I have my keyboard (m3) set up through midi

I have a korg m3 set up through midi with a m-audio profire. I will record a sound from 1 setting on my keyboard through logic, search a different setting to find another sound and as soon as i switch settings (from synth to organs), it changes the previous sounds i had. How can i fix this???

From you question it seems you don't have an understanding of what MIDI is and isn't. Rather than type a lengthy explanation I suggest going to Google and and type in... What Is MIDI
Short answer, MIDI recording is only data, not sound. It simply plays back the recorded data (note, duration, velocity) to whatever sound the hardware is set to.
What you need to to is set up the keyboard in a multi-mode or performance mode. Different sounds assigned to different MIDI channels. Turn keyboard to "Local Off". Then as you select external MIDI tracks (set to separate MIDI channels) in Logic you should hear the independent sounds from the keyboard.
The other option is to record the audio from the keyboard.
pancenter-

Similar Messages

Illustrator CS6 does not honor Full Keyboard Access setting

Why does Illustrator CS6 not honor the Mac system setting for Full Keyboard Access? Under System Preferences > Keyboard > Keyboard Shortcuts, I have Full Keyboard Access set to allow the Tab key to cycle between "Text boxes and lists only". But Illustrator allows the Tab key to focus on all controls, including buttons. Is there a setting somewhere in Illustrator to change this behavior?

You can try to edit the keyboard file, but you need to find out the code for the Danish keys.
http://forums.adobe.com/message/2984641#2984753

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

Is there a cd that came with the printer?
If so, put in the cd and that will help you set it up.
If not, I think macs come with a program that helps you set up printers.
Also make sure that the printer is connected to the same network.
Make sure the printer is on.

How to change keyboard shortcut for cycle through open tabs in PS and AI CC 2014

I would love to set my own keyboard shortcuts for cycling through open tabs in PS and AI 2014 on OS X. I found out that this can be achieved with ctrl+tab in PS, but I couldn't manage to make any of the suggestions in the forum work for AI. As said, I would like to set a more "standard" shortcut like alt+cmd+arrow-keys for both of the apps. If that shouldn't be possible, does anyone know a shortcut in AI CC 2014?
Many thanks!
Amadeus

Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

I have a gmail account set up on my macbook pro. One mail I sent with photos continues to repeatedly downloaded in Recovery. At the same time my Gmail won't download new emails into Inbox when I press Get New Mail. Help

I have a gmail account set up on my mac. A few days ago I sent an email with photos in it and this email now is continuosly being recovered. In the meantime my inbox has stopped downloading new messages, even when i press Get New Mail. How can I stop the repeated recovery of the email and how can I get my inbox to download again?

OK, I persevered and used the Rebuild mailbox option on Mail, actually had to do it twice, but now when I boot up and Mail opens all the previously received iCloud messages I've read on iPhone/iPad are pushed through.
Back to normal...

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Windows server 2012 R2 PXE boot is unworkable slow, I have this exact same set-up working in 2008 R2 What can I do?

Hi there
I'm trying to deploy a windows 7 image through Windows deployment services via PXE boot from a 2012 R2 server.
Issue: PXE boot is extremely slow, it takes up to more than 60 minutes for the device to download download the PXE boot
Things I already tried to get this up and running:
I've tried to change the TFTP block size via command prompt and via regedit
I've changed the settings on the tab of the WDS role (go to WDS role -> properties on server -> Tab "tftp")
Both actions resulted in PXE boot being even slower than it already was.
To make sure this is not because of our environment I’ve set up the same configuration on a windows server 2008 R2, here PXE boot image is downloaded to the machine within 3 minutes.
Both servers are set up through Hyper-V this is the configuration:
2008 R2:
Memory: 4096 MB
1 Virtual processor
IDE controller 2 hard drives
Network adapter
2012 R2:
Memory: 4096 MB
32 virtual processors
SCSI controller 2 hard drives
Network adapter
I can’t imagine that PXE boot is not working because of the differences of the Hard drives controllers or because of the amount of the virtual processors.
Windows server 2012 R2 seems to handle PXE boot TFTP differently in comparison to 2008 R2.
Do you guys know what I can do/try to get this working?

Hi Jacques Rodrigues,
You can run Windows Deployment Services on Hyper-V virtual machines,
that the performance will often be degraded, particularly during the Trivial File Transfer Protocol (TFTP) download phase. This phase is very resource-intensive and may
fail if insufficient resources are available on your server running Hyper-V.
If you are using multicast, Check if IGMP Snooping is enabled i.e. Routers that support multicasting. In particular, Internet Group Membership Protocol (IGMP) snooping should
be enabled on all devices. This will cause your network hardware to forward multicast packets only to those devices that are requesting data. If IGMP snooping is turned off, multicast packets are treated as broadcast packets, and will be sent to every device
in the subnet.
The related KB:
Windows Deployment Services Overview
http://technet.microsoft.com/en-us/library/hh831764.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why can't I launch another app using a URL scheme in a web clip set up through Configurator with the "full screen app" option selected?

My company uses web clips on iOS devices, set up through profiles on Configurator, for EVERYTHING. Most of these web clips have a transfer function on the site that allows the user to bring up other apps, like directions to a destination in Google Maps for instance (a URL scheme.) If the option for the web clip to appear as a "full screen app" is selected in Configurator (or iPhone Configuration Utility), this fuction does not work on devices that are running iOS 7. It is imparative to our company that the web clips be full page so there is no address bar, back button, etc. for the users to access. With this feature not working, I have 50+ iOS devices that are usless to us.
iOS 6 Device --> Configurator 1.3 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> Configurator 1.4 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.3 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.4 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.3 --> NOT Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.4 --> NOT Full Screen Web Clip--> WORKS
iOS 7 Device --> iPhone Configuration Utility --> NOT Full Screen Web Clip --> WORKS
Somebody, please help!

Phil, I have been trying to figure out a solution to this problem since iOS 7 came out. In hindsight, I should have downloaded the beta versions of the iOS so I would have had even more time. I have talked with quite a few different developers and up until today it was a consensus that this was a "feature" of iOS in an attempt by Apple to diminish the use of webapps. Now most of these people wouldn't be considered apple apologists by any stretch, which could have contributed to their pessimism. That being said, today I finally received some news that could give us a glimmer of hope. I spent almost 2 hours on the phone today being sent "up the ladder" until I think I found the right person to help (I'm not complaining; I was surprised at how competent and helpful each person that I spoke with was, and I didn't have to explain the situation over and over again.) I think what took so long finding the right person to speak with was that this isn't an issue that any type of troubleshooting would fix. It's not an iPad, iPhone, or even an Apple Configurator issue; it's actually a bug in iOS 7. Anyways, the senior engineer that I spoke with reassured me, very adamantly, that this was not a feature of the new operating system and most definitely a bug. He said that they take webapps very seriously and are actually looking for ways to improve how webapps work on iOS devices and how they are used with Mobile Device Management software, like Configurator. I was a little concerned that he said this was the first he or anyone on his team has heard about this problem, but he did work extensively with me today and said that it looks to be a major issue, and something that he and his team are going to try to figure out as soon as possible. He said he would be calling me by Tuesday with information on how and when this will be fixed. Jon

The multi-tabs is not working all the time. Windows7 Firefox 4.0.1 I have the correct opetions set for multi-tabs.

The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.

Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]

I have a daily news subscription paid through iTunes and it's now telling me it cannot find my subscription.....what should I do?

I have a daily news subscription paid through iTunes and it's telling me it cannot find my subscription . How do I fix this?

Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

SSL & iChat Accounts Set-up Through Directory Utility

I am having a problem with iChat when connecting clients to the services on my server via Directory Utility.
Once set-up through Directory Utility, I launch iChat and cannot get into the account automatically set-up by the server. It just says "Disconnected Unexpectedly".
I can create a brand new account in iChat and it connects fine. The difference is that the account "managed by the system administrator" is set to "Use SSL" using Port 5223. If I create a new account, it uses Port 5222 with no SSL.
Does anyone know where this "Use SSL" option is set on the server (and how I can turn it off)?
I can have my users connect manually, but I'd rather have the server automatically manage buddy lists and stuff like that.
Thanks for any ideas.

I think I solved this.
For anyone else with this problem, you can change these settings in Workgroup Manager>Preferences>Details. Edit com.apple.iCHat.Managed. Change Often>XMPPAccount>AutoDiscoverHostAndPort> to integer:0 and UseSSL to integer:0.
This was not my problem, though. My real issue is caused by a case inconsistency in my hostname. Due to settings in NetBIOS and DNS on my network, I had to give the host an all caps name. iChat is looking for a lowercase name. This can also be fixed in Workgroup Manager>Preferences.

I have just purchased an ipad 2 (already have an inpad1) and after syncing through itunes it will not conncect to my home wifi connection. The first ipad connected immediately when bought. this one indicates my wifi address but states not connected.

I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!

What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc

Locking the keyboard backlight setting

Hi All,
Just got a new t430s to replace a dell e6420.
I'm wondering if there is any way to force the machine to remember the keyboard backlight setting. It gets reset when the machine goes to sleep or the display turns off, very annoying!
I know I can press fn+space to get it back but it seems like it really should remember it or at lest be able to take a default setting, that's what my dell did.
I've poked around the bios settings and power options and can't find anything.
Thanks.
Solved!
Go to Solution.

kennethm wrote:
I'm wondering if there is any way to force the machine to remember the keyboard backlight setting. It gets reset when the machine goes to sleep or the display turns off, very annoying!
None that I'm aware of. There are a couple of other threads on this topic in which people have expressed a need for this or similar feature, e.g. Possibility to activate keyboard backlight automatically
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

InDesign CS4 launches with missing workspaces, keyboard shortcut sets, etc

Due to the mixture of multiple issues in this thread:
http://www.adobeforums.com/webx/.59b6c639/
I'm starting this as a new topic to focus on the cases where InDesign CS4 users are able to launch and use the product, but are missing resources such as the following types of presets: Workspaces, Keyboard Shortcut Sets, and Swatch Libraries.
All reports of this issue appear to be related to user permissions. For these resources to to be accessed you must be running InDesign CS4 with an account that has read/write access to the following folder, including it's subfolders and all of their content:
C:\Program Files\Adobe\Adobe InDesign CS4\Presets
If you have a setup where you are running into problems getting resources from this folder to appear in InDesign CS4, and you believe your user account has read/write permissions to all of it's contents, please let me know as I'd like to work with you to find a solution.

The complete fix from start to finish for my problem (InDesign CS4 launching without toolbars or keyboard shortcuts when logged on without Administrator priviliges) is below. It's actually quite simple once you know how... The problem is just getting all of the information in the same place. Hopefully it will help others having the same problem.
1.        Install CS4 from the 2 installation CDs. Allow a couple of hours from start to finish.
2.        Log on with an Administrator account:
a.        Navigate to “C:\Program Files\Adobe\”.
b.        Right-click on the folder named “Adobe InDesign CS4”
c.        Click Properties
d.        Click on the Security tab
e.        Change permissions for Users to Full Control
f.         Click on the Advanced button and ensure that there is a check in both of the boxes (inherit and replace permissions).
g.        Click Apply to reflow the permissions
h.        Click OK twice.
3.        Navigate to the following locations and rename each of the EN_UK folders to EN_US:
a.        C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Workspaces\
b.        C:\Program Files\Adobe\Adobe InDesign CS4\Presets\Page Sizes\
c.        C:\Program Files\Adobe\Adobe InDesign CS4\Presets\Start Page\
d.        C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Shortcut Sets\
4.        With a user account, launch Adobe InDesign CS4 and immediately hold down Shift, Control and Alt together. Click Yes to delete the InDesign Preference files.

I have my keyboard (m3) set up through midi

Similar Messages

Maybe you are looking for