I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the
i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help please
Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!
Similar Messages
-
I have a motorola H17 bluetooth it is paired to iphone 4s. The icon shows that it is connected. When making a call i tap the speaker icon and the bluetooth icon is not there. The motorola H17 tells me i am connected and the battery life when turned on. Any advice? Thank you in advance
here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock. -
I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe
I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
Please help!?Disabling Protected Mode should fix the problem. But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry. If you tell me your installed Reader version, I can give you a registry script to do that.
-
Should i keep the battery on when it is connected to the AC
hello
i have a question:
my macbook is always vonnected to the ac,, i don't move it around"seldom"
so i'm owndering,,will this affect my battery,,
should i keep the battery on when it is connected to the AC?
or should i remove it?
thanks in advanceHi multiple 1,
Modern battery technology now prevent battery becoming overcharged or create memory effect, so like First Magus said, it is ok to leave the battery in your macbook all the time.
But apple also recommend user to use their battery once a while or calibrate to refresh the battery cell.
Good Luck. -
I bought a new ipad2 yesterday and charged the battery and then expected to get going with it but the screen only displays an image of a ubs connection with an arrow pointing to a itunes symbol. I downloaded itunes on a PC and plugged in the ipad to it but nothing changed on the PC or ipad. very frustrating. anyone else experience this or have know how or ideas to help me?
Here is my standard reply, some of which may have no relevance to your situation. Start with trying different USB ports, even a numbe of times.
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://support.apple.com/kb/HT1808 -
Ok i have an iPod touch 4th generation. When i go to download an app from the app store it tells me i need the iOs 5 update. Well when i go to the general settings to update my iPod nothing is there for me to press for the update. I have no other clue what to do so i need help please!!!
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!
I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
Any other ideas?
Come on, people.
Thanks,
Doug -
Hi,
Regarding my Itunes library:
I'll try to explain my situation (sorry for my english).
I have a networkdrive where all my music is stored on. Itunes is installed on my macbook and I entered the network drive as my media file location.
I use my macbook to rip music and buy itunes music assuming it will all be placed in the media folder that I once entered.
Recently I found out that itunes had changed the location of my media folder to the local drive.
Since a time now (I can't exactly say when) I'm ripping many of my music collection to itunes.
Today i discovered the change of my media file location by itunes after I ripped some collections. When clicking the info button on some of the ripped files I see that they are not stored on my networkdrive, very normal, since the location of the media file is changed to local computer.
When I look in the finder I can find a local libray file (xml file) from 13 april and also one on my network drive but the date is from March. So this one is even older.
I suppose that the libray file is updated each time I add a song in itunes. So there must be anonther library file somewhere?
Is there a way to see which libarary file is used in itunes? I know you can start Itunes with the option key to select another library file but is it also possible to view in itunes which library file is used so I can consult the path of the library file in use?
What should i do to put all the local music to to my network drive and update the correct library to the new location of these files?
Why is there no alert when Itunes changes the location of the media files path?
Thankshi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
MSI calls gt780 a "sound machine" but it has bad dpc latency and ground loop
Good quality sound on a laptop is governed by two things, freedom from ground loops and low DPC latency.
Ground Loop Hum: this occurs when manufacturers use poorly isolated power supplies (CHEAP POWER SUPPLIES). How it manifests is when you plug your laptop into an external sound production system (Stereo or headphones or mixer, etc). Well when you turn up the volume you will notice this weird humming/slightly screetching noise. It often will change pitch as you move mouse etc. Its a ground loop. It comes from poor isolation and ALL PROFESSIONAL audio equipment is designed to eliminate this. Even a cheap ghettoblaster is But not this "sound specialized laptop." Aweful. You will know it is a ground loop because when you hear the noise unplug th epower supply to the laptop and Poof! its gone.
DPC Latency Where as ground loops will just give you poor sound output, DPC latency is a far more sinister problem for a person who is going to use a computer for professional sound. It is related to something called an IRQ request and it occurs on laptops that are not designed to prioritize audio.
Download this tool and run it on your gt780. http://www.thesycon.de/deu/latency_check.shtml You will note its mostly green but occasionally it will have red spikes. Those red spikes represent audio drop outs so if your hope was to use this computer for professional sound capture or production (protools, abletone, cuebase). Think again. Those will be big "POP!!!!!"s when they occur during actual audio manipulation.
Sometimes manufacturers release firmware or drivers that help with DPC. Lets pray but as for the ground loop. That is not and will not go away unless they get it their hearts to use a proper power supply. Shame on you msi for touting this as an audio laptop when its audio simply sucks crap. Basically you threw a few loud speakers and you call it made for sound??? HARDLY.
Other then that its fast. What a waste...Ok, I have found out the "sleep mode" kicking in was one of the major culprits. I dissabled that and latencies are a lot better. No red spikes in over ten minute but not yet under any load. If any one else is trying the program please post your results.
-
I need help manually managing music- I only want select artists and albums in bulk
Hi All,
I am currently trying to sync music with a new Ipod (120GB) and am having diffuculty.
What I have done: I have checked the 'Manually manage music' box and am able to select music I want to sync with the Ipod no the 'Music' Page of the Ipod.
What I am trying to do: I have over 400GB of music, so I only want to select certain artists and albums. In this case I am trying to select batches of music to take across to another PC in alphabetical order. In other words, I want to select all Artists and Albums starting with the letters A, B and C.
What I want to know how to avoid: I am currently being forced to click on every single artist and album starting with A, B and C individually which as you can imagine is taking hours!!! I want to be able to select all artists or albums starting at one point and ending at another point, without having to click individually on each and every line item.
Please help! This is going to take me forever!
KCMEnable the sidebar with CTRL+S if not there
Create a playlist with CTRL+N
Go to the Songs view.
Click the heading of the Album column until it reads Album
Select the first track of the first album
Scroll down the list until you see the last track of the last album beginning with C
Hold down shift and click that last track
Drag the selection to the playlist name and let go
Click the heading of the Album column until it reads Album by Artist
Select the first track of the first album
Scroll down the list until you see the last track of the last album beginning with C
Hold down shift and click that last track
Drag the selection to the playlist name and let go, don't copy duplicates
Drag this playlist to the device, or better yet go to automatic syncing and sync the playlist. You can then edit for the next update when the device isn't connected. You can also create additional playlists for stuff you "must have" on the iPod, new stuff etc. Automatic syncing is easier, more powerful, and more selective than manual management.
tt2 -
Even though the battery inb my Macbook late 2008 shows 99% chrged the indicator glows red(amber?) What do I need to do? s/w is up to date. Plenty of RAM and HD. s/n W8*******1AX
TIA
<Edited by Host>Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters
-
what is going on? how do I fix this? please help
hello? am I missing something? please help me....i've been unable to use lightroom all day.
Message was edited by: JP BradyTwo thoughts:
(1) It is possible that your Adobe software was the result of belonging to a now-discontinued Adobe Print Service Provider program where for a certain annual membership fee, print service providers were provided with (a) both a Windows and Macintosh license to the Adobe print-oriented software products (such as InDesign, Illustrator, Photoshop, and Acrobat) and (b) special direct product support as well as the ability to put your name on Adobe's website as a member of this program. The program ended over a year ago if I remember correctly.
(2) You may wish to contact Adobe Customer Support (not Technical Support) and see if they can track down any and all licenses associated with your company. If you have the names of the former employees who worked with this software, it would be helpful. Likewise, if you were a member of the discontinued Adobe Print Service Provider program, you may have some options for upgrading/updating the software you have.
Unfortunately, you cannot get any more definitive information about your situation on these forums.
Good luck.
- Dov -
I get DPC latency when any network activity is present. This includes WiFi and Ethernet.
I ordered recovery disks in hope that they would fix it but after reinstalling there is no luck.
I also installed driver-less / clean windows also to no luck.
This is the type of latency I'm getting:
http://imgur.com/Yv3lZGTGOOD NEWS!!
I fixed the ethernet - I cleaned all the sockets and connecters internally and removed the WiFi card and this is ethernet http://imgur.com/Euk1NXD
Bad news is the wifi card must be bad if it makes that much DPC. What WiFi card would you recommened? (Under £15 on eBay UK).
EDIT: Is this one any good? http://www.ebay.co.uk/itm/Lenovo-ThinkPad-X220-T420-T520-W520-E520-X120E-WiFi-card-b-g-n-Wireless-60... (I'm sick of intel cards DPC latency) -
Why is the battery depleting when the iPad is not on?
Don't understand why the battery is constantly depleting while it's not in use! #neverusedtodothis
You want it on 'fetch' not push. Push means that mail is pushed out to your device at regular intervals. Fetch means that the program 'fetches' mail when you tell it to, usually when you open the app.
You can look in settings, general and turn off background app update and background app refresh if you want to.
You can also look in settings, notifications and see if you have notifications on that you dont' need. iOS7 defaults everything on that it possibly can but most people dont' need them. For example I could have about 20 things in my notifications, i use two.
If you want to shut down apps you're not using or wanting to run, double tap the home button. You'll see the app icons and a preview show up on your screen. Scroll sideways if needed to get to the ones you want to close, then flick that preview window up and off the screen to close the app. Once you've shut down all you want/need to, either single tap the home button or tap on the preview for your home screen to exit the mode. -
! over the battery indicator when charging.
When plugged in my HTC One M8 is showing an ! over the battery and not charging. I've restarted and reset the phone but it continues to show up. Is there a problem with the battery? Any suggestions?
Well have you updated to the Latest update for the one m8 it is out and it's shown up on mine,
My one m8 is charging right now I have it off the battery indicator in the Display is Horizontal and is showing 53% & the Amber Light is glowing, if you phone is not off try shutting it off use the charger that came with the phone and let it charge at Least 30 min. see what it does let up know on here..
Maybe you are looking for
-
HT204053 How can I add a rescue email address?
I need to add a rescue email so I can retrieve my security questions
-
CS5 Quick-Access Color Picker....anyone found out how to actually use it properly?
Hey there, I'm a digital artist and use Photoshop for the majority of my work. One feature that PS CS5 brought on that i was initially really looking foward to was the new way to select the color i wanted in real time, rather than having to go and cl
-
Can anybody help. I have just downloaded and installed the latest Media Organizer software from creative. But I have lost the . The tab is not available in the settings either. Has anybodyelse had this problem Can anybody help me retrieve my Library.
-
I forget my answers of my questions i click rest by email and nothing come to my inbox ??
When I want to buy an application from the store, he asks answer questions, but I forgot the answers, and chose Forgot answers send me to the site to re-set the questions and answers and chose re via e-mail and write to me I've sent you Lose mailbox
-
Java.lang.NoSuchMethodException encountered when using jar file
Hi Friends I am getting this peculiar exception for some time now and not able to figure out why i get it. I searched the net but seem to not find any proper solution. Here is what i am trying to do. I am using Eclipse(Latest version) and jdk 1.6. I