I have Macbook Air. One day i am using email-Entrouage, sudden it stuck up. I stopped it and start entourage again but it start verify and and rebuild but not rebuilt. email are 41.5 GB and free 5 GB, plesae guide how to resovle.
i have Macbook Air. One day i am using email-Entrouage, sudden it stuck up. I stopped it and start entourage again but it start verify and and rebuild but not rebuilt. email are 41.5 GB and free 5 GB. When problem not resolved i also copied that email db file in other Mac book with 200 GB free space but same process first verify then rebuild then message it cannot rebuild. Please guide.
I've been rebuilding Entourage Identities for years for clients. Most fail because they do not have enough free space. See this article
http://www.officeformachelp.com/2007/09/rebuilding_a_damaged_database_that_excee ded_size_limit/
(Fair disclosure: OfficeforMacHelp is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)
Similar Messages
-
Mail is missing in my Macbook Air (5 days only)
Hi all,
So during the Thanksigiving break I didn't use my Macbook Air (version10.8.2). However, I continued to receive and view mail from both my gmail and yahoo accounts on both my iPad and iPhone. And, you guessed it, when I fired up my MacBook Air on Nov. 26th I was missing mail from the last 5 days, even though I clearly received mail.
1) How do I push/pull those missing 5 days into the Macbook Air?
and
2) How do I avoid this problem in the future?
Many thanks for any help!I found the answer from someone in the Apple Community Forums:
Here's the response back and forth:
Csound1
Re: mail is missing in my Macbook Air (5 days only)Dec 4, 2012 12:33 PM (in response to kenneth@california)
Remove both of the accounts from Mail and re-enter them, you must choose Imap as the collection method, not POP
Like (0)
Reply
Level 1 (0 points)
kenneth@california california
This solved my questionRe: mail is missing in my Macbook Air (5 days only)Dec 4, 2012 1:11 PM (in response to Csound1)
Sounds scary. When I remove both accounts do I lose all of my downloaded email from years past? Ideally, it would stay in the computer and then when I re-enter them it uploads the missing dates. Am I dreaming?
Like (0)
Reply
Level 6 (13,535 points)
Csound1
This helped meRe: mail is missing in my Macbook Air (5 days only)Dec 4, 2012 1:16 PM (in response to kenneth@california)
So you don't bother to backup I assume? Are these Imap or POP accountsIf Imap did you create any local folders for storageIf POP everything is local so you MUST backup first. (Unless you have a current backup available) Then you won't lose any of your mail. FYI, Gmail is probably setup on your machine as Imap, Yahoo could be anything. -
hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
HT1338 i have macbook air 13.3 1.6 ghz intel core 2 duo and 10.5.8. how can i update 10.6
i have macbook air 13.3 1.6 ghz intel core 2 duo and 10.5.8. how can i update 10.6 pls help me
ok but i have mac os x.
I'll explain the numbering system for you.
With the operating systems numbering format it works as this: for example with 10.5.8, the first number is redundant because they are all 10 since 2001. This is the X in OS X
The second number is the upgrade version, which have cat names attached to them. 10.5 is Leopard. Each of these upgrade names must be purchased. If you want 10.6 (Snow Leopard) you need to buy it,
The last number is the update version, which is free, but requires the upgrade before you can install it.
So, you currently have Mac OS X 10.5.8 and you ask how to upgrade to Mac OS X 10.6 Snow Leopard, and I have given you the link of how buy it.
so do i must change mac os x (10.5) to snow-leopard.
The choice is yours. You do not have to upgrade if you do not wish to. -
Hi there, I have MacBook Air (Mid 2012) with OSX 10.8.2. I want to update to latest OSX but it is saying that I need to first install MBA Flash Firmware Update 1.1. When I try to install this firmware, I am told I should have OSX 10.8.3, Each one asking other to update first, can some one help me in this regard ?
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
What now?
Macbook Air.
Was working fine for the past year until now.See more like this on the right.. this is the most common error reported here since mountain lion came out..
Or read C12.. http://pondini.org/TM/Troubleshooting.html
Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap. -
I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now.
should i reset SMC... would it help?I'm doubtful it's a missing driver too, but I feel as though it's driver related. The first time XP was installed, after first boot without installing drivers, it was without sound etc, but fundamentally the system worked. Now after first boot, it's very buggy. Thanks for your suggestion Tonny. I ran the tool but it turns out the HDD is fine. Besides, everything runs fine in safe mode.
Does anyone know if (generally speaking) there is any firmware on the graphics card that would get updated via a Windows update? i.e. is it possible that Windows update downloaded a driver for the graphics card that installed new firmware that wasn't all that compatable with XP? -
I have macbook air and the first buttons from ,esc to power, make different orders what can i do ?
i have macbook air and the first buttons from ,esc to power, make different orders what can i do ?
Welcome to Apple Discussions
The behavior of those buttons (and other key shortcuts) can be set/changed in System Preferences->Keyboard:Keyboard Shortcuts button.
If you are missing the power button shutdown option from Mavericks OS 10.9x the workaround is control-power button or hold the power button down longer that poking (sleep) but not as long as force shutdown (crash). -
I have MacBook Air late 2011 with encryption enabled the mac froze and I pressed the power button to shut it down but then the gray screen appeared no wheels nothing just gray. I tried all steps but nothing helped. Worse than that only the pram key combination works I cant get the cmd-r or just alt or any combination to work??? Any suggestions would help. Thanks!
P.s. I am on mountain lion with ssd encryption enabled. The mac froze when the internet stopped the one from the cable (I use ethernet usb one) when I turned wifi on it froze. I have disconnected everything when trying the steps except power cable.Boot into Internet Recovery (command-option-R at the startup chime) and try to repair the boot volume in Disk Utility. You will have to unlock the volume before you can do anything with it.
-
It is possible to add 64gb to make it 128, i have macbook air 64gb only
it is possible to add 64gb to make it 128, i have macbook air 64gb only
No, you can only replace the SSD with a larger one and you'll need to use a 3rd party vendor (see OWC) because Apple doesn't sell SSD upgrades.
-
hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out
olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao. -
I have MacBook Air MD232 2012. I am working for a company that needs me to install all OS X from 10.7 to 10.10. How can I do this on my MBA? Thank you for your kind help.
Choose Utilities from the Finder’s Go menu, open the Disk Utility, create two or three additional partitions(see below), and install or clone a different Mac OS X version to each.
Unless you previously downloaded Mavericks 10.9, it’s no longer available.
(120302) -
Have Macbook Air, I purchased DVD external. Will not function, will not eject disc. On screen " no support disc." What am I missing?
Hi drhdrh,
I apologize, I'm a bit unclear on the exact nature of your configuration. If you are using an external SuperDrive with your MacBook Air, you may find the information and troubleshooting steps outlined in the following article helpful:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Regards,
- Brenden -
Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time
Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
I just recently downloaded the free trial of LIghtroom 5. One day i was using it and it was on my desktop and the next day it was gone, almost like it crashed and will not let me re-install. Please help
Scrappy1 what do you mean exactly by doing a scan?
Under Windows 7 you will want to use the Programs and Features Control Panel to remove your installation. I would recommend verifying that Photoshop Lightroom is removed from the list of installed applications.
Maybe you are looking for
-
When I downloaded the Firefox 4 installer and tried to install the software, an error message appeared that the application was not a valid win32 application. have deleted the file, re-downloaded it but with same effect. Therefore I cannot install Fi
-
File Upload via CSOM is incrementing Version number by 2.
Any ideas why a file upload via CSOM is incrementing the version number by 2 instead of one? I am using the following code to perform the upload List library = clientContext.Web.Lists.GetByTitle(DOCUMENTS_LIST_NAME); Folder folder = library.RootFolde
-
Integration between Lightroom and Photoshop broken
It will almost inevitably turn out that I'm missing something glaringly obvious, but since upgrading to Lightroom 5.5 and Photoshop CC 2014, my photos are losing their LR adjustments when sent to PS. I'm no longer asked how I want the RAW files rende
-
Problems in Arabic and ResourceBundle
i have a problem with arabic text using the resource bundle property file. I using struts framework and in the jsp i use <bean:meassage key="TheKey"> like: <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%> <%@ taglib uri="/WEB-INF/struts-bean
-
when I use JList in project, but it do not support the mouse selecting, user must press the 'shift' button or 'control' button and press the mouse left button, only through this way, we can select more than one items. can we only drag mouse to select