I have no audio in the time line?

i have no audio in the time line ,since i have mavrericks?

When you play the clip in the event browser, does it have audio?
If it the clip has audio there, you may have by accident selected "Video only" in Edit->Source Media. Set it to "All" and you should be fine.

Similar Messages

I can not slide audio in the time line - or rather, I can't slide every clip.

Clips that are from video files are no problem. Clips from mp3 files dont move.

Convert the mp3s to wavs and then import.

How to reclaim spare space back at the end of my clips on the time line

When I have edited stuff on the time line I find that through moving clips around that I have an empty space after my collection of clips that I have arranged. How do I reclaim that empty space back so that where my clips end so does the time line.
I have tried saving the project and reopening it but this does not seem to do anything as I still have the space left.
Any help would be gratefully received Thanx ahead of time.

Control click on the empty space and, on the drop down menu, click on Convert Empty Space to Clip. Then, delete the clip you just created.
If the empty space is at the end of your movie, you can do the same as above. But, if your playhead still continues moving past the end of the movie, then expand your time line as wide as possible and check down your time line for little bits of clips left over from editing, and delete those. Any audio that extends past your video clips at the end of the movie should be trimmed back as well, even if you have muted them.

Panasonic TM700 1080/50p no audio track in time line

Hi Guys
I have PP CS5 5.0.3 and a Panasonic TM700 in 1080/50P mode, audio tracks are playable in the sequence monitor and when I edit a clip and drop it into the time line there is no audio in the time line at all. I have set up a custom preset in desktop mode and set it to 1080 50 progressive and to 5.1 sound. etc and saved it as TM700 preset.
This has been frustrating me no end as you can apparently edit these files natively in PP CS5
thanks

Hi
Have you tried dragging some footage onto the new item folder (next to the dustbin) in the project panel to create a new sequence?
This will setup a new seqence with the sound track that the clip is using.
A good place to start.
I have the TM700 and use it with CS5 PP all the time @1080/50p
Gary

No audio in source monitor but it works on the time line

Hi
I just started to use a Canon XF300 and I have noticed that when I double click on a file and it opens in the source monitor the video plays but I get no audio. If I drop that same clip onto the time line I get video and audio.
Is there a setting I am missing?
Thanks
Dennis

Hi
Yes both Channel 1 and 2.
Also I just came across another funny thing. After opening the first clip in the source monitor I can not open any other clips unless I open them from the time line. Double click a clip in the time line so it opens in the source monitor and then THE SOUND WORKS! Weird.
Dennis

When I drag the imported video files to the time-line it only recognizes audio - would anyone know why?

This happened 2 days ago. Before everything was working normal. Since yesterday each time I import a video and drag it to the time line, it only allows me the drag the audio portion of the file. Even those files which I uploaded several days earlier and
worked perfectly fine - now even those files are only showing audio when dragged to the timeline. I hope I didn't make my question too confusing.
I have adobe premier PRO CC 2014 and I bought it vie creative cloud.
Would anyone know why is this happening all of the sudden?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Getting the audio back on a video clip in the time line

hi all,
and happy new year!
have deleted the audio from a video clip in the time line and now want it back, how would I get the audio back?
thanks for your time
jonyfoz

Put the playhead at the beginning of the clip and press the X key. It should mark in and out point for the clip. Press the F key to match frame back to the same clip. Make sure both video and audio target tracks are set correctly and press F0 to overwrite and edit the clip with audio back into the timeline.

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

I have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

Can someone please help asap! just bought fce 4 and tried uploading some footage from canon 7d and when in the time line there is audio but txt saying "unrendered" knew to programme help would be much appreciated.

and when in the time line there is audio but txt saying "unrendered", new to this programme and any help would be much appreciated.

Any time Final Cut Express must perform more calculations than your computer can handle in real time, you need to render. Rendering is the process of creating temporary video and audio render files for segments of your sequence that Final Cut Express cannot play in real time. When you render a segment of your sequence, Final Cut Express substitutes a render file for the segment during playback. Render status bars above the ruler in the Timeline indicate which sections can play back in real time and which segments require rendering. To render just click on the sequence menu and select render selection then click both.

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

I want to change the time line in Audition CS6 to display a 24hr time

I have a file I need to aline to a particular time in a 24hr time format. I can see that I can change it many ways to do with music and video but I use Audition for a different purpose. I need to set the time line to display something similar to a 24hr clock so I can edit a file. Is this possbile?

Ryan, the decimal format in Audition reads mm:ss.ddd where I need it to read hh:mm:ss:ms - and with a repeating 24hr period. Adobe is aware that it's products are used for more than editing design, film and music...it would be nice for them to have something more suitable.
My solution it to upload the audio file into Premier, add markers where the relevant times are (after calculating the times to a straight time line) and then export to Audition. It's a lot of work for a large number of files.
If the time line was more adaptable it would have saved me hours of extra work!
Thanks for your help anyway.

Issues with play back in the time line

I am having issues with play back in the time line.
am working with footage captured off a DVCAM Tape in a DV/DVCPRO NTSC Time line.
My settings are set to match the source footage so I dont have to render. What ends up happening is the footage at times plays fine and smooth and then out of no where it will start playing choppy. like its lagging. But the Audio stay fine. I use to have to problem before but then it stopped.
Now its back and I can not figure out why it does this. Usually a restart of the system would help solve it but now it still keeps coming back.
i have tried different settings in the RT menu and still seem to be having the same problem.
i am running the footage of 3 1TB drives in Raid0 and the System has 16GB of Ram. So I dont see this being the issue.
any ideas?

of course not, the system boots from a 320GB Western Digital Hard Drive. (the one that came with the system)
I have a feeling that its not the Hard Drive, but no idea what it could be.

Red line above the time line

How do I get it so after initially importing my video the line above the time line will be green instead of red. It stays red until after I render the whole clip. I am importing my video clips from my camcorder. How do you determine the correct project settings if that is the issue?
Thanks

freedog69
How do I get it so after initially importing my video the line above the
time line will be green instead of red.
Not possible as worded. If you have the correct project preset, there will
be no colored line over this Timeline content.
If you do not have the correct project preset, there will be a red line
over this Timeline content.
What version of Premiere Elements are you using and on what computer
operating system is it running? APE 8 Windows XP 3GB of ram Pentium Dual core
Proc 2.41 Ghz
If you are talking "red" line, then you must be working with a version of
Premiere Elements earlier than 11. Assuming that....
If your project preset matches the properties of your source media, then,
when you bring one of those files to the Timeline, you will get no colored
line over the Timeline. But, after that, after you edit that content, a red
line will appear. That is when you render the Timeline content to turn the
line green.Thereafter, that original content will never revert to the no
colored line status as you work through editing that project. It will just go
through the red green color indicator system.
No colored line and green = the program telling you that you now have the
best possible preview of the Timeline content when viewing it in the Edit
Mode monitor playback. Red line = the program telling you that you do not
have the best possible preview of the Timeline content and, if you want that,
then you can press the Enter key of the computer main keyboard to make that
happen.
What are the properites of your source media... Canon HF 10 camera and
Panasonic HV-720
video and audio compression
frame size
frame size
interlaced or progressive
file extension
pixel aspect ratio
General Panasonic HV-720
ID                                : 1 (0x1)
Complete name                     : K:\Busters_Tap\New
Matches-CamB\f0069412.m2ts
Format                            : BDAV
Format/Info                       : Blu-ray Video
File size                         : 2.00 GiB
Duration                          : 58mn 59s
Overall bit rate                  : 4 854 Kbps
Maximum Overall bit rate         : 18.0 Mbps
Video
ID                                : 4113 (0x1011)
Menu ID                           : 1 (0x1)
Format                            : AVC
Format/Info                       : Advanced Video Codec
Format profile                    : [email protected] (mailto:[email protected])
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Format settings, GOP             : M=1, N=30
Codec ID                          : 27
Duration                          : 58mn 59s
Bit rate mode                     : Variable
Bit rate                          : 4 267 Kbps
Maximum bit rate                  : 16.8 Mbps
Width                             : 1 920 pixels
Height                            : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                        : 29.970 fps
Color space                       : YUV
Chroma subsampling                : 4:2:0
Bit depth                         : 8 bits
Scan type                         : Interlaced
Scan order                        : Top Field First
Bits/(Pixel*Frame)                : 0.069
Stream size                       : 1.76 GiB (88%)
Audio
ID                                : 4352 (0x1100)
Menu ID                           : 1 (0x1)
Format                            : AC-3
Format/Info                       : Audio Coding 3
Mode extension                    : CM (complete main)
Codec ID                          : 129
Duration                          : 58mn 59s
Bit rate mode                     : Constant
Bit rate                          : 384 Kbps
Channel(s)                        : 2 channels
Channel positions                 : Front: L R
Sampling rate                     : 48.0 KHz
Bit depth                         : 16 bits
Compression mode                  : Lossy
Delay relative to video          : -558ms
Stream size                       : 162 MiB (8%)
Text
ID                                : 4608 (0x1200)
Menu ID                           : 1 (0x1)
Format                            : PGS
Codec ID                          : 144
Duration                          : 58mn 58s
Delay relative to video          : 34ms
General- Canon HF 10
ID                                : 0 (0x0)
Complete name                     : K:\Busters_Tap\New Matches
CAM-A\00001.MTS
Format                            : BDAV
Format/Info                       : Blu-ray Video
File size                         : 1.90 GiB
Duration                          : 49mn 5s
Overall bit rate                  : 5 551 Kbps
Maximum Overall bit rate         : 13.7 Mbps
Video
ID                                : 4113 (0x1011)
Menu ID                           : 1 (0x1)
Format                            : AVC
Format/Info                       : Advanced Video Codec
Format profile                    : [email protected] (mailto:[email protected])
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Codec ID                          : 27
Duration                          : 49mn 5s
Bit rate mode                     : Variable
Bit rate                          : 5 066 Kbps
Maximum bit rate                  : 12.0 Mbps
Width                             : 1 440 pixels
Height                            : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                        : 29.970 fps
Color space                       : YUV
Chroma subsampling                : 4:2:0
Bit depth                         : 8 bits
Scan type                         : Interlaced
Scan order                        : Top Field First
Bits/(Pixel*Frame)                : 0.109
Stream size                       : 1.74 GiB (91%)
Audio
ID                                : 4352 (0x1100)
Menu ID                           : 1 (0x1)
Format                            : AC-3
Format/Info                       : Audio Coding 3
Mode extension                    : CM (complete main)
Codec ID                          : 129
Duration                          : 49mn 5s
Bit rate mode                     : Constant
Bit rate                          : 256 Kbps
Channel(s)                        : 2 channels
Channel positions                 : Front: L R
Sampling rate                     : 48.0 KHz
Bit depth                         : 16 bits
Compression mode                  : Lossy
Delay relative to video          : -66ms
Stream size                       : 89.9 MiB (5%)
What brand/model/settings camera provided you will the source media for the
Premiere Elements 10 project. Canon HF 10 and Panasonic HV-720
In a message dated 1/9/2014 5:00:15 P.M. Eastern Standard Time,
[email protected] writes:
Re: Red line above the time line
created by A.T. Romano (http://forums.adobe.com/people/A.T.+Romano) in
Premiere Elements - View the full discussion
(http://forums.adobe.com/message/5998225#5998225)

I have no audio in the time line?

Similar Messages

Maybe you are looking for