I have no sound on dv8000. Moved to Windows 7 64 bit. (error messaged;No media controller's)

I have no sound on dv8000. Moved to Windows 7 64 bit. Windows XP was on very shaky ground (error messaged-No multi media controller's). Also, need mass storage controller driver. Where can I obtain the compatible drivers. It would be nice if HP did not abandon some of their products as they did this one. Finally, can I add 2gigs DDR 333 (pc2700 2.5 cas) instead of the 512 megs I have now. I will be grateful for any help.~~~~Cuba T    

Don't blame HP....Conexant didn't develop 64 bit drivers for their audio chip.
If you want to run W7 on that model, it will have to be 32 bit.  Then you use the Vista 32 bit audio driver--probably have to manually install it too.
After you make the switch, install this card reader driver for the mass storage controller.
It will also work on W7 64 bit but without any audio, I don't see the point.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&sp...

Similar Messages

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Adobe 10, Windows 7 32 bit error message: You do not have priveledges to perform this command

    In Windows 7 32 bit system Adobe X, latest version, results in this error message:  You do not have privileges to perform this command.  Windows trouble shooter indicates that the program is not compatible with my system settings.  What needs to change?

    I don't see an answer for this question - but I'm experiencing the same error on a Windows 7 SP1 machine. I've tried all the suggested steps here (uninstalled, reinstalled, removed Adobe Reader folder). Even installed recent v11 hoping that would allow me to open a PDF as the original problem exhibited itself on a v10.1.4 installation. This is a brand new machine running local administrator user. Shouldn't be a rights issue yet Adobe reports that I don't have privileges to run (open) Adobe reader.
    I'd rather use the Adobe reader (rather than Foxit or another) but if I can't get it to install correctly I'm out of luck. Anyone get this issue resolved?
    BTW: Tried to insert a picture of the error message dialogue but the Adobe picture uploader for this forum doesn't appear to work either...
    Russ

  • How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds

    How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds it will only give me the option to choose wav?

    Windows 7 uses .wav (wave) files for the sound events. The default folder that Windows 7 uses to store the sound files in is located at C:\Windows\Media.
    You cannot use a MP3 file but there are lots of (WAV to MP3 converters) available on internet which can help you to convert MP3 to wav  serving your purpose of changing system sound. 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Error message: "The media can't be used because you don't have access privileges, or because it has no content or is corrupt."

    I get the error message "The media can’t be used because you don’t have access privileges, or because it has no content or is corrupt." when I drag photos (or copy and paste photos) from iPhoto to Pages/Word.
    It never used to do this and is really quite annoying, as I now have to find the file through finder to drag from there.
    I had to rebuild the iPhoto library a few days ago, is it something to do with this?
    Thanks in advance.

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, 
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • HT4623 my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1

    my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1

    Here's what that error means:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    This comes from this article:
    http://support.apple.com/kb/TS3694#error1

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

    I get the same kind of thing..
    I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
    here is the code:
    Process:         Soundtrack Pro [1705]
    Path:            /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
    Identifier:      com.apple.soundtrackpro
    Version:         3.0.1 (960)
    Build Info:      SoundtrackProProject-9600000~277
    Code Type:       X86 (Native)
    Parent Process:  launchd [140]
    Date/Time:       2011-10-18 13:12:05.201 +0200
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          195725 sec
    Crashes Since Last Report:           3
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      23728D81-590B-4C3A-8C67-1709945CD132
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
      Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      Reason: image not found
    Binary Images:
        0x1000 -   0x7f7ff8  com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
      0x947000 -   0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
      0x952000 -   0x98ffff  com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
      0x9a9000 -   0x9f5ffb  com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
      0xa18000 -   0xc3eff7  com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      0xd49000 -   0xd49fff  com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
      0xd4d000 -   0xd54fff  com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
      0xd5e000 -   0xd6dfff  com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
      0xd81000 -   0xd83fff  com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xd89000 -   0xe49fff  com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
    0x11000000 - 0x1102afeb  com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
    0x8fe88000 - 0x8feba9c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    0x90840000 - 0x90992fff  com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x90993000 - 0x90993ff2  com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91e60000 - 0x92036fe3  com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x924a8000 - 0x92509ffb  com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x93281000 - 0x9328ffff  com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93331000 - 0x93331fff  com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x93332000 - 0x93493ffb  com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x94326000 - 0x9436dfff  com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x94420000 - 0x946a5fe3  com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x97dd0000 - 0x98082ff7  com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x99d12000 - 0x99d76fff  com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x9adc8000 - 0x9adc8fff  com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x9aef1000 - 0x9aef1fff  com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9b2ec000 - 0x9b2ecfff  com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 3
    USB Device: USB to Serial-ATA bridge, 0x04fc  (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
    USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: UM-2G, 0x0582  (Roland Corporation), 0x0106, 0xfd140000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
    FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
    thanks everyone
    e

  • ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
    Can I log into 2 email accounts on my ipad where it says mail at bottom?
    Can I have 2 apple ids?
    If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
    (won't let me)
    If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

  • Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??

    Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
    Is a copy of the CFNetwork file available for download if mine is corrupted?
    Thanks

    get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

    Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

    Try deleting the iPod Photo Cache on your computer.
    http://support.apple.com/kb/ts1314

  • I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

    I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

    Welcome to the HP Forums Hinalover,
    I see by your post that you are having issues with the print spooler on the Windows 7 computers.
    I can help you with this issue.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
    Diagnose and repair Windows File and Folder Problems automatically.
    You can also run the System File Checker to repair corrupted or missing files.
    System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
    You might end up having to do a repair of Windows.
    Please let me know the results.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    Question
    Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Searching a string in a pdf blob

    Hi, My requirement is finding a string in a blob data. I am using dbms_lob.INSTR(FILE_DATA, utl_raw.cast_to_raw('Tag Switch'),1,1) > 0 approach. It is working properly for doc htm, text formats. But when we try to search in pdf blobs, it isn't workin

  • Adobe Presenter in Technical Communications Suite 5?

    Is Adobe Presenter 9 included in Technical Communications Suite 5? I just downloaded a trial version of Tech Comm Suite 5, but did not receive Adobe Presenter (only Adobe Presenter Video Creator).

  • Use of Pattern provide stranges results

    I want to match if a character is in a string definition (ie strchr in C (ex: strchr ("01234567809",number[0]) or strchr ("YN",answer)) see code below: Pattern p; Matcher m; p=Pattern.compile("\\d"); m=p.matcher("123"); System.out.println("m1="+m.fin

  • 3GS shutting down AFTER update to 4.1

    So I've been reading a lot of posts here about their 3GSs randomly shutting down running iOS 4... I haven't been having that issue at all, that is until 4.1 was released (which was supposed to have fixed that issue for others...). Ever since I upgrad

  • Pop-up Menu with numbers and letters

    When using a pop up menu i only have numbers in there e.g. $50. What i want to have in there is 3hrs instead of $50 because that's what will be relevant but the formula sees 3hrs as $50 so the spreadsheet still works. If i add letters eg $50 = 3hrs I