I have .MPG and .MTS files on my computer. Can I convert at high quality?

I received .MPG and .MTS files from a friend who shot the video clips on a Sony HDR-CX150, and are now on my computer.
Log and Transfer sadly doesn't work because of the disassembled file structure... Total Bummer.
Will these AVCHD camcorders allow me to throw the footage back on the camera, and THEN perform a log and transfer?
(I don't know if my friend still has the manual)
Side note: I bought Aimersoft Total Video Converter and it seemed to work great, but the quality of the video output is AWFUL. I'm so disappointed.

Try MPEG Streamclip for the MPG files. Lots and Lots of posts explaining its use can be found here on the forum.
Did ClipWrap work on the mts files?
iirc, AVCHD seems to be a one way format. It may be worth reading through the camera manual or going to one a website for the camera to see just to see if going backwards is possible.
Good luck,
x

Similar Messages

  • How do i convert mpg and mpeg files

    ok i got all my mpg and my mpeg files on i-tunes
    and i can watch the perfectly
    but when i try to put them on my ipod it doesnt work
    I know i have to convert them
    But what is the best program to use for converting mpg and mpeg files for my ipod

    when i try to use this it says it converts succesfully
    But than wehn i go to look for the converted vid
    I can find it
    I even tried changing where it goes and i cant find it still
    what should i do from here

  • How do you play MPG and WMV files on a MAC?

    I am no longer able to play MPG and WMV files on my MAC. I have Flip4MAC, which is I think what I used to use to play them (but not sure). All I know is that I used to be able to before but now they won't play. Do I need some sort of different software or has Microsoft started making these files in a way that won't allow MAC users to play them? If anyone is kind enough to help, please explain in the most basic terms as I'm not that computer literate.

    If the .mpg/.mpeg files are non-rights-protected you should be able to play them in Quicktime or iTunes. If the wmv files are non-rights-protected you should be able to use Flip4Mac. If the mpg/mpeg or wmv files are rights-protected you'll need the software or subscription that allows you to view copyrighted files.

  • Hi could any one Help me !!! I have No SOund .MTS file in CC Premiere 2014

    Hi could any one Help me !!! I have No SOund .MTS file in CC Premiere 2014

    Rename the top folder your footage is in and import again.

  • Importing .cpi and .mts files into iMovie

    A friend provided me hundreds of .cpi and .mts files of footage he shot on a Canon Vixia camcorder. The files are on a DVD disc. How do I import them into iMovie 09?

    You may have already resolved this issue, but I found out some great information today from Sony directly.  I was having the same problem, and I was convinced iMovie (i'm using iMovie 09) couldn't import MTS files.  I was wrong iMovie does it very easily.  The problem iMovie has is when you connect your camera, most people click the "video camera" icon so they can see the videos on their camera they wish to import.  What I found is that if you haven't cleared off your video camera in some time, and have over 10 gigs of video on the camera, iMovie has a real hard time, because it has to search the camera and bring up the clips in that lower window pane and often times it will basically time-out, and if you click that camera again the iSight camera launches.
    What I did was go thru the clips on my video camera that I could delete (actually watched them on the camera itself), this can be time consuming.  But, once I cleared down the content on my camera under 10 gigs, iMovie saw the information quickly.  Here's another thing I did, that also may help...instead of clicking on that little camcorder icon, use FILE, Import from Camera at the top menu bar instead.  When I did this, it started looking for my attached video camera.  From now on I will clear off my video camera more frequently so that iMovie doesn't bog down looking for possible imporatable videos on the camera.  Recommendation from Sony was keep it under 10 gigs.
    Hope this helps.
    Tim
    P.S.  There is no truth to the idea that iMovie does not import MTS files.  My Sony HD Handycam takes all MTS files and iMovie has no problem with them at all.

  • Premiere 9 and .mts files

    Does anyone know if Premiere 9 supports the Canon Vixia .mts files.  Is it necessary to convert before importing and editing?  I've have not been editing in a while.  I still have Elements 2 and my mini dv camera just died.  Looking at one of the Vixia HF models and upgrading to elements 9.  Any suggestions?

    If one only has two physical HDD's, I would do a layout such as this:
    C:\ OS, programs and Page File (Windows Virtual Memory)
    D:\ Assets, Project and Scratch Disks
    If I had three HDD's (physical and NOT partitions), then I would split out the Assets and the Projects/Scratch Disks.
    The idea is to spread the I/O load over as many physical HDD's, as is possible. In PrPro circles, users spread Exports to another HDD, and also break out Audio from Video and place those on yet another HDD. The more HDD's, the better for total performance.
    Good luck, and hope that helps,
    Hunt
    PS - though I have one 3x HDD setup and then an 8x HDD setup, I often edit to/from FW-800 HDD's, to migrate my Projects between the laptop and the workstation. In that case, I have all Assets, the Project files and the Scratch Disks on the single external HDD. That is less than ideal for pure performance, but allows the migration, so I live with a bit of a slowdown. This ends up being like a 2 HDD setup, except that the FW-800 external is not as fast as an internal SATA. I live with that setup fine, so if you have only two SATA internals, you will still be ahead of me, with those migrating Projects.

  • Transfer data ,mpg and avi files to zen x

    how can I move some data ,mpg and avi files to my zen xtra?Message Edited by szycha on 03-0-200606:32 AM

    I use the Nomad Explorer software, but, depending on you machine, firmware... there probably are different ways. What operating system (PC) do you have and what firmware (mp3 player)?

  • I have imovie and my files (movies) open.  Why can't I drag the clips into iMovies?

    I have imovie and my files (movies) open.
    Why can't I drag my clips into imovie?

    Drag and drop doesn't work - instead do a File -> import -> movies and select from there.

  • HT3275 Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)

    Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)
    I am Backing up to a Lacie HD 1tb.
    I also use the drive to store Current work on as well as my Time Machine Backup.
    Thanks!

    Read the following link to get a clearer idea on how to approach trash problems.
    Solving Trash Problems    and this is a link to download Trash it. 
    Download Trash It! for Mac

  • Mpg and 3gp files

    I am new to imovie and having trouble getting past the first step!! I cannot get any of my files to import. They are all .mpg and .3gp files.  What can I do to make them import?  HELP!!

    QT does not export sound from muxed mpeg files: QT Mpeg Limitations. This freeware should do the trick: Mpeg StreamClip
    If the mpegs in question are mpeg-2 you will need to buy the mpeg2playbackcomponent from Apple ($20 US). Note that these programs will not work with encrypted Hollywood movies.

  • I just bought an HD movie on iTunes.  Yesterday, I watched all but twenty minutes of it on my Dell laptop.  Today, I tried to open it on the same laptop, and it told me my computer can't play HD movies, that I have to view it in SD.  What is happening?

    I just bought an HD movie on iTunes.  Yesterday, I watched all but twenty minutes of it on my Dell laptop.  Today, I tried to open it on the same laptop, and it told me my computer can't play HD movies, that I have to view it in SD.  The error message said that my computer didn't have the capabilities, but I have several other HD movies that I have always and can still watch without issue.  Just this one doesn't work.  Why, and do you know how to fix this?

    Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

  • Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • If i got an iphone 5 and synced it with my computer, can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract? (So that i will still have the same contract)

    If i got an iphone 5 and synced it with my computer,
    can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract?
    (So that i will still have the same contract) (I have verizon.)

    Ask Verizon.
    You will have to activate the phone through them.

  • I don't know how to install Mp3 and PDF file from my computer to IPhone?

    I don't know how to install Mp3 and PDF file from my computer to IPhone? Please who can help me. Thanks

    Please Get the iPhone User Manual for iOS 5.
    Put such files into iTunes, sync to phone. Everything syncs from iTunes to phone.

  • I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    Your only recourse is to force it into DFU mode:
    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

Maybe you are looking for