I have no volume for incoming calls ,texts and emails how do i fix it

I have no volume alert for incoming calls ,texts and emails . How can I fix this as I can watch video clips wiyh sound

Hello Strangers1,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Learn more about troubleshooting iPhone hardware issues.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

Hi rsample,
Thank you for visiting Apple Support Communities.
Your symptoms make it sound like the iPhone side switch is set to silent mode.
iOS: Understanding sounds, ringtones, and alerts
Set your device to silent mode
iPhone: Toggle the Ring/Silent switch on the side of the device.
Best Regards,
Nubz

Games, incoming calls, texts and reminders don't play through the speaker

Have had my 4 a week and it's been perfect until today because none of the above play through my speaker, therefore I can't hear incoming calls, texts or reminders - or play games without wearing earphones. But when on a call, I can switch to speaker and it works - I just can't hear it ring.
All other apps play perfectly through the speaker as well as earphones, iPod, you tube, radio stations, etc.
Nothing's changed in the settings.
Have tried the usual; blowing into the jack hole and plugging/unplugging really quickly.
The fact that some things do play via the speaker tells me it mustn't be hardware related (and that the phone isn't confused about whether or not the earphones are plugged in).
Has anyone else had this? Is there a fix?
Am going to call CPW to at least notify them in case it has to be replaced. But if I was to do a factory reset, would I just have to sync everything back via iTunes and then set up my email etc?
Would a visit to an Apple bar be a good idea? Am based in SE England and both bars are 90 mins away.
Thanks
Message was edited by: sjp03uk
Message was edited by: sjp03uk

Doh - I never realised there was a mute switch! Everything now back to normal and all is good in the world again.
I'm sending you a virtual pint! Thanks.

IPhone 5 vibrates with incoming call, message, and email but there is no ring tones.

Recently had to replace my IPhone. Repaced the SIM card and backed up on ITunes. Everything works fine but I get no ring or sounds when receiving calls, messages, and emails, etc. Phone does vibrate. Speaker is working with music. Volume is turned on in settings.

Check the mute switch near the external volume controls. If orange is showing it is muted.

Adjusting volume for incoming calls - not the ringer

Just got a new 4S and although the "sounds" ringer is turned all the way up, I cannot hear people when they speak. Is there a separate setting for incoming sound?

Hello,
I would love to help you with this issue.
To change the volume of your caller's voice all you need to do is, when in a call, press the volume buttons. The top one to make it louder the bottom one to make it softer.
I hope this helps!
Regards,
Jake

Volume for incoming calls

When I call someone they sound very quiet. How or can I turn that up? Thanks

Hello,
I would love to help you with this issue.
To change the volume of your caller's voice all you need to do is, when in a call, press the volume buttons. The top one to make it louder the bottom one to make it softer.
I hope this helps!
Regards,
Jake

HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

i have incoming and text messaging to the maximum volume. How can i increase it?

If while you are in Messages and set the volume, that is all you can get. You can try and see if Volume Limit is checked by going to Settings>Music and see if Volume Limit is off.
The only other thing I can recommend, is to create your own ringtone/text tone in a music editor and increase the volume in the file. You may also want to check your speaker area and see that it is clean and not blocked by any debris.

How can I change the speaker and listening volume for incoming calls?

When I get calls, I'd rather have them be louder. When I use the speaker feature, same thing. Not loud enough. Help, and thanks!

You're a GOD! Thanks so much.

TS3567 Hi the volume of incoming call is very slow, how to fix it?

The volume of calls is very low, I am not able to hear other person voice

When you are on a call, then keep on pressing the increase volumne button which has been marked with '+' sign on the left side of your iPhone.
I hope this will work.

Handset losing call logs, texts and emails

Hi,
I have an ongoing problem with my BB and am not getting much sense from my network provider (BT Business).
Here's a bit off history:
I started the contract in November 2011 with a Torch 9860. I had numerous problems with the phone freezing and randomly losing data such as texts, call logs and emails. In 9 months I've had 5 phones and 1 sim card change, 2 weeks ago BT changed the handset to a Torch 9810.
The phone has worked fine till Friday when it started doing funny things like randomly receiving texts which were from old conversations. On saturday afternoon it lost all data by way of texts, call logs and emails that were over 24 hours old and in the last hour has lost everything over 6 hours old.
I have all calls, texts and emails going into the messages list and have that set to save everything for ever so I can chose when to delete information.
As I;m a consultant I need my call logs, texts and emails to work out my billing so this really is a pain.
I really do think this is a network issue rather than the handset.
Can anyone offer any ideas/solutions before I phone BT in the morning?
Many thanks x

That is a very tiny database size. Go into your camera options and see where your pictures are being saved.
Something is not right. There is no reason your free memory should be so low with such small database sizes and very few apps installed. You should be pushing 200+ MB of free memory.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer.

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on. I can hear tones when I go to change them. I can hear my music. I can hear talking on videos I have taken. I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
When I put it in speaker phone I can hear but not voices through the phone.

I have no volume for incoming calls ,texts and emails how do i fix it

Similar Messages

Maybe you are looking for