I have multiple views of every album for every song

I have multiple views of every album for every song

It should be possible to do this in Multicam - as long as the soloist's voices can be clearly distinguished - but it's a bit complicated to explain it step by step!
I strongly recommend you watch the Ripple Training Tutorial on Multicam Editing in Final Cut Pro X to get the best out of it. (Costs $29.99).
Andy

Similar Messages

  • Possible to have multiple views for one scene?

    Away3D allows multiple Views to be created for one Scene, allowing different camera positions for the same geometry.
    Can Proscenium support this? I've been banging my head against a brick wall for a while now...
    Joe

    Hi Kopaacabana,
    (I  feel like I'm in one of those post-apocalyptic scenes where the last two humans left on earth finally meet.....)
    Thanks for answering!
    Yes, I've actually got two cameras quite happily working in the scene, the problem is that I need to re-use the geometry for the scene in two windows, or at least, two separate parts of one window simultaneously. Away3D can do it very easily, where one sets up a 'View', which has a 'Scene' it views. With Proscenium it seems that the whole thing is tied up with an Instance3D, which is fine for one camera, but the scene nodes seem tied up as children of some root scene node. I've tried assigning the scene data as a child of two instances of BasicScene (hacking the stage3ds[number] to be different for each), but that causes an exception.
    Just changing the activeCamera changes the view to the new camera, where I actually need to be able to render to two windows/screen areas from one set of geometry.
    I would have hoped that the paradigm would have been 'here is some geometry, lights, etc., now do with it what you will'
    Adobe, are you there to help us out, like, anyone at all? Are we wasting our time with this?
    Joe

  • How can I have multiple views for my question

    When I posed a question on a forum, it indicates that I have one (1) view. How can I have multiple views on the same question?

    I believe the number you are looking at is the number of times a particular thread has been looked at (viewed) by different users. When someone else opens your question, the view count should increase.
    Justin

  • How do I get Itunes to properly import a cd without making a different album for each song..

    I try to import my cds, and everytime it features another artist it creates a new album for that song... how do I get it to imort the album and show as just the album name...

    Hi
    All my tracks are MP3.
    In List View, I do not have an Album column I have an Album by Artist column.  If I click on this column the albums look right in the playlist on the screen but when I burn to the CD the tracks are not in one folder per album instead they seem to be in folders per Artist then Album, which as one of the albums is a compilation has created about 30 folders.
    If I switch on the 'Sort by Album' column it burns the disc as I expected.

  • Can I have iTunes find my missing info for my songs and albums that are already on my computer?

    I have missing info on a lot of my songs and the albums I had put them on by CD awhile ago without internet and I cant redo them because I dont have the CDs anymore. Can I have iTunes find the info for them?

    Google "TuneUp" it should be the first result. TuneUp is a paid application though, there's another application called MusicBraiz which is free, but this one is a little complicated I think. Hope that helps

  • Do we need to have Multiple Vendor Roots in PPOCV_BBP for Multiple back end

    hi Gurus,
    Do we need to have multiple vendor root orgs in PPOCV_BBP, when
    we have mutliple backends to be linked to the same SRM server ?
    Please do provide your valuable inputs.
    Best Regards
    Prashanth

    Hi
    Ideally, you should have only one Root node for Vendor.
    Please refer to these links.
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/b4/9de8cc7d4b11d2b423006094b92d37/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/e5/1c6d3e40753f7ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm</b>
    <u>Also refer to transaction - BBPMAININT in SRM Web page for Business Partners.</u>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • Why do I have multiple birthdays listed in ical for one person

    Other devices show only single birthdays (iPhone, iPad, web based login to iCloud).  Just the MBP shows multiple birthdays that are listed for individuals and usually three per individuals=.

    The Calendar app pulls birthdays from the Contacts app.
    If you also have another Birthday calendar with the same birthdays, they will show up twice.

  • Is it possible to have multiple lines of text show for an event in monthly view?

    as an example, have a few lines of flight info show up without double clicking on event and it would be nice to have the entire event in a monthly printout too. Thank you.

    Hi Scott,
    Thank you very much for your reply and I apologize for getting back to this so late. I started using your suggestions today and I did have some success! The "shadow" button is very clever. Now, I think my lack of javascript syntax knowledge is keeping me from getting it all correct. I experimented with one field, a date field and I created the shadow button as you suggested and it worked perfectly!. The successful code I used for the click event for the gray button (see image below), was:
    form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrShadowButton::click - (JavaScript, client)
    if (form1.SSA.SF_Approver2RIF.Approver2RIFDate.rawValue == null) {
    xfa.host.messageBox("Please fill in all required fields");
    else form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrButton.execEvent("click");
    However, I have not yet had luck getting the other fields in that row to work like the date field has though. I don't think I'm coding the "or' part correctly when I begin to add the fields (the next one I'm trying to add after the "or" is the "Name" dropdown list box, but maybet the dropdown list doesn't count as a "null" value like the Date field does?
    My attempt at adding the name field so that two items are being checked is something like this but it does not work:
    form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrShadowButton::click - (JavaScript, client)
    if (form1.SSA.SF_Approver2RIF.Approver2RIFDate.rawValue == null){
    or
    (form1.SSA.SF_Approver2RIF.Approver2RIFName.rawValue == null)
    xfa.host.messageBox("Please fill in all required fields");
    else form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrButton.execEvent("click");
    Thank you so much for any additional insights you or the other members may have. I really appreciate it!
    -Chris

  • Multiple view state best practice for IOS packaged app - Tabbed view or blank template?

    TabbedViewNavigatorApplication or plain Application?
    I have an iPad app that has a fairly complex main view.  Has lots of view state changes.  Before a user can get to that main view, however, they have to go through two other screens:
    1.  Authentication
    2.  Fill out and submit a small form (maybe 6 fields)
    If they do those two things right, they can move on to the main view.  If they don't, they can't move on and the main view shouldn't load.
    Don't want a tab bar showing in the main view.  Has to be full screen.
    My thoughts were:
    1.  Start with the tabbed view template because it's built for this.  Just figure out a way to hide bars top and bottom for main view.
    2.  Use a blank template and do everything with standarf Flex view states
    Not sure...

    Or you can go with door #3, a blank template with a ViewNavigator you use to push and pop your views from the Main.
    View states are heavy. Avoid them like the plague in mobile apps. They are ok for small things like buttons and such, but that's about it.

  • Multiple albums for one song?

    Is there any way have a song show up in multiple albums without duplicating the song? I have a lot of these, mostly songs that show up on soundtracks. I want 'Whiter Shade of Pale' to show up on 'Procol Harum' and 'The Big Chill Soundtrack.'

    You can always add the other album names to the comments section of the file if it means that much to me.
    Personally, I only list the name of the collection (soundtrack, best of, etc.) if it is the only version I have of it. But if I later import the original album, any of those songs that are also on a best of collection (after verifying they are truly the same versions) I delete the Best of or soundtrack version and retain the one with the original information (album name, date, etc.).
    Patrick

  • View Playlist by Album NOT by Song

    Hi
    Sorry if this is a stupid question, I've done a lot of searching but can't find the answer.
    On an iPod can I view, for example, my Recently Added playlist by album? At the moment when I go to this playlist I just get a list of songs, albeit sorted in album order - so if I want to listen to a particular album I recently added, I have to remember the name of the first track on that album and scroll down to it.
    This isn't practical, or always possible. Surely the playlist can also by viewed by album? Or will it only list each individual track on every album in the playlist?
    Thanks for any light you can shed...

    I'm trying to keep my wife's music in a somewhat seperate location so she doesn't have to scroll past all of my stuff (which she doesn't like). I thought if I had her albums in a playlist, she could go right to that. Viewing the album menu shows too much that she doesn't need to see.

  • Is cover flow in iTunes supposed to have a list of every song you have?

    When I go to the cover flow feature in iTunes and I go to an album, it has a list of every single song I have on iTunes underneath of it. I would expect it to just have a list of the songs in that album, but I am new with iTunes so I wasn't sure. Is this how it is supposed to be? And if not will it affect how my iPod's cover flow works and how can I fix it?

    Cover Flow just helps you browse your library by album cover and (unless you have it in fullscreen mode when it fills you whole display) only takes up a portion of the top of the main pane. The rest of the pane is the normal list view of your library. Clicking on an album cover takes you to the first song from that album that it locates in the list.

  • Creating a Folder or Album For Miscellaneous Songs In iTunes

    Hi! I'm not even sure how to search for the question that I have, but maybe someone here can help me. I want to keep all of my hundreds of single songs (mostly purchased from iTunes) in one spot, so that they don't clutter up my album catalogue when I search by Album in iTunes (ie I only want full albums to show in my album catalogue). I used to change the album name of all of my single songs to "miscellaneous music," but iTunes isn't letting me do that anymore, for some reason. It keeps changing the album names back to their original names. Is there a folder that I can place them in? A way to create a huge compilation album? I have a pretty sizable music collection and any ideas for how to keep my iTunes organized in this way would be so helpful! Thanks!

    What you suggested is better for my immediate needs and would have been easier than what I did which was put a note in an unused IPTC field.
    What you suggest creates a new album, but it's static. In other words if I change the rating to 0, the photo is still in the album. I was looking for a dynamic (smart) album which would change (the contents of the album would change) if I starred or removed stars from photos.
    Thanks for the hint though. I might use it in the future if I don't think I'll need the dynamic album.

  • I have multiple files that appeared when I imported songs. They have names like TFS_TRECG_L46. They are copying themselves and filling up space. I have run Norton and Spybot. Nothing is showing up. How do I fix this issue?

    Thanks.

    The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
    Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
    Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
    Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
    So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

  • When I import a CD album that includes songs with co-artists, the album is saved once with all of the songs with the main artist only, and then one album for each song with a different co-artist.  How can I avoid that or fix that result after the fact.

    When I import a CD ablum that includes songs with co-artists, the album is saved once under the album name with all the songs from the main artist; then each song with a different co-artist is saved separately under the album title with just that song.  Who do I prevent that or fix it after the fact, i.e., copy the single songs to the main album?

    Why aren't songs with the same album art grouped together? - http://support.apple.com/kb/ts1468
    Compilation checkbox is under options tab when editing multiple tracks at once.
    https://discussions.apple.com/thread/4559720 - discussion of using compilation vs. album artist to group tracks
    Jan 2014 discussion: https://discussions.apple.com/thread/5775641

Maybe you are looking for