with itunes, what do i need to do?
Have you tried reinstalling iTunes?
If this doesn't work maybe you have a faulty USB cable or drivers problems. -
How will have an option to create an icloud id
Hello there, vishal274.
The following Knowledge Base article provides a great FAQ that provides some great answers to some of the more common questions about iCloud, including yours:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
How do I sign up for iCloud?
You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
You may need to verify the email address that you use for your Apple ID. See Frequently Asked Questions About Apple ID for more information.
I had a free Find My iPhone account. How do I sign up for iCloud?
Update the devices that you use with Find My iPhone to iOS 5 (iOS 6 recommended). When you're asked to enter an Apple ID during setup, enter the Apple ID you were using for Free Find My iPhone. Your account will be automatically updated to iCloud.
I had a MobileMe account. How do I sign up for iCloud?
To use your MobileMe account for iCloud, follow the iCloud setup instructions and enter your @me.com or @mac.com email address as your Apple ID. If you had an @me.com address, it will be reactivated for email when you sign up for iCloud. If you had an @mac.com address, it won't be reactivated for email, but you can set up a new @icloud.com email address to use with iCloud.
Important: You will need a verified email address associated with your @me.com or @mac.com Apple ID to set up iCloud. To add a verified email address, go to My Apple ID (appleid.apple.com), sign in with your @me.com or @mac.com email address, and add a valid email address to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Currently have Mac OS X 10.5.8. But my disc drive won't read 10.6.3 Snow Leopard dvd.
I just wiped my Mac OS X 10.5.8. Reinstalled everything with the original Mac OS X software discs I got with the computer in 2008. No probems and disc drive worked just fine. Updated until I reached 10.5.8. Now I am trying to update to Mac OS X Snow Leopard. (I had it installed on this computer before and I had to order the dvd.) Now I am trying to install it for the second time on the same system. It spins for about 20 seconds once injected, until it ejects the disc. No pop ups or visual recognition of the disc shows up on the screen. Am I missing a part fo the 10.5.8 upgrade? Was the disc a one time only download? Does anyone have any suggestions or solutions?
I am not sure why they sent you a grey DVD.
I would attempt a clean install by using the correct Snow Leopard DVD to erase your hard disk before installing and then not importing anything during the install process.
Contact the Apple office where you bought your DVD if it does not work.
This issue should be on the Snow Leopard forum and not here.
Maybe you are looking for
-
Help a newbie - startup disk full error!
What? I have NO idea what to do about this. help...
-
Reference to C# objects in TestStand - how to save and retreive them
I am new to LabView and TestStand. I want to use 2 .NET objects in those applications In Labiew, I successfully created the objects, manipulate the functions through VIs and closed the references. While I could use the VIs for TestStand, I would rath
-
What is the best algorithm to score a typing test? A user types from a sample. You compare the two samples and determine how accurate the sample is. A missed word, an extra word or a misspelled word are wrong. Having more than 2 spaces between words
-
Hi, I'm using functions HREIC_GET_LOGGED_INFTY_CHANGES and HR_INFOTYPE_LOG_GET_DETAIL To get employee changes. Does anyone know if these functions return the operation (Insert change or delete)? If yes where? Thanks,
-
What is the best way to place image (with caption) in a Book?
I am preparing a template for an Encyclopedia project, The Encyclopedia will be in more than 10000 pages, so what is the best way to place images (Photos, Graphs, illustration ...etc) with a caption? The problem that when I modify text; the image don