I have no refresh button on my firefox toolbar and i don't think i have ever had one. How can I get it? I am really desperate for it.
I have never needed one to use it until yesterday. The message i had on the screen was "An error occured while getting the documents.Please refresh the page and try again" So i have no refresh button. I have tried View-toolbars-costumise and there is refresh icon there. Again i tried F5 and Ctrl + r nothing worked. I have 3.6 firefox. Thanks
Thanks to salgud, I learned that the partial circle arrow at the right of the URL (address box), & the left of the google box, is now the refresh icon.
Similar Messages
-
I tried to upgrade my ipad2 but was asked for a passcode. As I gave never set up a passcode how can I get past this?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
IPhoto Events has restored every photo I have ever deleted. How can I get rid of them?
I have been away from my Mac for 3 weeks and I log into iPhoto today to find that every Event has restored all my previously deleted photos - this means tens of thousands of photos in total and would take weeks to go though and delete again. Is there some way of deleting them? Thanks!
Restore from your back up.
-
i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?
korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced. -
My computer was refreshed and the technician did not deactive the CS3 license first and the drive has been wiped. I have my serial number, how can I get it activated?
Hi pipper88,
You can reinstall CS3 and enter the serial number to activate the software.
Regards,
Rave -
I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have lost my iphone, how can i get the IMEI number?
i have lost my iphone, how can i get the IMEI number?
If you need the IMEI for an insurance or police report:
how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US
But as Carolyn Samit said above, you cannot track the iPhone by IMEI. -
I don't have my iPhone but how can i get my contacts on my mac?
i don't have my iPhone but how can i get my contacts on my mac?
I suppose you have/had them on your iPhone, but do not have your iPhone with you now.
Did you ever sync the iPhone with iTunes, did you ever backed up the iPhone to iCloud? -
I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account
What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.
-
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it. Can anybody help?
The application iExplorer may be useful in your situation. Read these links below
I found this in another long discussion (on the ASC site) about this very same problem that you are having.
http://www.blog.gleff.com/2012/03/app-store-unable-to-purchase-fix/
This is the discussion.
https://discussions.apple.com/thread/3681763?start=45&tstart=0 -
I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install on my 24" Imac?
As long as you use your Apple ID to purchase it, I don't see why they wouldn't let you download the installer on one of their Macs and put it on a pocket drive.
Or, a friend with a high speed connection?
I agree with you about the delivery method, just trying to help you get what you want. -
After connnecting Iphone to iTunes ( while trying to delete U2's album that Apple forced on all iOS users. ), all of my songs have been removed. How can I get them back?
I dont use iTunes since I have a windows laptop. I use CopyTrans , a program that basically emulates iTunes but is simpler. However it wouldnt allow me to delete U2s album from my phone.
After removing one song iTunes "updated" my phone's song list but in reality just deleted every song on it ( except for U2's atrocious album !!)
Is there any way I can get my songs back?
When I start up iTunes and CopyTrans the songs are still there. However when I attempt to play them they will not play?
ThanksIf you have a unencrypted boot hard drive and willing to buy another external powered drive and $100 software, the files can be recovered using this method and Data Rescue.
Create a data recovery/undelete external boot drive -
I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?
Do you have the email & password of the old Apple ID?
-
old laptop hard drive went out.i have a new one how can i transfer my info to the new one?hard drive not working
If you don't have backups, see here
https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
How to enable javascript in windows server 2008 R2 enterprise ?
Hi all, Hope doing well, sir i am using windows server 2008 R2 enterprise operating system. i am running my web application in localhost. it's working fine. but i have used timer using javascript and some javascript function that is not working in th
-
Collective access to Allocation of BOM Items to operation in Routing
Hi, Experts My requirement is to generate a collective report that includes on a material what are the operations to be performed on which work center and component allocated to that operation. This is similar to as we go through CA03 than go through
-
Hi does anyone know how to take a string from a textfield and display the data of the textfield on another page. thanks in advance
-
Customize the look of the interface?
Is there anyway to customize the look of the interface in FCP? In other words- change the color of the timeline background, video tracks, audio tracks, etc. I recall Avid gave me that option and it seems like it would be something Apple would allow-
-
Can you make a collage in iphoto
can you make a collage in iphoto?