I have no interface
My problem is that there is no icon or menu in my interface, i have take an screenshot and you can see what the error is. Multisim workspace and Ultiboard has been working fine untill it crashes and i got an error message saying that Ultiboard stopped working and suddenly everything closed down. There is a ling to the screenshoot I have repaired the installation and also uninstall and install againg.
Hi,
Try this for me. Close Ultiboard (make sure it is not open), and delete the configuration file (config) for Ultiboard. To find the file (if you didn't move this file at any point in time), you need to follow this path:
C:\Documents and Settings\***your user name***\Application Data\National Instruments\Circuit Design Suite\***version***\config\.
So go to your C drive, then documents and settings, then to the folder with your username on it, then application data, etc, etc, until you reach the config folder. Delete everything in there and open ultiboard.
best of luck,
Miguel V
National Instruments
Similar Messages
-
Can we have abstract interface
can we have abstract interface if so wats the significance of it?
plz give me an examplepublic abstract interface AbstractInterface {
}The compiler allows it, so you can have them. But as said it's redundant and discouraged. -
Can we have the interface between microsoft excel and adobe illustrator
Can we have the interface between microsoft excel and adobe illustrator?
Feature Request/Bug Report Form
That aside, have you actually already explored variables or the graph tools?
Mylenium -
I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Don everything C&W suggest
OK I just transitioned to MacMail, iCal, and Mac address book. Goodbye Outlook, It was great for 18 years and painful for the last year. Microsoft is losing share with subpar software development.
-
Hello my friend just bought an iphone 5 and he is able to imessage me but I can't imessage him with my iPhone 4S, when ever I try it only sends a text message and I Checked and we both have wifi/ service and both have osi7 interface?
I think your problem is the fact that your friend is not registered through iMessage, just text messages. I would look around and check out how to set up iMessage on iPhones.
-
I don't have Operator Interfaces with TS3.0 Installation
HI,
After the Installation of TS 3.0 I don't have a NI directory under \TestStand\OperatorInterfaces. I do have a User directory with some of my own interfaces.
How can I install them?
I found on the installation disk: \componnents\operatorInterfaces\OIPart.msi. I executed it, It made an installation, but still I can't see the desired directory.
Please help!
Thanks
RafiRafi -
TestStand as well as other NI products try to be very careful and only uninstall the files that were created by the installer and not any files that are created by the end-user after installation. Even though you would like some or manu of these to be removed, many customers do not like non-original files to be removed. For example, any files in the User directories or the Cfg directories should be left alone. I know that some of the TestStand installers before 3.0 incorrectly remove the \OperatorInterfaces\User directory.
Your only option is to just manually delete the contents under the installation directory if that is what you want to occur.
Scott Richardson (NI)
Scott Richardson
National Instruments -
Using latest Premiere Pro, opened older version, now all projects have older interface
I have been using the latest version of Premiere. I recently opened a project that was using an older version of Premiere (CS5 perhaps). Now when I open any new projects using that latest version of Premiere, it shows in the older version interface. Does this now mean I have the older version of Premiere Pro or is it showings the interface, yet I still have the latest version? I did not do any thing overt by updating or re-installing, just opening an older version of a project.
-Carl AlvarezReset or choose a different workspace.
-
I have my interface connected to my ex hard drive then to my computer.
so it turns out the new macbook pros do not come with a fire wire 400 port. didn't notice until i brought it home and tried to connect my interface. ha, well i figured i could go through my ex hard drive then from my ex hard drive into my macbook through fire wire 800. You see i have a firewire interface and a fire wire hard drive so i guess what i did is called chaining them together.it worked fine. but then it stopped working. i think it stopped working when my ex hard drive went to sleep but im not sure? this is the only way i can think of having my fire wire interface and my fire wire hard drive connect at the same time. c i need the ex to save my audio files and my interface to use my monitors. i cant figure this out. any help would be great. hope this doesn't read to confusing..
Use iTunes as described in these articles:
Overview of syncing iPhone, iPad or iPod touch with your computer: http://support.apple.com/kb/HT1386
Synching Applications from the App Store: http://support.apple.com/kb/HT1977
Also look at Chapter 4 of the iPhone iOS4 User Guide -
Hi.
I created an application that drives a stepper following a certain rule every few minutes. The problem is I cannot stop the program before it finishes since the respective iteration still needs the delay to timeout.
I used two approaches, namely a "Wait" block and a Timeout included in a case structure. Either way, I had to wait for the time interval to pass in order to press the "Stop" button.
Is there an easy way to fire a periodic task (or alarm)?
Thanks.
Solved!
Go to Solution.Already tried it. I must have set the wrong paramaters because I never got it working. My stepper is suppose to finish doing its thing in max 15 secs. I suspect that I set the wrong interval in the block and mistakenly assumed that the secquence was never executed -> my mistake was that for testing purposes I set the Elapsed Time interval to 10-30 seconds to make the tests faster.
I'll post un update as soon as I'll test my code.
Thanks a lot. -
HT3155 Can we have Bilingual interface.
Some people like menus in both languages.
If you want something from Apple, best to use the channel they have set up for that:
http://www.apple.com/feedback/
I think the chances of ever getting what you want on a Apple product are very close to zero. If it is really important to you, best buy something that does have that feature. -
Does iPhone Safari now have black interface?
My new iPhone 4S with iOS5 launches Safari with a black interface (search bar at top and action bar at bottom). My boyfriend's new iPhone 4S launches Safari with the regular gray interface. We never made any modifications to either devices. Why is mine black and his gray?
Thanks! Now I remember turning private browsing on. Just didn't realize it had visual implications. The black is actually really shiny and pretty, too.
-
JList does NOT have editor interface?
Hi all
I have created an editable JTable - there was no problem to do it, I've just created my own TableCellEditor
I have also created an editable JTree - no problem, again
... now I try to create an editable JList, but it seems that there is not List editor, the JList.setCellEditor() method is aslo missing (JTree and JTable have such methods).
I don't believe that JList cannot be edited - do anybody now how to create an editable JList???
Many thanks
MisoI have used THE SEARCH BOX - can't find nothing about editable JList, there are only references for editable Trees and Tables.
Do anybody have concrete idea (the best would be some code), or should I reconcile myself with the JTable solution? -
Hi All,
I am facing the below error while installing Oracle RAC in Silent Mode.
SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
My /etc/hosts is given below.
127.0.0.1 localhost localhost.localdomain
#Public
192.168.1.101 rac1 rac1.localdomain
192.168.1.102 rac2 rac2.localdomain
#Private
192.168.2.101 rac1-priv rac1-priv.localdomain
192.168.2.102 rac2-priv rac2-priv.localdomain
#Virtual
192.168.1.103 rac1-vip rac1-vip.localdomain
192.168.1.104 rac2-vip rac2-vip.localdomain
#SCAN
192.168.1.105 rac-scan rac-scan.localdomain
Could you please help me to get rid of the error INS-40925....Any Idea...???Hi Ramesh,
Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
ifconfig -a in RAC1
[oracle@rac1 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:17:7A:D5
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25472 (24.8 KiB) TX bytes:3322 (3.2 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:C0:AC:DB
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:816 (816.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6394 (6.2 KiB) TX bytes:6394 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifconfig -a in RAC2
[oracle@rac2 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:C9:38:82
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:122 errors:0 dropped:0 overruns:0 frame:0
TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:32617 (31.8 KiB) TX bytes:5157 (5.0 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:90:B5:A0
inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:746 (746.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6390 (6.2 KiB) TX bytes:6390 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) -
Do Java interfaces have automatic reference counting?
I'm actually a Delphi developer trying to understand interfaces and I'm curious about the way Java implements them.
Here is a simple Delphi psuedo-code snippet:
var
// interface variable
Intf : IInterface;
// object reference variable
Car : TCar;
begin
// instantiate TCar
Car := TCar.Create;
// obtain IInterface interface for Car object
Intf := Car; // the reference count for Car is now 1
Intf :=Nil;
// After setting Intf to nil, the reference count is decreased to 0 and Car is automatically freed.
Car.Free; // EXCEPTION! Car was automatically freed because the only interface reference had a reference count of 0
What would happen in Java with the above code?
Does Java automatically reference count all objects with interfaces?
I know Java reference counts all objects in general so they are automatically destroyed, but I'm trying to understand the difference in interface implementation.
Thanks for any help!Thanks for the replies!
Sorry about my confusion with Java...
Does Java support interfaces? If so, can't you have a interface reference variable like I have in my Delphi code?
Also, if Java does support interfaces, do they have any other purposes aside from creating a list of functions/methods that can be used as a contract to interact with an object?
Interfaces seem really useful since you can have an IDriveable interface (for example), and any unrelated classes can implement it... (eg. TBoat class, TCar class, etc) even if the classes do not have a common ancestor class.
However, in Delphi interfaces also automatically reference count so once you create an interface reference you have to be very careful so the interface doesn't automatically free the object it is pointing to... -
Hi all,
I have doubts in interface . You please help me.
My question was
i have two interface. and also i have only one method in both interfaces.these method are same name in both interface
Now i implement these interfaces in my class it's work properly. it doesn't through exceptions.
But i have changed the return type of methods,
ie i put int for one
and void for another one.
it throws exceptions . duplicate method access.
how to i solve this problem? did u catch my point?
please help me Advance in thanks.i have two interface. and also i have only one
y one method in both interfaces.these method are same
name in both interface
Now i implement these interfaces in my class it's
work properly. it doesn't through exceptions.
But i have changed the return type of methods,
ie i put int for one
and void for another one.
it throws exceptions . duplicate method access.
how to i solve this problem? did u catch my point?Yes I caught it. The solution: don't do it. Methods differ by name and argument type list. Return values are not looked at.
Another solution: have the methods take different arguments. Or rename one of them.
Maybe you are looking for
-
Hi all, i gt problem to gt the value from the input field:STUDENT-OBJECT_ID, STUDENT-FILE_NAME into my sql statement. I using module. When i delcare a static value objectid = stud. My sql statement can regnoize. How can i gt the objectid base on my i
-
Any other methods to downgrade my iphone 5c ios 7.1.1
I want to downgrade my ios 7.1.1 iphone 5c to ios 7.0.6,but the "error 3194" appear on the itunes. I've checked my itunes version,its the latest! I also tried the tinyumbrella even the ifaith too! Is there any other methods to downgrade my iphone?
-
I bought a new ipad air but when i install the apps , all of them are gone , but i app store still are and says you can open it. But it can not open.
-
Cannot open HFM ( menu items greyed out) in workspace ( weblogic\IIS)
Hi, Following is the configuration: HFM on IIS on server1. Port 80 Planning on weblogic\IIS on server 2. Workspace on weblogic\IIS on server 3. Port 80. With this combination, I can see planning menu items in workspace and can create an application.
-
my i pad wont turn on its not dead or cracked i tried holding the lock and home button while it was charging like i saw online and nothing