I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable not working!!
I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera.
While holding the option key, click the in the menu bar and select System Information. Select Firewire in the Hardware section and see if your camera shows up as a connected Firewire device. If not, then you have one of three basic problems:
1. Defective Firewire cable
2. Defective Firewire port on computer
3. Defective Firewire port on camcorder
Rule out any of the above by trying a different cable, Firewire device (like a hard drive) or try your camcorder/cable on a different/friend's computer.
If you suspect a Firewire port problem on your computer, you can try resetting it by shutting down and disconnecting the power cable to the computer. Wait for 30 minutes and plug back in and startup. You can also try resetting Parameter RAM (PRAM) on the iMac. (Apple's Instructions for reseting PRAM)
Similar Messages
-
Canon GL2 and Belkin 800/400 9-pin to 4-pin firewire cable not working!!!
I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.
Please use:
http://help.apple.com/finalcutpro/cameras/en/index.html?
to see if your GL2 is supported. Also you probably should also post int eh Final Cut Pro forums. -
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
-
I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor -
I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.
Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. -
I am new to FCP. I have a canon 60d camera and purchased fcpX. I was recommended to download mgep streamline and convert my files to prores422. I do not have an option for prores 422 in my download. How can I fix the problem.Please help. There was another suggestion by vimeo.com to use applexdcam ex 1080p30. I do not have that either in my mpeg download.
For future reference, you will most likely get more knowledgeable answers if you post in the FCP forum where the folks who use the product regularly hang out:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x -
How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.
-
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
Hello, I have purchased and installed Lightroom 5 on my Mac Desktop. I travel with a MacBook Air and would like to have Lightroom 5 on this device as well. The MacBook Air does not have a CD/DVD slot. How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?
Adobe - Lightroom : For Macintosh
Just download and install 5.7.1. Don't worry about earlier versions.
You'll need to enter your serial number to license the software. -
Hi, I have recently got myself a second hand computer MAC OS X Version 10.4.11,Processor 800 MHz PowerPC G4. Have only used windows before. Unfortunately I managed to uninstall Adobe but now can't seem to reinstall as this an older computer and is not compatible with the new versions. Sorry to sound thick but really have never used Apple before. Would really appreciate any help at all. Thanks..
Windows or apple it makes no difference, if you don't have the install discs you can't install.
Did you buy the machine with Adobe (you don't say what adobe program you're talking about) installed? If so the vendor should have given you the discs or else it's technically a pirated copy. If you're talking about acrobat (which is free) then you should be able to find older versions on the adobe site. -
I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?
Yes. Back up the Library.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
I have a song that skips on my main mac because its a downloaded copy. But on my other devices(iPad, Apple TV) it does not skip because its in the cloud. How do I put a downloaded song back into the cloud?
Delete the track from the iTunes library, but not from the cloud.
-
I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.
Voice navigation is not available for the iPhone 4
-
I have just lost all my contacts from my Mac and my I Phone. Don't know how. Can I get them back? Not using Time Machine
If you have no backups, and data has been lost, then it's lost forever. The rest of your data will inevitably follow if you don't back up.
Maybe you are looking for
-
Can i share my itunes library with my ipad
I have my itunes library on my desktop computer. Can I share it onto my ipad?
-
How to get all JFrames in one window.
I have a JFrame with menu system. When the user opens a file using the menus and filechoosers,another JFrame is called wherein the required output is displayed. If another file is chosen,the data of the previous file is not cleared from the runtime m
-
SQL statement doesn't return data
Hi, Please I am facing a problem where I took the sql statement from an oracle report and I'm applying it on TOAD 9.0 but it is not returning any data. The thing is that on the application the report returns data but as I checked on the TOAD it showe
-
2 BIW connections to 1 R/3 system
Hello, We have one R/3 system to which we want to connect 2 BIW systems. The BIW systems will be picking data from the same client in the R/3 system. when i try to configure the rfc connections, it fails since the client can have only one logical nam
-
Hi all, just signed up for broadband and phone and requested to keep my current number. On finishing the order the online confirmation confirmed my number would be my existing, however I've no received an email which shows a new number as does the on