I have nothing in the "Scan to" menu in "Scan Settings" in Solution Center.

Hi
I have a Photosmart 2575 All-in-One printer/scanner which I have had working under Windows Vista Home Premium operating system on a Dell Dimension E521 for several years. The other day I suddenly received messages that Solution Center could not detect any HP devices. I have not installed anything new apart from automatic updates to the o/s and McAffee protection. I thought the solution might be to reinstall - which I did. Now, in Solution Center, I have nothing in the "Scan to:" menu in "Scan Settings". The suggested solution is to uninstall and reinstall - which I did to no avail. I also ran the HP Scan Diagnostic Utility - same recommendadtion! Any ideas? Thanks

Hi there rjbawden,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    Please help!.
    After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    You will prbably had other sync setting than the default ones
    Check if the option "Only sync marked songs" is checked.

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • How can I control where in  iPhoto my scanned photos will go? Right now they go to the very top of all the photos I have and I have to scroll the scanned photo  all the way down through 12,000 photos.

    I'm scanning photos to my iphoto . After they are scanned I find them at the  beginnoing of my iphoto collection and have to scroll them down through 12,000,,photos. Is there any way I can control where the scanned photos will appear in iphoto?

    You are asking about scanning photos to iPhoto on your Mac, right? This is the "iPhoto for IOS" forum, not the "iLife iPhoto" foruum for iPhoto on a Mac. Next time better post directly in the iLife forum - you will find more helpers there.
    have to scroll them down through 12,000,,photos
    Where do you look for your scanned photos? In the "Photos" view of the source list? I'd suggest, you look in the "Events" section. If you scan directly to iPhoto (assuming you use "Image Capture"), your scanned images will appear in the "Events" as "Unknown Project", and the events are sorted according to the settings in the "View" menu, "Sort Events" (assuming you are using iPhoto 9.x.x)
    If you want them to appear in an event with a specific name, don't scan directly to iPhoto. Direct the scanned images to a folder, and then import this folder to iPhoto. Then the photos will be imported into an event with the name of the folder.
    Regards
    Léonie

  • I have to reopen the scan program after each picture is saved.

    When I scan a picture using the HP Solution Center program, it forces me to Save and Finish after each scan and then I have to open Solution Center program all over for each picture.  The older version allowed me to scan and save a picture but left new scan window open to preview and scan the next picture placed on the flatbed.  How do I scan multiple pictures, each with its own file name, without having to restart the program for each and ever picture. The solution center run on a laptop that still has Vista on it will allow the multiple scans. The same program run under Windows 7 does not.

    Hello again Multiscanner,
    I have located two documents that I think may help with the issue at hand.
    Please click the following links for The Product Does Not Function Correctly After Reinstalling on a Network and Upgrading from Windows V...
    The second link is for Resolving HP Solution Center Scan and printer Status Issues After Upgrading From Windows Vista to W....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you once again for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

    I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • 6500 scan option in solution center reacts extremely slow

    Problem 1.It usually takes 5-8 mins for the scan window to show up after I press "scan to file" in solution center. This 6500 is extremely slow. I have had other hp all-in-one before and scanning has never been a problem.  I don't know how I would solve this. So I started searching a scan option shortcut. No luck yet. Anyone knows where I can find the shortcut? Problem 2.Since it's so slow to scan from the solution center, I tried to do it from the panel. However, when I pressed the scan button, it showed "scan menu: select computer". Then I pressed "OK", it showed "no scan options".I have searched online and it seems like a popular problem. I have tried all the methods found online, but nothing worked.  Thank you. I hope someone could help me on this. It's really frustrating. 

    Hi , Welcome to the HP Forums! I understand that you are having trouble scanning with your HP Officejet 6500, on Windows 7. I am happy to look into this scanning issue for you!  To make sure I know the exact printer that you have, what is your printer's Product/Model Number? (ie: HP Officejet 6500 e710a, etc.) To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. To verify the printer's hardware is functional, are you able to make copies with the printer?  In the meantime, I would recommend to try our HP Print and Scan Doctor, and let me know what happens!  Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • HP Officejet Pro 8500 A909a_ Scan with HP Solution Center doesn't work

    Hallo.
    My name is Michele.
    I can't use  HP Solution Center for scanning with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because, when I click on "Scan document" , a white error windows appears and says"Necessary Component is not founded or not correctly installed. Install again HP Photosmart software" . I uninstalled and installed again the software but it doesn't work. Previously it worked with XP. Recently I've updated XP with Windows 7 and I found HP Solution Center doesn't work. Perhaps it doesn't match with Win 7?
    Thank you to everyone who wants help me
    This question was solved.
    View Solution.

    Hi Folks,
    I appreciate the time you have taken trying to resolve this issue. I was able to do some more research, and found a helpful solution, please click on the link below to get started:
    The HP imaging device was not found... -Error popup
    Please try the recommendation and let me know the outcome.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • A740 Hardware Scan : Der Lenovo Solution Center Service ist nicht verfügbar

    Idea A 740 All-in-one: Der Hardware-Scan mit dem Lenovo Solution Center führt zur Fehlermeldung:
    "Der Lenovo Solution Center Service ist nicht verfügbar." Das gleiche Problem hat im englisch-sprachigen Forum aktuell ein A730 Besitzer, der angibt, dass eine ältere Vorversion des LSC noch funktioniert hätte.
    Was kann ich tun ?

    Hallo zusammen,
    wir haben Feedback von den Entwicklern erhalten.
    Bitte führt einmal ein Update von Adobe Air durch.
    Im "englischen"-Forum hat es danach keine weiteren Einträge gegeben:
    http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/thinkcentre-a-series-desktops/thin...
    Schönen Gruß,
    Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • The movies, tv and internet have disappeared from the apple tv menu??

    Has anybody else found these things missing from the tab menu on apple tv, There is only internet, computer and settings options and when I try and click on internet it does nothing. Could they just be updating??

    Welcome to the Apple Community.
    Check it still has an internet connection.
    Check your location setting is correct.
    Are you getting time or date error messages.
    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general.
    You should also try restarting your router.

  • I have problems with the Safari contextual menu

    It disappears after a while, and the only thing left is Copy image, Download image and some more. Save image as, and Open link in a new tab etc. is gone. It comes back for a short while if I empty cache, and restart Safari, then it disappears again.
    What should I do? This is quite annoying....
    Peter

    Peter...
    Check Safari / Preferences - Extensions. If you have any installed, turn that off, quit then relaunch Safari.
    And from the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

  • Error message in scanning:"The scanning software was launched with improper command- line arguments"

    We have downloaded and installed the HP Photosmart full feature Sostware and Drivers to Photosmart C3183 All-in-one.
    Click the Scan document in Solution Center-
    Error message displayed:
    The scanning software was launched with improper command-line arguments"
    Extended error information: 8,[(-1,0,0)]
    When Hp scan diagnostic utility  was used  - the message was: no scanners installed.
    how can we resolve the scanning problem
    nidataytay

    I have the same problem on a HP 5610 Officejet All-in-One.
    "The scanning software was launched with improper command-line arguments.
    8, [(-1, 0, 0)]"
    What is the solution? The scanner does not work. All other functions, print, fax, copy work from with in the HP Solutions Center software - but not the scanner.

  • Can't scan from Solution Center, using an HP Photosmart C4480 all in one

    I bought a C4480 from a friend, did not come with the software CD. I downloaded the full-feature software package from the HP site. It prints from solution center but when I press the scan button in solution center nothing happens. I tried uninstalling and reinstalling the software several times without success. Is there any way to fix this? Is there a software glitch and is there a patch available? Is there a way to scan without using Solutino Center? I'm running Vista 32 bit on a Dell XPS A1530.
    Thanks in advance for any suggestions on what to do.

    Hello Ben,
    I am sorry to see you are unable to scan from Solution Center with your Photosmart C4480. I understand you have uninstalled and reinstalled quite a few times and that did not resolve the problem. I would like to help you.
    First, I recommend running HP's Print and Scan Doctor.
    This is a tool used to search and help correct/target scanning and printing issues.
    To answer your question, yes you are able to scan without using the Solution Center.
    You can also use Paint, within any Windows operating system. (Select the top left down arrow, and choosing "From scanner or camera")
    Also, you can use Windows Fax and Scan. You can find that by clicking on your start button and typing "scan" in the search and it should come right up.
    If you are still unable to complete a scan, please try to make a copy on the printer.
    You can also try Resetting your Printer.
    Feel free to write back with your findings and any other questions or comments you may have.
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I find the drop down menu on Safari?

    I'm a total novice so apologies right now.  I've only had my Mac for a couple of weeks and already I can't sign into ebay which (on my old pc) meant I had to clear my cache.  I've searched and seen that I have to use the drop down menu but er, I have no idea what that is, where I can find it or how.   Many thanks in advance!

    Like I said, apologies!   Obviously, I didn't make myself clear at all!  Bodycalming, I can confirm that it isn't always possible to successfully sign into ebay.  Especially if you need to clear your cookies.
    Thank you Carolyn, I actually laughed when I read your reply and I'm sorry to have wasted your time.  I've been on ebay since 2003 so I know how to sign in there, I was just being bounced back to the sign in page each time I tried.  As I said, I knew how to deal with it on my old pc but was at a loss on my shiny new Mac. 
    shdr2thewheel, thank you for those links, I've had a quick look and they seem really useful.  I've already implemented a few changes!  I found the drop down menu now and have cleared my cookies and it seems to be working just fine.
    Thank you!

  • Changing the run-time menu programatically

    Hi All
    I am developing an application which will be a bilingual. when i click french button on GUI, all display messages changes to french. When i click on English, all captions and messages come in Engilsh. I am using property node to change the captions of controls and graphs for different languages. and using a global variable to pass the language information between different windows(Sub VIs). Now the problem is, i have to change the Run-Time Menu also. Not getting how to do this. Can anyone help me about this. Is it possible to make this?
    Thanks
    Anil

    Hi Anil,
    It looks like you are on the right track by using Property Nodes.  You can use the string input of the property node to select the appropriate message to display (language), along with a Boolean selector (ie: TRUE = English, FALSE = French (or vice-versa) ).
    You could also use a Property Node for the language selection.
    JLV

Maybe you are looking for