I have Mac OSX 10.5.8. Processor is 1.8 GHz Power PC G5. I have seen other people talk about processor in OSX 10.5.8 as Intel. How can this be?
I have a Mac OSX (10.5.8). The processor is 1.8 GHz Power PC G5. I have seen other people refer t the processor in thier Mac 10.5.8 as Intel. How can this be?
Welcome to Apple Support Communities
Mac OS X 10.4 and 10.5 support Macs with Intel and PowerPC processors, so it's normal that some Mac OS X 10.5.8 users have got an Intel Mac and others have got a PowerPC one. Mac OS X 10.6 and later only support Intel computers
Similar Messages
-
I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?
Identify and remove adware/malware
http://www.thesafemac.com/arg/ -
Fonts that should be showing up as Helvetica are showing up as Wubble. In my preferences/content I have my Proportional: Serif; Serif: Times; Sans-Serif: Helvetica; and Monospace: Courier. Everything was fine until I upgraded to 6.
You can do a check for corrupted fonts and other font issues:
* http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
* http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html -
I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?
Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed, so it does not default to interabnl speaker
Is there a way to force the system to change to DVI output?????
thanks a lotHi there,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W. -
When I try to download this I get a message that says I haven't got sufficient space on my startup disk. I have checked my available space on the disc and I have only 3GB free out of 500. I have hardly anything on my mac - how can this be?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.
Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664 -
Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?
I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera -
i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!
I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus -
I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?
I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7) -
My friend dislikes the updated itunes 11.0.1 and wants the previous version put back in. On a Macbook 2,1 with OSX 10. 6.8 how can this be done?
You need a Time Machine backup to restore an old version. If you don't have one, you'll lose your library because it can only be used with iTunes 11
-
Quicktime 10.0 will not play apple trailers from site. I have Mac OS X 10.6.8 - site directs me to download - then states I have it already - all software updated. What do I do?
JessBennet wrote:
... I already clicked on the Apple symbol on the top left part of my screen and clicked "Software Update'' but it says I am up to date, which clearly is not right)
It is Correct for your Current OS = Leopard = 10.5.8
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download...
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
When I close out Firefox, and return later to use the internet, I click on Firefox and it gives me a message stating that Firefox is already running and needs to be closed before restarting or reboot my system. This occurs every time Firefox is closed and attempt to re-start it,,, not only at times,,,, EVERY time.
I have tried removing Firefox from my system and re-installing to fix this issue however,,, this did not work. After re-installing, I still get the same message when attempting to restart Firefox.
I have also tried Ctrl, Alt, delete to open the task manager and find there is no task to close.
I do not have any problems when using IE, I prefer to use Firefox as it is faster and crashes less than IE.
I am very frustrated at having to reboot my system each time I want to use the internet.
How can this problem be repaired?There are various causes for this error, see [[Firefox is already running but is not responding]] for details.
-
My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?
Post the first 50 lines only of the crash report
Regards
TD
Maybe you are looking for
-
Hiding a intermediate node in a Jtree without hiding leaf nodes
Hi who can help me out of this problem. What my prob is dat i m interrested in hiding few intermediate nodes in JTree without hiding their children. Thanks Rakesh
-
Multiple libraries with independent settings?
I don't see that this can be done, but is it possible to have two libraries where on manages the content and the other does not? I want mymusic to be automatically added to the library via the iTunes process of doing so (not interested in doing it m
-
Updating and installing apps won't install after update to R29
Hi all, You can't update an existing app in Adobe DPS App Builder and install it. You need to create a new app each time. This is to time consuming. Anyone else noticed this? regards Mario
-
Can't install PS 6 X64 and X32 with the same license.
I have been running PS6 x32 on my Windows desktop. Now I have added a Windows 8 laptop. When I try to install PS6 x64 on my new laptop under the same license, I get this error message: "Serial Number you provided is valid, but a qualifying product
-
Cannot select column or rows in a table
I've created two column document - but for some reason cannot select the columns so that I can format them. The selection menu items are grayed out. And when hovering with curser the curser does not convert to arrow to enable 'select'. I just want to