I have no sound on the right output of my mac
Hello,
Since yesterday I when I plug in my headphones, speakers... there is no sound on the right side.
I have already checked if there is something in my audio jack, the balance, audio midi setup and resetted the PRAM and NVRAM.
Please can anyone help me
Love always,
Victor
Plug in the headphone.
System Preferences > Sound > Output
Select headphone and adjust balance.
Similar Messages
-
I have a discolored strip the right side of my mac book screen
I HAVE A DISCOLORED STRIP ON THE RIGHT Side OF MY MAC BOOK SCREEN
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
Audio out jack only plays sound in the right speaker.
Whenever I plug anything (speakers, earphones, etc.) into the Audio Output jack, it only plays sound through the right speaker/earphone. The left speaker/earphone hardly has any sound at all.
How should I go about fixing this problem?
It ***** and it's annoying. At first, I thought it was just my earphones but they work perfectly fine with my iPod and other devices.HI Chris,
my daughter has the ipod touch 4th generation and it started only having sound come out of the right speakers in both of my vehicles. I read also it could be a broken socket causing it. Do you know about this? How does one break a socket and how would I repair that? The person on y*hoo answers said to either send it to apple refurbished unit or replace it. Replace it? Really? It's a 64 GB ipod touch that I won at work with reward points which is the only reason I could afford it. Looking for better solution like your's above but I'm worried I will have to send it in. I was looking on my iphone 4 and noticed the volume balance was under Settings>General>Accessibility so I guess it's different on an ipod touch? -
Is AIR the right output to use?
Hello there.
So, let me preface this by saying I don't know a lot about using AIR to view help content nor the limitations an AIR output has. I've built a test file once and played around with it some back in RH 7.
Until now our company has used HtmlHelp (CHM) as our output format, but we're starting a new product, and we need it to have a modern look and feel as well as have the ability to store, display and moderate user comments on topics. Initially, I'm thinking the RoboHelp AIR output might be a good match.
What we need:
The help must be context sentive.
The help must be dockable inside the UI.
The help must allow user commenting (similar to that shown in the AIR examples).
The help must reside locally but have the ability to grab user comments for any who have access to the internet.
One possible problem is our product will have its user interface done using WPF. My first concern is can a WPF user interface support F1 context sensitivty in an AIR output? Some posts say perhaps it cannot (such as http://forums.adobe.com/message/2145088).
Also, can you dock an AIR output inside a UI?
If AIR isn't the right output, what would you recommend for the above requirements?
Hope all this makes sense. This is all new to me.
Many thanks!
(RoboHelp 9, Windows 7 64-bit)Thanks for the answers guys.
I don't see C# as a supported language here, so maybe that won't work for us then:
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\CSH API
We do already have RH 9.
We do not have the RH 9 Server. Is this needed for the user comments from the internet? From this help topic, it sounds like you might be able to do it some other way.
From the Rh 9 help:
Set Location For Comments And Topic Ratings
Depending on whether you want a trust-based system or user authentication, select one of the following options:
Select Network Folder. Click Browse to choose the shared network folder where the comments will be stored. Click Add to add locations on Mac and Linux systems if required. See URL formats for Windows, Mac, and Linux.
Specify the password that moderators need to provide to access the moderation dashboard.
Select Pending or Accepted to specify how you want to handle unmoderated comments. If you select Pending, unmoderated comments are not displayed to users.
Storing comments in a shared network folder is suitable in trust-based work environments, where shared reviews by internal stakeholders are part of the content development process.
Select RoboHelp Server and
specify the server URL.
Storing comments on RoboHelp Server enables you to authenticate users before allowing them to view or post comments.
Configuration File Path
Specify the path and name of the file that stores the configuration for comment syncing and auto-update. When the AIR application is distributed, users can copy the default configuration file from the !SSL folder of the project to the location specified in the configuration file path and modify the default settings according to their preferences. For example, they can disable commenting or change the location of storing comments.You can enter the path in any of the following formats:
A relative path (relative to the install folder)
An absolute location, such as a shared network drive or a file location in the user drive
A web URL pointing to the location where you’ve posted the XML file
Thanks for the help. -
I have had this problem before. I just cant remember how I fixed it. I am not getting any sound from the HDMI output. Everything is selected properly and volumes are set correctly. Last time I had to change a megahrz thing and thats where I am stumped.
Mac HD/Applications/Utiltiies/Audio MIDI Setup
441000 or 48000 Hz for Format -
Suddenly I don't have any sound and the mute is not on
I have checked the systems preference under sound and the only output device that shows is internal speakers built in output. The mute is not on either the system as a whole and in iTunes. There is no voice, no music, no sound at all. I have rebooted several times. No headphones are plugged in and I unplugged everything from the USB ports. What else can I do? Thanks!
try resetting your Mac's PRAM and NVRAM
-
My external audio recording device only records to the right channel. How do I duplicate the sound in the right channel and run it to the left one in Final Cut to get full stereo sound?
I've already copied and pasted the right channel (A2) onto the left channel (A1) but that just doubled the volume on the right channel.
For instance, when I listen to my audio with headphones it only comes thru the right one. How do I make it so that it comes thru both headphones?Stereo is something else. It is a sound field where the individual elements are located through varying the amount of electrical energy for each element delivered to each channel.
What you have is a mono source that should be panned to center. This will equally divide the signal so it will be delivered out both the L & R channels.
Load the original clip to the VIEWER and set the PAN to 0 (zero). Delete any duplicates. They are unnecessary.
x -
Only getting sound out the right side speaker
Just this morning, I realised that I am only getting sound out the right side (built-in) speaker on my iMac 24 inch.
Any ideas as to why/how this is happening. It was working fine last night.
Do I have to take it in for repair??thanks- yes that was the answer!
god knows how i altered the setting. must have been a keyboard short-cut and i did it by mistake...! -
All of a sudden loud sound from the right
All of a sudden my macBook Pro is making a loud sound from the right which I think is the fan? It happens when I first turn it on so it is not too hot.
I'm concerned because my last ibook g4 had a dead hard drive in less than a year..this sound is somewhat similar to the clicking hard drive, but forgive my ignorance the hard drive is not on the right?
Is this a normal new sound? Does feel that way.
cursed with macs.MissWit,
Its the fan, you got two one in each side.
I have same problem, but mine often appears when the MBP is warm or let me say been running for a while, at the same time I feel vibrations when I touch the casing or maybe housing is a better word, well the aluminium cover...
I am 99.9% sure the hard drive is located to the left. -
Losing sound on the right channel or sound level is extremely low
This started happening when I got my 5. speaker system ( Logitech Z-5500 ) sometimes I would lose all sound from the right channel ( both front and rear and sometimes including center ) and sometimes the volume is at an extremely low level even if the sound card output is at 00% now fixing this is either a reboot or a change of audio mode Game to Ent ( vice versa ) Is creative working on a permanent fix for this one ? Im using X-Fi Extreme Music and Windows 7 64bit 8GB of ram
This started happening when I got my 5. speaker system ( Logitech Z-5500 ) sometimes I would lose all sound from the right channel ( both front and rear and sometimes including center ) and sometimes the volume is at an extremely low level even if the sound card output is at 00% now fixing this is either a reboot or a change of audio mode Game to Ent ( vice versa ) Is creative working on a permanent fix for this one ? Im using X-Fi Extreme Music and Windows 7 64bit 8GB of ram
-
The hinge makes a clicking sound at the right corner as i open and close the lid
I bought my Mac 2 weeks ago and The hinge makes a clicking sound at the right corner as i open and close the lid. Someone help me out Please
At the bottom of this page click
Then on the right side of the next page click
On the next page click
Select a topic
Select Other Topics then Hardware not working as expected
Finally, provide your contact information and Apple will call you! -
Text does not move to a new line, I have to scroll to the right???
In Safari and Firefox browsers when looking at some webpages the text is one long line and I have to scroll to the right to read everything. How do I restore the text so it goes down instead of across?
I searched for wrap text but could not find anything.
Thank YouHi M'Q', Welcome Back.
It seems to be site formatting. I get it all the time in these forums when someone posts a crash log. The lines don't wrap and spread it out sideways.
My WAG; we just have to live with it. :~( -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there. -
HT1349 My ipod say no volume available and therefore I have no sound thru the earphones
My ipod says no volume available and therefore I have no sound in the earphones or thru an aux cable.
- Have you tried a reset. Nothings will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do the speakers work?
- Have yo tried another pair of headphones?
Maybe you are looking for
-
How can I login to a website from LabVIEW, for example to Hotmail ?
I'd like to use the Data Socket Write VI to be able to give my loginname and my password from LabVIEW 6i. I really don't know how this VI works, and/or if this is possible. Thanks for your help.
-
When I downloaded Acrobat XI Pro, it appears that the CreatePDF feature was certified for the product, but not loaded. I was under the impression that it was a part of the download, and now need to load the plug-in. I am unaware as to how to obtain t
-
Can i use apple tv to make my mac a monitor
can i use apple tv to make my mac a monitor
-
Indian language - Gujarati OpenType font problem
Hi All, I have designed a Gujarati opentype font using Fontographer 4 on a macintosh machine, version 10.5.8, generated a TTF file of it and wrote the tables for that font using VOLT on a Windows machine. When I test the font in notepad, word on
-
Question about JAVA_XA in XE database
During initialization of application using Jboss, I turned on the sql trace and found below entry in the trace file. Does this means JAVA_XA package is available in XE database? I have seen in other threads saying that JAVA_XA is not available in XE.