I have no status bar, no menu bar, no maneuverability at all. There appears to be only the center of the webpage and I have to ctl-alt-del to close firefox. There must be a simple solution to correct this.
Problem began this am- opened firefox 4 and have lost all the manageability buttons-tabs-toolbars. It appears that all I have is the center of the page and the frames around the edge are out of sight or gone. Can't grab a corner/edge to make screen smaller or scroll up/down. Tried reloading and reinstalling FF4 but still same problem
I mucked about and solved the issue myself by uninstalling FF4 then installing FF3.16.... it still opened up wrong. I deleted something from Mozilla FF ( I had 3 sets of search engine folders) and then managed to get back online with FF instead of Chrome. Will keep your advice in mind should the problem occur again - I never run anything in full screen mode and dumb me does not even know how to do that with FF. Thanks for the answer.....
Similar Messages
-
Print does not seem to fit in any downlaoded webpage - please help
I'm not sure what you mean by downloaded.
* Is the problem with Firefox displaying the page on the screen, and part of the text is off the right side of the screen? If everything is gigantic, your Firefox icon might be set up to start in a low resolution. If only the page content is too big, it could be an issue with Zoom.
* Is the problem with printing the web page, either to paper or PDF? If you use Print Preview and adjust the scaling setting (e.g., change Shrink to fit to something like 90%), perhaps you can get it to work. There are some sites that do not Shrink to fit. -
I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.
bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR -
My system keeps shutting off unexpectedly after updating it to OS X 10.8.2 (12C60). is there anything that can be done to correct this?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?
Modular747 is a troll with very little real knowledge of the iPhone charging systems (as evidenced by his uninformed comments in other threads).
It could very well be iOS 7 refusing to charge from "non-authorized" accessories. We have done A/B tests with the same accessory (in this case cables) with iOS6 and iOS7 and have seen the cable work with iOS6, then not work (i.e. not charge) with iOS 7. Same device, same cable. Only change was the OS.
Keep the pressure on Apple, folks. It is not OK to make working accessories unusable with a software update. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
One of the e-mails in my ipad deletes messages automatically after reading without backup. What do I do to correct this so that my mails would remain in the inbox for reference purpose?
As you are on a residential service you have to wait for engineer availability priority is given to Business users as they get a different service level agreement also using a residential line for business use can leave you open for suspension or cancellation of service as it breach's the terms and conditions
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?
Chris Bui wrote:
Thank you Diavonex......... This is not a joke and please do respect when people really need help.
Diavonex was not treating this as a joke. He was giving you the answer to your question in a perfectly polite and respectful way. Without the Apple ID credentials to which the iPad is locked or proof that you are the original purchaser, there's nothing you can do. The device is useless to you. -
Hello Mac heads.! I just downloaded Onyx for tiger. All went well. But I try to launch onyx from my applications and it doesn't offer checking the S.M.A.R.T. status so I can check my disk. Everything else appears. Uninstall only, forums, website etc.
I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
Hi
I have just set up itunes match on my new imac. It is saying I can access all my 9000 songs but only the playlist tab is live - I can't access albums or songs. Am I missing something?
ThanksHi,
I do not understand your problem. iTunes Match does not change the way iTunes looks. When match process is complete, the match screen tells you how much music you have in the cloud.
Across the top of screen you have options to select songs, albums, artist, composers etc.
Suggest that from main menu, select view>show sidebar.
Jim -
Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!
Please help me back my clash of clans game. I cant access my games. But im steel can visit. Please hepl me.
-
i have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser
When you connect the iPhone to sync with the new computer, a number of things will happen. If the new computer/iTunes does not contain any music, then yes, you will receive a prompt saying this iPhone is synced to another library, and if you continue, you will lose your music. However, you risk losing a number of other things, such as apps, contacts and calendar data. When you ask about photos, any photos that you have on the iPhone that were synced from the previous computer would also be lost. You need to save the photo folder from the old laptop and transfer that to the new desktop. You also need to sync the contacts and calendar to the same supported application that you were using in the past, such as Outlook, unless you are using an outside web-based sync, such as Google. Also, when you first connect the iPhone, it will make a backup, or at least make sure that it does before you attempt to sync, or you will not have a backup of some of the other things, such as mail settings, SMS, and the contents of the Camera Roll. I would import the photos from the camera roll to the new computer before trying to do anything else in iTunes.
-
I want only the Illustrator and Photoshop. Is there a plan to buy for this?
I want only the Illustrator and Photoshop. Is there a plan to buy for this?
not specifically.
these are the currently available plans, Creative Cloud pricing and membership plans | Adobe Creative Cloud -
im playing rage of bahamut at the moment and every time i try to buy ragemedals it comes up with (please contact itunes support to compleate this transaction) i have checked my restrictions and that is fine, i can buy apps from itunes. please help
What was the response from iTunes after you contacted them like the message said to do?
Apple - Support - iTunes - Contact Us -
I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this? I stand by google 100% and if ur gonna make it where i can't use google as the URL's seach engine then i will uninstall it.
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Maybe you are looking for
-
Error when extracting data from Data Source
Hi All, I have a Generic datasource in BW which is based on a Function Module.When I am extracting the data from this source in RSA3 it is ending up in Run time error. the error message is The current ABAP program "SAPLYBWPU" had to be terminated bec
-
Image file formats gif, png, jpeg, tiff
Hi guys, I've read a little bit about this, so I know the some basics: gifs: lossless, transparency/animation, 256 colors jpeg: lossy, no transparency, 16 million colors, etc. png: lossless, 16 million colors (?), newer/better compression and transpa
-
Multiple undos in director 11.5 query
Director 11.5 is supposed to support multiple command 'undos' There is an option in the preferences to set the number of "undos" but regardless of what is specified I can't seem to "undo" more than one (ie the last) change - what is the trick to this
-
Error when exporting from Quicktime Pro
I don't really like how any of the Adobe products export H.264 .mov files so my normal workflow that I've been doing for years is to export as a high quality MPEG4 and then open it in Quicktime and export as H.264 from there. I went to do this today
-
Reformatting my soon-to-be-replaced Seagate HD..., Reformatting my soon-to-be-replaced Seagate HD...
Sadly, I received the email that my beloved iMac has a faulty HD. So off to the Apple store this week it goes, but hopefully without any sensitive information on it. What's the best route for reformatting my HD so that the least information stays on