I have NAS200 working fine. Of late I found that its performance going down

I have NAS200 working fine. Of late I found that its performance going down. May lot of stuff delated and coppied on these network drives. Looking for some tool to carry out disk defragmentation and scan disc on network drives. How can I do that without taking out HDD from NAS200

Defragmentation of a network drive is impossible. Over the network, your computer only has access on a file-by-file basis, not on a sector-by-sector basis.
If it would be possible to access the disk over the network on a sector-by-sector basis, it wouldn't help anyway because your computer would have to understand the XFS or ext2 filesystem to be able to defragment it, and Windows doesn't understand either.
Furthermore, because of the way XFS and ext2 work, fragmentation is much less of an issue than with e.g. FAT32.
If your NAS200 is getting slower over time, it may be possible that your hard disk is slowly but surely dying, and that what you're seeing is that it's correcting low-level errors by retrying reads and writes. It's probably a good idea to check that you have a reliable backup. You do have one, don't you?
===Jac
Frequent NAS200 Answers:
1. DISABLE the "convert failed logins to guest logins" option to fix permission problems.
2. NEVER insert or remove hard disks while the power is on. NAS200 doesn't support hot swapping.
3. ALWAYS use the power button to turn the NAS200 off, don't just unplug it.
4. Don't trust RAID. Make BACKUPS!
5. To ACCESS the disks directly, you will need ext2 and/or XFS file systems. I recommend using SystemRescueCD.
6. Disks will get HOT with standard fan, use "green" disks or consider replacing the fan.
7. FTP server is insecure and doesn't work behind a NAT router. Use my firmware and SCP instead.
8. MY FIRMWARE supports SSH shell prompt and SCP for secure file access, and allows running other software.

Similar Messages

I have a onyx boox 60 and just found that its no longer in the list of compatible devices. Is there a workaround? I really don't want to buy a new e-book reader. thanks and regards

does anybody know how to connect the onyx boox 60 to use it as a device for adobe digital editions. thanks!

does anybody know how to connect the onyx boox 60 to use it as a device for adobe digital editions. thanks!

HT1267 I have a factory unlocked Iphone 4S, it worked fine but it was lossing the signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later??

I have a factory unlocked Iphone 4S, it worked fine but it was often lossing signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.

Repair itunes library (damaged) file. Multiple iTunes libraries on an external harddrive. All libraries have been working fine. Do some "housecleaning" on a one of the large libraries 296GB. iTunes quit and now has damaged file. 296 GB still on HD.

How to repair itunes library (damaged) file. Multiple iTunes libraries on an external harddrive. All libraries have been working fine. Do some "housecleaning" on a one of the large libraries 296GB. iTunes quits and now has damaged file. 296 GB still on HD.

The duplication is unnecessary. Exporting creates a duplicate of the file. So now you'll have a duplicate of a duplicate. Exporting is not "working on" a file.
No it's not merging, it's exporting from one to the Finder and into another. No matter what lose something. If you export the Original you leave behind all the work you've done in iPhoto. If you export anything else, you lose the non-destructive editing and the ability to revert to the original. With merging you preserve that work. Yes, you can trash the old Library when you have completed the manoevre but no it's not the same thing as merging.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. But in brief:
Current gets you the iPhoto Preview, used for sharing via media browsers. It's a jpg, medium quality missing metadata. Original gets the file you imported, unchanged and then you can export different version of the current version at different qualities. If you choose to export anything except the Original you do not get a Raw. There's no such thing as an "edited Raw", and you lose the connection between the original and the exported version. That means you've taken a non-destructive workflow and turned it into a destructive one.
The Tiff will certainly be higher qulaity and less likely to suffer generational loss in future editing but the file sizes are vast, often more than 10 times the size of the jpeg.
Put it this way, it would be cheaper to buy Library Manager than the disk you'll need to contain all the Tiffs. Unless you plan on a lot of editing, I'd go for a high quality jpeg as a reasonable compromise.
To be clear:
So, I guess my new question is, how can I edit the Raw image and keep it in a RAW format that IPhoto recognizes so that I can reprocess without any loss at a future time, or is it that once you edit a RAW image, then it is no longer a RAW image?
Once you edit a Raw it can no longer be a Raw. End of.

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

Have you seen this article yet?
iPod won't turn on
B-rock

Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

I need a special tool just to access my own photos?
I suggested "Find any File" because it is easier to use than the Finder's search - the results there will depend, on what you have included in your Spotlight index.
To search using the Finder, open a Finder window; press the key combination ⌘F, and then set the search window to search "This Mac" and "Kind is 'Photo Library'"
Only, if the library should have become corrupted, this may not work. And the search will not look inside the packages.
The whole iPhoto library directory is only 556 MB so I guess the videos are lost for good.
How is the "Importing > Copy items to the iPhoto Library" flag set? See my last post.
If you imported with "store files" in there original location, the photos and videos will have remained on the card, until the crad has been erased.
Is there a way to start iPhoto from scratch so at least I can start over and have it not destory all my data next time?
You can create a new iphoto library, by using the command "File > Switch to Library > Create New".
Is there way to import my photos and videos without using iPhoto?
You can use the utility "Image Capture", that comes with every Mac to import your photos to folders on your Mac.
This program is horrendous!
I never had problems with it and like it, but I understand ....

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

HT4061 i bought an iphone 3g for cheep and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ?? , please anyone that could help me out

i bought an iphone 3g but not in a shop and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ?? , please anyone that could help me out

Generally, that means the phone has been jailbroken (hacked). You can try restoring it as new using iTunes. Beyond that, there's really nothing we can advise as jailbroken phones can't be supported on these forums.
See also Lawrence's post in this thread:
https://discussions.apple.com/thread/5186252?tstart=0
Best of luck.

Toshiba Sattelitte L550D, AMD dual core processor M520, Firefox 3.6 works fine; any later version produces only server not fond for any URL; any one have a fix?

Forgot to mention op system is Windows 7 64 bit; 4 gig memory and a 320 gig 5400 rpm (slow) SATA drive. Have tried Pale Moon with the same result although its site shows the AMD Turion II dual core processor as supported

Yes, the question was poster from my desktop machine which is set to dual boot both windows 7 and Xp. I regularly run spybot scans but I'll try all the others you mentioned.
Thanks

I have an iPhone 4S. Up until recently, the wi fi has worked fine, but about a week ago its been either really spotty or not working at all.

Hey guys,
This is my very first iphone.. ive had it since Febuary of this year (2013) Wi fi has worked perfectly up until about a week ago, around the 4th of July.
SO basically whats going on is i dont have internet at my house, but my mother in law does, so she bought a range extender and we have it plugged into our wall. We literally live 50 feet apart, and it has always worked fine no problems full wi fi bars at all times. So last week down here where i live in TN it rained and rained for like ^ days straight and the internet was a little spotty. So, my sister in law fixed the internet and rebooted it or whatever at her house and my laptop works fine, full bars, but my iphone goes between have one wi fi bar to being completely gone back to 4G. I have tried to just restarting the phone, no help, tried unplugging my range extender and back in, no help, tried restarting the network settings, and then "forgetting this network" and added it back and anytime i walk through my house the wi fi gets lower and lower until its dropped completely, when it didnt use to do that. I dont know what to do!! its stressing me out!!! And lastmonth i changed my data to 300MB when i use to have 3GB so i wouldnt have to worry about it but my bill was pretty expensive, so i changed it . Like i said, this is my very first iphone and apple product so i really dont know much about how to fix things... thanks guys for your time im sorry this is such a long question

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

I recently purchased season 5 of Downton Abbey. I have downloaded episode 1. It will play on my iPad but won't play on Apple TV. Other movies I have purchased work fine on Apple TV. Any suggestions as to what the problem may be?

I Purchased season 5 of Downton Abbey and have downloaded episode 1. It will play on my iPad but will not play on Apple TV. Other movies and videos work fine. Any suggestions as to what the problem might be?

OOur internet service is not always fast enough to stream directly on Apple TV which is why we want to use AirPlay from the iPad to Apple TV. When we try to play a movie it starts for one second and then crashes out. This does not happen with every TV show - we watched 8 episodes of Season 4 with no problem, but it would not play episode 9 or episode 1 of season 5.

Hi, earlier I was using firefox 17 and it was working fine. Later when i upgraded to firefox 25 it became extremely slow, taking indefinite time to load a page

To solve this i have tried many things said in the forum like changing network.http.keep-alive.timeout to 0, removing and reinstalling firefox but nothing seems to work out. Though chrome is working fine. few days back post installation of firefox 25, i scanned my computer with spyhunter and regcure pro and i dont know why, it seems to have worsen the case. Please help

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I have NAS200 working fine. Of late I found that its performance going down

Similar Messages

Maybe you are looking for