I have not used my ipod in several months, i have logged into my account on itunes but i still cannot get into my ipod. it still pops up the message that the ipod is dissabled and that i need to connect to itunes. well, i have. now what?
i broke my ipods charger a few months back. and since then i haveforgotten my ipods 4 didgit code and it became dissabled. i have connected to itunes and tried everything to get back into it. can anyone help me? totally appritiated.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
I am trying to download library books onto my Nook reader and keep receiving the message that the book isn't authorized to download. Have not downloaded a book in several months but haven't had this problem in the past. Help?
same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please
-
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
When I open iPhoto this appears- "Your photo library is either in use by another application or has become unreadable" I have not used iPhoto before on this computer. I downloaded iPhoto Library Manager as suggested but nothing happened. What should I do?
I think the usual advice is to use the Rebuild command in Library Manager.
Regards
TD -
um my iphone is disabled and says you need to connect to itunes. I have never ever connected to itunes on a computer as i only just got it so someone help me!!!!! can i still download itunes or what OMG help :o
Download iTunes: http://apple.com/itunes/download/
...and use it to restore your iPhone in Recovery Mode: http://support.apple.com/kb/HT1808 -
i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
Trying to download and install the latest version of itunes but at install i get"older version of Bonjour connot be removed" then asks me to contact tech support and download is stopped.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time? -
I have money on my iTunes account. I cannot purchase premiums for the games I play! Especially the Hobbit Middle Earth game. I get an error message saying there is a problem connecting to my iTunes account. I have changed my password and still cannot use the account. I purchase my iTunes and App cards at Food Lion and Walmart and don't use a credit card. Can anyone help?
Try loging out of and back into your AppleId: (Settings app > iTunes&App Stores > [tap on your account] > Sign out. Then sign back in.
Contact iTunes support: http://www.apple.com/support/itunes/contact/ -
Where is the link you were to send last week, l still cannot get into my account
You were supposed to send me an email link to enable me to get into my account
Hi ,
Welcome to the Community.
Have you checked your Spam/Junk folder to see if it ended up in there?
Thanks
James -
When I connect my iPad or iPhones the system responds by saying an update to iOS 7.1.2 is available. After trying about ten times on three different instruments, I get the same result -- a start, then failure at about 1/2 the way through (15-20 minutes).
Looks as though my cable provider's repairs to the system may be interfering with my signal. Since I am the only one reporting this problem, since I've never had it before, and since the cable company's repair trucks are in the area, maybe that's the problem.
-
I was in the general settings on my ipad a couple of days ago and when I signed out and wanted to come back on i could not get into my pad at all I have changed the id and password three times and i still cannot get into the pad. Is the general setting keeping me out? I put the passcode in and I still cannot gaet in, is the passcode my password if so why can I not get in?
Have you checked to make sure Accessibility features are turned off? See this article for more information.
http://support.apple.com/kb/HT4317
B-rock -
How do i get my ipod touch to work if i have not used it in a while
how do i get my ipod touch to work if i have not used it in a while. we have not used it in about 4 months and it does not charge or turn on
If you can connect the iPod to a computer you can restore using iTunes > Apple - Support - iPod touch - Restore Troubleshooting Assistant
-
I tried to update my phone to the IOS 7.06 and it messed up my phone and said i need to connect to itunes. Is there any way i can fix my phone without connection to itunes because i am out of town
You'll very likely need iTunes. But you might as well try a reset since you're out of town.
Hold the on/off and home buttons together for about 10 seconds. Hopefully you will see an Apple logo and then some progress. -
My ipad is disabled and says I need to connect to itunes. When I connect to itunes it says I need to enter a passcode on my ipad however there is no place to enter as passcode. The screen is locked.
You need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097 -
I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV. I connected it up to power and with an HDMI cable toTV. It attempts to set date and time and cannot. I cannot get the remote to interact with the box also. Could it be something as simple as needing a new battery?
Hi kybriar,
Thanks for using Apple Support Communities. This article has steps you can take to troubleshoot the remote itself:
Troubleshooting the Apple Remote
http://support.apple.com/kb/ht1722
For the issue of setting the date and time, these articles may help:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
Power off your TV, wait five seconds, then power it back on.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
Ensure that Apple TV is within range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
Check your Wi-Fi network settings on Apple TV:
Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
Choose your Wi-Fi network from the list.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Restart your Apple TV by selecting Settings > General > Restart.
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Cheers,
- Ari
Maybe you are looking for
-
Redistributing Large Amounts of Media to Different Project Files
Hello I'm working on a WWI documentary that requires an extremely large amount of Media. I was just wondering, if (besides exporting hundreds of QT files), perhaps just capturing all of this media, (spread out), into several FCP Project Files? In the
-
My flash player keeps quitting (Flash player unexpectedly quit), so I reinstalled the operating system only to find I get the same thing. This time I went to the Adobe Website to download and reinstall the application. However, this has not fixed the
-
ITunes installing error on Win7 32Bit
Hi, i'm getting that message when trying install the i-tunes on win7 32bit: An error occured.....Microsoft VC80.CRT/type...." HRESULT:0x80070bc9. Is there any solution about for fix that problem? Thanks for your help.
-
Really hard time with updating to ios7...
Hi so I got the update going on my iphone 4 earlier and it took an hour or so for it to download and another half an hour to process the update...then i had to leave for Youth Group, completely forgetting that i had to be at least connected to itunes
-
ORA-12514 Error when using Net Configuration Assistant
I have recently installed Oracle 11g on a Windows 2008 server and am now trying to connect via the Oracle client on my local machine. Here is how I've been using Net Configuration Assistant so far: Listener Configuration The name of my listener is LI