I have my passcode set to unlock my ipad, when i go to reset it doesn't accept it

My iPad wont accept my passcode to change my settings. It unlocks my phone but if i go to reset settings it wont accept that passcode. Is there a secondary code i might have missed? Ive tried changing the code but it didn't help. I don't have access to a computer at the moment or i would have tried syncing it already. Any thoughts/suggestions?

I'm not sure. How can i find that out? It is possible as i have to enter my account password multiple times in order to buy things (part of the reason why i want to change those settings, its annoying). If it is ive no idea what the code is. Is there a way to reset that without a computer?

Similar Messages

HT5312 How to unlock my ipad when I forgot my passcode

how to unlock my ipad when I forgot my passcode. Its been disabled for 2 days

You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

HT1212 How do I unlock my ipad when i have forgotten my password

How do I unlock my ipad when i have forgotten my password

You have to restore your iPad. Force your iPad in recovery mode by following the directions in this link:
http://support.apple.com/kb/ht1808

How do I unlock my ipad when it says it's disabled connect to itunes?

How do I unlock my iPad when it says it's disabled connect to iTunes?

You have to wipe your iPad, and restore as new. Everything you had on there is now gone, unless you had it elsewhere.

How to unlock an ipad when disabled

how to unlock an ipad when disabled

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

How can i unlock my ipad when it show connect to itunes

how can i unlock my ipad when it show connect to itunes

Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

How do i unlock my ipad when it's disabled and says connect to itunes

how do i unlock my ipad when it's diasabled and says connect to itunes?

Please see: http://support.apple.com/kb/HT1212 for full details.
Regards,
Steve

I have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but no

i have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but not from the actual device

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to unlock my ipad when i forgot my passcode

i forgot my passcode and i would really like to have my ipad back.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1349 How to unlock my iPad when some else usesd a passcode

How can I unlock my ipad after someone else have put a passcode on it.

Restore the iPad from the computer to which the iPad is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPad into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.

Hi, I have change my password on my mini ipad when having a drink and have forgotton it. Can you help please? Shaun

Hi, I have changed my password on my mini ipad after a few drinks and have forgotton the password, can you help please?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1212 ipad disabled, but I can't connect t o iTunes because it's locked. How can I entere my code to unlock my iPad when the it's disabled.

when I try to connect my ipad to my itune account it does not allow me to do that. I've followed the instruction , but keep getting the same result " ITunes could not connect to the iPad because it's locked with a passcode. I have never connected this iPad to This computer.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Ow to unlock my ipad when i lost my security code?

i'm having difficulties to unlock my pad, after forgotten and typing my code several times.

If you've forgotten the passcode to unlock your iPad then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via computer that it hasn't been synced, and which therefore doesn't have a backup on it, then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I put my sim card into a new iphone and tried to change it back to the old one and now the phone is locked. It's asking for a passcode and I didn't have a passcode set up.

Hi! I need help! I put my sim card into a new iphone (3g) and then tried to put it back into the old one to get my contacts from it. Now the old iphone is locked and it's asking for a passcode, but I never set up a passcode on it. Has anyone experienced this or does anyone know what to do? Thanks!

Not sure if this applies to your region, but in Australia the SIM password is often written on the "credit card" sized plastic card that the SIM was provided to you with the phone by the telco. Do you still have this? It could be in the iPhone box?

I have hp photosmart 5512 and I need to have a printer set up to my iPad, do I need to do it from my computer?

I have hp photosmart 5510(72f0C3) printer and I would like to setup a printer to my iPad. My network is NETGEAR23. Serial number is CN19E04613005NR. I really need help to have that set up.

Windygirl wrote:
I have hp photosmart 5510(72f0C3) printer
Only the HP Photosmart 5510 e-AiO B111a is included in this document as AirPrint-enabled. Anything other than that exact model number is unknown. There is no mention of an "hp photosmart 5512". Check HP's website for a potential firmware update that may address AirPrint compatibility.
Otherwise you will need to buy an AirPrint printer or multifunction device.

I have my passcode set to unlock my ipad, when i go to reset it doesn't accept it

Similar Messages

Maybe you are looking for