I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
Thanks

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Similar Messages

Getting The operation can't be completed because you don't have permission to access "iPhoto Library". when copy from old leopard timemachine backup

Getting The operation can’t be completed because you don’t have permission to access “iPhoto Library”. when copy from old leopard timemachine backup.
any help?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/E9.html

Getting "The operation couldn't be completed. (NSURLErrorDomain error -1100.)" when trying to check for software updates

Does anyone know how to resolve this problem? I get "The operation couldn’t be completed. (NSURLErrorDomain error -1100.)" when trying to check for softward updates on my iMac. I have the latest version of Mountain Lion installed.

Apparently a server overload > NSURLErrorDomain error -1100
Try again later.

Can't save multiple folders to external drive. Get: "The operation can't be completed because you don't have permission to access some of the items." when dragging large folders to mac os extended journalled external drive from OS 10.6.8

Hi
I am feeling VERY desperate!
After losing an external drive [dont ask....] -   I got another one : 2TB WD formatted properly [ OS extended journalled for mac ] ready for action to move my thousands of files and images and ppts in hundreds of folders across from the laptop to this drive because I travel a bit with the laptop and this is too risky not to back up at home.
But this message came up after starting on moving folders across [** and not straight away, sometimes after moving a folder when 4 of 6 gb of files across then the message comes up = very frustrating]:
"The operation can’t be completed because you don't have permission to access some of the items."
I am dragging mixed sometimes large complex folders to this os extended journalled external drive from my mac book pro OS 10.6.8 - it would take decades to move items one by one or even folder by folder and really confusing.
I have dragged-copied various small folders and files across successfully, but it is only working 50:50 and I can't leave machine with the idea of things copying eg: overnight - it just won't work....
I have been browsing google and find some people describing in CODE how they overcome this 'message'   .... but I [and I guess some other viewers of this in future & also in desperation] would need instructions for beginners.... to try this type of thing. I don't know any code.
How can this be happening - I feel ANGRY at APPLE !!!! for not posting easy fix instructions yet re; this, or better still updating software so it doesn't happen [ that I can find at least !!! ] .   There seem to be hundreds of people stuck with this stupid message and inability to back up their projects etc.
Can anyone help ?
Many thanks
Julie
15 August 2011

hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop -    I thought I would just move it all now, new - and then keep saving/dragging physically   across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ?   =   under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie

On tnsfr to applic folder, I get "The operation can't be completed because you don't have permission to access some of the items.

i'm trying to update from 3.2, but when I try to transfer the download to the application
folder I get the message, "The operation can’t be completed because you don’t have permission to access some of the items."

See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

IPhoto problem, get The operation couldn't be completed. (OSStatus error -54.)

I try to open/enlarge a photo from my library and a keep getting the message"The operation couldn’t be completed. (OSStatus error -54.)" What do I do to correct the problem?
WHE

Hi Terence,
Thank you for your help.
My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
Thanks
Charles

When creating a new event it tells me "attendees can not be changed" I didn't try to change attendees I was simply inviting one. What's happening? I did a reboot but the same message showed up again

I am trying to invite one person to an event. I click the plus sign create the event and add my one attendee. However, when I go to complete it the attendee is no where to be found and I get a pop up box that's says "attendee can not be changed". I didn't change the attendee. The names was pulled from the address book with no problem. I do notice when I go to change my calendar that the attendee line seems to disappear. Help? I am using iCloud with Mac book Pro, ipad2 and iPhone.

Connect to iTune and "Check for Update" (tap to enalrge image)

I use mymsn page and when upgrading to Firefox 4 the changes went away and I can not make changes to the stocks area or see my emails. How do I fix that?

Mymsn has areas that allow you to list your stocks and also an area that allows you to see what emails you have waiting to be read. Both of these areas went away when I upgraded to Firefox 4 last week. When clicking on the menu area to make changes, nothing happens. How do I get back the information that was in these areas? Also the customize button does not work.

Do you have Adblock Plus installed? If you do, disable on the page where you normally see your stock info. I've uploaded an image of what happens on another site where ABP is enabled. The Global News image disappears with ABP enabled even though it's not an ad.
If that doesn't work, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your add-ons is the culprit.

The operation can't be completed because an unexpected error occurred (error code -50)

I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3). I have a late 2011 macbook pro with Yosemite on it. When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" . I only get it when I am trying to copy a big folder with other folders and files with in. I can copy a single file or create folders. If i try to copy a folder with 100 pics in it then I get the error. I can create the folder on the NAS and select all 100 files. When I drag them to the NAS, then they copy with no problems. Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences. Still no luck. A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
Thanks for any help in advance.
Billy

Hi there,
Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
I reset the disk, and now I can only write some files to it, but most give this error code.
I wrote to WD, but they could not give an answer.
Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?

An unexpected error occurred (error code -50) when saving to ext HD.

I have an external USB Raid configured 2x3T config for a total of 3T of storage. It was working fine and now when I try to save to the hard drive I get: The operation can’t be completed. An unexpected error occurred (error code -50). Any suggestions? I have reset the PRAM, ran disk utility, restarted the computer, restarted the hard drive etc with no luck. Any suggestions would be appreciated because I cannot find any help on the internet.

Hello,
enum {
paramErr = -50, /*error in user parameter list*/
Not too helpful by itself, but can mean an unacceptable character in a filename like...
? / \\ < > " | > *
when copying to a FAT32 formatted drive or using SMB for file transfer. Can also be a Permissions problem, usually on the receiving end, & in the old days could happen if a file had forks...
http://support.apple.com/kb/TA20831
If using Time Machine...
Error -50...
http://pondini.org/TM/C10.html
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
I can't imagine anything TMwise not covered.

Two Macs using separate Time Capsules on same network - The operation couldn't be completed. (OSStatus error 2.)

Six hours of configuration and I'm out of ideas.
Here's the layout:
Cisco Cable Modem connects to my ISP. It uses DHCP to distribute IP addresses which is necessary as ethernet throughout the house is piggybacked on coax and the ethernet to coax adapter has a mac address and needs to take an IP address (DirectTV - not my idea). Though not my preferred config, this seems solid.
Cable Modem connects via ethernet (though this crazy coax adapter) to Downstairs Time Capsule (call it DTC). DTC is set to create network without using DHCP so that no duplicate IPs are dished out. No problems so far - everything works. DTC has a MacMini hooked up by parallel ethernet and the MacMini is set to back up to the DTC disk, called "Combo Time Machine". Back up is running smoothly, no problems.
On the same network there is another Time Capsule connected, called Upstairs Time Capsule (UTC). UTC is set to create network in bridge mode so as to repeat the network created by the DTC (to increase range). All of this is, network-wise, is working fine:
UTC is connected by parallel ethernet to an iMac which I want to back up to the UTC disk, called "iMac Time Machine". This is where the problem starts. It seems logical that one Mac could backup to one Time Capsule while a different Mac back up to a different Time Capsule, even though everything is on the same network, right?
So here's what I see while using the iMac to try to configure Time Machine upstairs:
Looks good, right?
It's as if the Time Machine software confuses the two Time Capsules - it's asking for the Downstairs Time Capsule disk password, not the Upstairs one as it should be. Still, I try the password and here's what I get:
"The operation couldn't be completed. (OSStatus error 2)" means nothing to me... little help?

I have an idea this is going to take some working out.
What IP is the upstairs TC and what IP is the downstairs one?
Can you ping them both please by name and by IP address?
Can you manually mount the share you will use for time machine in the iMac upstairs..
In finder go, connect to server.
Type in the name AFP://user@TCname
You will then be asked for the password and it should be able to be stored in the keychain. Then select that for TM.. if TM still carries on, reset it and try again. See A4 here.
http://pondini.org/TM/Troubleshooting.html
The double entry and refusing to join the right disk is a Mountain Lion trait.

HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
Any advise how to fix my problem?
thanks in advance

While you see a single trash can, in reality there are trash folders on each mounted volume. I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated. So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty. Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal. We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time). So launch Terminal (in utilities). You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
This first line is the only exception to the copy/pasting since you have to enter some information.
sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
where your-TM-volume-name is the name of your TM volume. That's the part you have to fill in since I don't know it.
When you hit return the sudo in that command will cause a prompt for your admin password. Enter it and hit return again. Note the password will not be shown as you type it. Post the results so I can tell you what to do next.
Note this ls command is not doing anything but listing the files in the TM's .Trashes folder. Remember I said each drive has it's own trash folder. .Trashes is it.

I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.

All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I tried to empty the trash, full of back up file from my hard disk and it just says: "The operation can't be completed because an unexpected error occurred (error code -8003)"

I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
I've a MacBook Pro with a Mac OS X 10.6.8 Version.
Thanks again for the help and sorry if I did some english mistakes !
PEACE & LOVE

Hey donnie90,
It seems like this article might be the best for helping you address this issue:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

Similar Messages

Maybe you are looking for