I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]
I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]
My friend has exact same Mac and CC and he has the same problem. We both have up to date Yosemite and CC versions.
Any ideas?
Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh
Similar Messages
-
Macbook Pro and Monitor help - Now won't work??
Ok so I have been using my i7 Macbook Pro 15" with a Dell Monitor fine.. but then started to get the odd flickers.. I was told this was a Mac issue and many many people had this..
Now when I plug in, my Monitor defaults to the orange standby light and it won't come on at all when connected to the Mac??!
I am using DVI with an Apple Thunderbolt adaptor so i can use the Thunderbolt connection on this newer MBP.
I took the monitor off the Mac and connected via DVI to a PC Laptop and the Monitor sprang into life and works great!!!
So I know its not the Monitor
Any solution to making this work again on the Mac????Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh -
I have MacBook Pro and updated to OS Maverick. Now it says my iPhoto is not supported. Any suggestions?
It should be made clearer that the iLife components are different for Mavericks:iLife: System requirements
-
Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly! -
I download songs from my dropbox to my macbook pro and then upload them to my updated iTunes. iTunes plays them in entirety, but when i update my iTunes match, my iPhone and iPad skip many of the songs and albums. Why? I have tried everything.
If you have manually manage set, you do not sync.
If you want to sync, select the content desired to sync and sync.
This is all covered in the User's Guide. -
Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference
Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html -
I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser
There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.
I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue. -
I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.
you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck. -
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?
I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend. -
i just got a new macbook pro and did migration from my old computer. transferred everything except my iPhoto! now it prompts me to choose a library, but its all blank? help!
Copy the Library over manually.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
I purchased the One to One when I bought my MacBook Pro, and I sent it in to Apple in order for the pictures and iTunes to be transfered. When I got it home no pictures or iTunes files were on it. What do I do?
Welcome to Apple Support Communities
If you already set up your Mac when you sent it, you should know that Migration Assistant creates a new user with the migrated data. Go to > Log Out, and log in the new user -
Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!
If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene
Maybe you are looking for
-
OMF export failed due to internal error
I get this error message whatever I do when I try to export as OMF: "OMF export failed due to internal error" I tried OMF 1 and 2. I tried to uncheck "include audio". I tried an extremely small project (one region, one track). Always the same error.
-
Error installing pc suite/nokia cable drivers/noki...
hi..i'm using windows xp service pack 2,my phone is a nokia 5700MX on firmware version:3.83.1 i had the nokia pc suite version 6.82 installed on my pc but accidentally deleted some nokia pc suite files(common files),so i decided to uninstall and rein
-
How to get all folders with Name and ID in Shared Document.
I tried this snippet and it is returning only Name not ID of the folders, Any help where am i going wrong? $.ajax({ url: "/<sitename>/_api/web/GetFolderByServerRelativeUrl('Shared Document')/folders?$select=Name,ID", method: "GET", head
-
HT1451 How do I put my music onto a new device?
Recently got and iPod touch gen2. Can't figure out how to get already purchased music into the music folder.
-
Usb stick wird ausgeworfen ohne grund (habe 10 verschiedene Modelle ausprobiert ) das schlimme, sie werden einfach entfernt und nicht korekt vom system ausgeworfen. manchmal wärend dem kopieren! kann jemand helfen?