I have no sound on the iPad. What happened?
I think I have tried everything! No sound on the iPad. I have tried resetting it. I have double tapped the home button to get to the sound bar. I think I've checked everything! Please help me!!!
Could you have muted it? THere's a little switch by the volume toggle that can serve as either rotation lock or 'all mute'. If you have it set as all mute (you can do this in setting/general) then if you flip that switch it totally silences your iPad.
Similar Messages
-
Sometimes an app goes mute, and it is not something about the volume, it just doesn´t have any sound any more. What should I do?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?
You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums. -
I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again…still nothing.
Try closing iTunes and reset your iPad. After the iPad starts up, try the download again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iTunes app then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
i buy new ipad but the garranty in my country don't support it,, and now i have a problem in the device,,, what is the solution?
Take it yourself or send it to friend in country where guarantee supports it.
Do not try to ship it to Apple - they will not accept international
shipments nor will they return it to you.
What is the problem? Maybe someone here can offer some advice to solve
the problem. -
hey i have an ipod touch 5gen ,it has stopped responding and is showing a blank black screen.when ever i connect it to itunes it gives a sound of the connection. what am i suppose to do?(ios7)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I keep getting this message " the maximum number of free accounts have been activated on this iPad " what does that mean and how can I fix it
It's a really bad idea to post your iPhone's serial number and I've asked the Hosts to remove it.
Any one device can create only three iCloud accounts. As you have apparently already created three accounts (or if it's a used phone the previous owner did) you cannot create any more one it. This is tied to the hardware, not the account, and there is no way round it.
You can create a new iCloud account on another iOS device or on a Mac, and then you will be able to sign into that on your iPhone. -
PLEASE I USED FING MY IPHONE TO ERASE MY IPAD AFTER I HAVE MISPLACED MY IPAD PLEASE NOW I FOUND THE IPAD WHAT WILL I DO TO RESTORE IT BACK?
http://support.apple.com/kb/HT1766
-
I don't have celluar data on my Ipad. what app do I use? In the place on the Apple support screen there are, Airplane mode, Wifi and bluetooth.
Thank you in advance for your help because I don't want to take this back but if I can't figure out how to use it, I will have to.Henry ~ Welcome to the Support Communities.
Henrypublisher wrote:
I am connected to a very strong Wifi network but I still can't access anything online like my gmail account, Netflix, Safari or anything else.
Go HERE and see the section: "If you are unable to access the Internet while connected to a Wi-Fi network". -
How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! RegardsHi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
After embedding a quicktime video in Keynote, all I have is sound, no video. What am I missing?
Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though. -
My iphone5 does not have any sound from the speakers ringtones or music any suggestions?
my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix
Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc
-
I don't have any sound on my iPad.
I don't have any sound on my iPad.
See the reply that was left on your first post.
-
i have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8
Here you go:
You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
To quit the app store, simply hit these keys:
Than, you should come up with this window:
Select the app store with:
a) The up and down arrow keys
b) Your cursor
Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
Force Quit...
Maybe you are looking for
-
Starting a new album in iPhoto.
On my MacBook I can create a new iPhoto album using file/new or the icons bottom right of the iPhoto screen. But the problem is that the created new album copies all photos from the album above in the list. There is no instruction on how to create a
-
How do i tell iphoto [in faces] that i dont know a person or it isn't a face at all
how do i tell iphoto [in faces] that i dont know a person or it isn't a face at all? I'm using iphoto 11. Identifying all the faces in my pics. It keeps suggesting the same pics for lots of people. I dont know the people in these faces but I cant f
-
Access bean events data with axbridge ?
I build a bean and packaged with axbridge It works in c# but how can I get data from my Events ? I defined a listener in my bean public interface TestChangedListener extends EventListener{ void testChanged(TestChangedEvent e); and in c# the meth
-
Include java function in XSL!?
Does anyone know how I can include a java function in a XSL file? Thanks in advance C�dric
-
How to fully disable Journals in BPC
Once Journals are enabled in an app, how can they be disabled fully so new dimensions can be added? I already changed the flag in the tblApp table, but more is needed.