I have no sound on some of the apps I have on my I pad, I have sound on videos, music etc but not the apps.....any suggestion ?.

Can any one help??. I have no sound on apps....

Try this:
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Similar Messages

I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too.

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
Please advise.
Thanks,
Bob

Copy the entire /Music/iTunes/ folder from old computer to new computer.
See this -> http://support.apple.com/kb/HT4527

HT4623 I have an iPhone 4. I recently updated it. It loading all my iTunes music purchases but not the music I had on my computer and had on my phone. Gone. I have tried re-sycing. Tried all I know to do. It says "it cannot locate my music" do I want to s

I have an iPhone 4. I recently updated. It loaded all my iTunes music purchases but not the music I had on my computer. This music was on my iPhone before I updated. I have tried re-sycing but not getting anywhere. Says it cannot locate my music files but I see it on my lap top but cannot play it or get it on my iPhone. Can anyone walk me through this?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

Why do you need InDesign CS (that is version 3) or InDesign CS3 (that is Version 5) to install InDesign CS5.5 (it is version 7.5)?
If it is an upgrade and asks you to input your serial of an older version, you have to get an find it. No one will help you here. If you can't find it and if you have not registered it, you are out of luck. You will have to spend money for a new version.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

Itunes synchronises my music files, but not the apps.

About a week ago I bought an Ipod touch. My computer recognises the Ipod and synchronises the music files on Itunes, but not the apps.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that didn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter the Wi-Fi password.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
No data is lost due to a reset.

I am trying to play a MP4 video on quicktime on my PC and the video comes up, but not the audio

I have a MP4 video I am trying to watch on Quicktime and the video plays, but not the audio. Is there a certain Plug-in that I need? I have a new PC with Windows 7 professional Operating system.
Please advise

Hello bgreenberg727,
We've an article that can help get audio functioning correctly in QuickTime.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Cheers,
Allen

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

My ical will synch to my iphone, but not the reverse. Whats up with that?, My ical will synch to my iphone, but not the reverse. Whats up with that?

My ical will synch to my iphone, but not the reverse. Whats up with that?

An iPod can only sync with one iTunes library. The iPod sees the rebuilt computer as a new iTunes library. To make this computer the syncing computer
- Transfer iTunes purchases:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
newer copy
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the iPod backup that iTunes makes does not include synced media like apps and music.

HT1600 Cannot get air play mirror option. Updated Apple TV and have air play option, but not mirror. Any suggestions?

Cannot get AirPlay Mirror option to work on my Iphone. Updated Apple TV and IPhone. I only see the airplay app button, but not the mirror on/off toggle. Any suggestions?

AirPlay: iOS and Mac

I just had to have my toshiba laptop hard drive replaced and I am unable to move my itunes library from my ipad back to the laptop. It says it is linked to another library and I can only transfer purchased music etc and not the rest of the library.Help!

I have just had my Toshiba laptop hard drive replaced. This has resulted in all previous content held on the laptop to be lost. I wanted to try and transfer my music library from my ipad to the laptop, but it will not allow me to do so. The message is that the ipad is linked to another computer and it will only allow the transfer of the items purchased on through the ipad and nothing else. Does anyone know if the full library can be transferred back to the computer?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

I have no sound on some of the apps I have on my I pad, I have sound on videos, music etc but not the apps.....any suggestion ?.

Similar Messages

Maybe you are looking for