I have Mac pro from 2010 and am hesitant to download Lion OX and icloud, any thoughts?
I am interested in downloading Lion and icloud but have read some horror stories, whats the story out there? How difficult is it?
If you go only by what's on this site, you'd be crazy to use any Apple product.
Migrating to Lion can be either effortless or nightmarishly difficult, depending on how well you prepare. The preparation consists of checking your third-party software for compatibility.
Almost all self-contained applications should be fine, unless they are PowerPC-only, in which case they will never work under Lion. You can determine which of your applications are PPC-only by looking under Software in System Profiler. Do this before you migrate, so you won't join the ranks of those bleating for help in these forums with a downgrade to SL.
System modifications, by which I mean any software that does not install merely by drag-and-drop into the Applications folder or download from the Mac App Store, are much more problematic. You should assume that system modifications will not work under Lion unless the developer says otherwise. Some will, some won't.
It's a very good idea to clone your system to another storage device, install Lion onto that, and test thoroughly. That way, if you don't like Lion, all you have to do is reboot. If you don't go that route, then obviously you must back up your data right before installing Lion so that you can revert immediately.
Similar Messages
-
I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148 -
Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS -
I have Mac Pro with Keynote and other essentials installed. How can I download the same on my IPAD without paying to download.
Try downloading them onto the iPad normally. If you're asked to pay for them, you can't.
The developer needs to create the two versions separately.
(116544) -
I have a MacBook Pro from 2010. How do I get iMessage to work on it?
I have a MacBook Pro from 2010 and was wondering if it's possible to get FaceTime and/or iMessage on the laptop. Does anyone know if this is possible, and if so, please let me know how! Thanks!
Why yes, yes it is! I see that you are running 10.6.8, so the best soultion would be to upgrade to Mavericks. If I am not mistaken, it is at no cost to you. Just go to the Mac App Store & find the Mavericks upgrade. It should be one of the more popular options on the featured page.
Good luck! -
Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
David Rosenblatt
<Email Edited By Host>Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0 -
I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtubeNo, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key. -
I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it. -
I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.
Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664 -
I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg WilliamsBoilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB -
I have a Mac Pro (Mid 2010) I just purchased Apollo Twin and discovered I do not have a Thunderbolt port, how can I get around this?
To use ANY ThunderBolt devices, a Mac must have left the factory with a ThunderBolt port. There are no known workarounds.
Intel holds the patents and controls the chips, and they have shown NO INTEREST in any other solutions. -
Accessing MBP and Mac Pro from iPhone (back to my mac? VPN?)
i am running Mountain Lion on the Mac Pro and Mavericks on the MBP and i am wondering if i have options for accessing these computers from my iPhone 5.
is this Back to My Mac and if so should i be able to access both computers from the iPhone while running this and what should i search for for setup instructions? or is this a utility only for getting back to my MBP running Mavericks from the iPhone or for getting back to my Mac Pro from my MBP? i am a bit confused about all of this.
also, does VPN get me something that Back to My Mac does not?
TIA for any helpBack to My Mac is for connecting from one Mac from another Mac with your iCloud account. iOS is not a Mac, so that isn't a supported feature – tell Apple you want it – http://apple.com/feedback/
A VPN is not the same as Back to My Mac. A VPN is a way to 'securley connect into a network from the outside' so that you can access your home network whilst away etc. VPN's can be created on computers or some routers. A VPN on a network can potentially allow you access to everything on that local network.
You should probably read up on what each of them is…
http://en.wikipedia.org/wiki/Back_to_my_mac
http://en.wikipedia.org/wiki/Vpn
You will need to explain what exactly you want to access - e.g. the files on the Mac, or use the UI to control the Mac (as if you were in front of it).
Apps like Screens can allow you some access to the Mac via iOS http://edovia.com/screens
You may find is much simpler to store required files in Dropbox & access them on iOS, it really depends on what you hope to access.
VPN's can be setup with Mac OS X Server, but that is probably not something to run unless you really need it (and have time to learn how to set up correclty - it will require you open up ports on your router which is a real security risk). -
i have a macbook pro from 2009 and the software is 10.5.8 how do i update it so i can have more interaction with the applications
Note some programs may not work with Lion or later
Upgrading to 10.7 and above, don't forget Rosetta! -
I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already
It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
And as BGreg say, call Apple support is also a good way to begin with. -
I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?
Is a version of Mac OS running on this Mac? Reboot and hold down the option key.
Maybe you are looking for
-
Can't add a new column to LCD table? Option there, just wont add it.
I have a LCD form with a table in it. Im trying to simply add a new column to the table. The option is there but the column just wont appear after clicking add Column to Left. I selected a column, right clicked the space > Insert > Column to left. Bu
-
Can I Use These Software Titles If I Buy A Mac?
Hello everyone, I recently enrolled at Phoneix University online classes are starting this month on the 20th. They faxed me a "Hardware/Software" standards checklist with the following specs & software titles that I would need to complete my courses,
-
Can you use a AIR-PWRINJ-FIB with a AIR-CAP3502I-A-K9 access point?
Is it possible to use a AIR-PWRINJ-FIB with an AIR-CAP3502I-A-K9 access point?
-
TS1702 how do you restore safari and app world to my ipod
how do you restore safari and app store to my I pod please
-
ITunes 6.0.4 won't play one particular song
I downloaded a song from iTunes and it play when I launch it from the Source "Purchased", but when I try to launch it from the Source "Library", the same song won't play. So far, it only affects one particular song. Any suggestions? Thanks