I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to print any of these photos?
I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick Koos
I have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.
Similar Messages
-
Hi
I upgraded our Ipad2 and we have noticed there are several calendar items missing which were there prior to the upgrade. Can I restore historic calendars from itunes/pc or icloud?Please please help me, if you know how.
-
After clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?
Hi Tonma,
Sounds like your device is in recovery mode. Follow the instructions in this article:
http://support.apple.com/kb/ht1808
Cheers,
GB -
i just upgraded to firefox 4 grudgingly, as i had this same issue when i upgraded to ff3, which i ultimately dumped, and went back to an older version. pages open very very small and i have to zoom in, to fill the page, and make it readable. once i have done that, those proportions are somehow remembered, and from that point on, they will open up at a large size.
how can i get ALL pages to open up to a standard. predetermined size?
on a related note, the toolbars are also very small. can i make them larger somehow?That is a problem with the Flash plugin.
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html -
I down loaded my entire contents of my desk top hard drive to my lap top. Now I don't know where my original files and pictures are. How do I find them or down load just what I am missing with out losing what I just installed ?
Hi Again, Well I found Carbon Copy Clone on my old hard drive so I didn't even need to download it. I just dragged it onto my desktop and I did as you said. Using CCC and within the folder of users which has my folder of old hard drive there now shows a file called.autodiskmounted (whatever that means) and then it has a version of my hard drive below that called hard drive 1, which has nothing, but above both of these folders, there is a folder with an old user name which shows up empty on the hard drive when I search it, but actually shows lots of folders on the CCC. So without getting too excited, it lists some folders and amongst them are folders I cant see normally in the old hard drive, like my safari settings and favourites, and movies music and pictures. However in the movies pictures and music folders I can only see a blackish square that looks a bit like a blank screen with the text.localised after it .
Does this mean anything to you / Is there apossibility they may be there? When I selected my new laptop as the destination i got this message below so I did not proceed any further as I'm not sure it will back up the files I need..
To avoid system instability, CCC has applied a filter that will exclude system files from the backup task.
If you would like to restore your Mac OS X system files, restart your computer from the backup volume and try the backup task again.
If you are trying to restore a single item or folder, click the "?" button for additional suggestions.
Is it worth giving it a try? Thanks for this btw, its further than I've got before!! -
i have one problem with my iphone 4s i c"ant make facetime calls with other iphons. olso when i make calls on the facetime icon is question sign! can any oane hellp me! wath my be the problem because it is all new iphone!
First question where ae you located? If you're in the Middle East or UAE, factime has been restricted by the government.
If your not from there look here:
http://support.apple.com/kb/TS3367 -
I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
any suggestions?weird.
It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
Thank you so much for your prompt replies.
It's past midnight here so I'd better get some rest...
Good night captfred! -
I have one library with around 50 Projects (this represent around 1500 pictures)
I gave to hundreds of them a specific keyword how can I found them ?
MarcIf it is ok for you I would like to ask you another question.
With the filter settings removes I discover that I have more then 10'000 pictures !!!!!!!!
As I'm organized to have one archive files per year, I'm discovering a lot of pictures which have a keywords "from MobileMe". Is that correct to assume that is represent the pictures from the old world from mobile.me ?
Sorry but I can't help with this, I never used mobile me so I'm not sure how it worked.
It seems safe to assume that the images tagged with the MobileMe keyword were in your MobileMe galeries but exactly what that indicates I can't say.
regards -
if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?
If you want both iPad to be identical .....
Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
Now connect your iPad to your Mac and start iTunes.
When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
Sync the iPad and eject it when it is complete.
Quit iTunes
Connect the second iPad.
Launch iTunes
Right click on the iPad name on the left side and select - Restore from Backup
Select the backup of the first iPad and let it restore from that backup.
When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
Eject the iPad when you are done.
Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes. -
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
On iPhoto I can see all the pictures for one event, but about 9 out of 106 I can't move to print or place it anywhere else?
Basics from the manual are restrt, reset, restore.
Have you tried each of these? -
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
I have one folder on my desktop, i want to copy it on external hard drive so how can i do this?
I have one folder on my desktop, i want to copy it on external hard drive so how can i do this?
Welcome to Apple Support Communities
Connect the external drive and open a Finder window pressing the Finder icon in Dock. Then, drag the folder to Finder, so it will be copied to this external disk.
If you can't copy this folder, probably you have to format the external disk or use an app that allows you to write in that external drive. Mac OS X can't write in NTFS external disks -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.
Maybe you are looking for
-
Pass Bean Name as a parameter?
Hi, Is it possible to pass the bean name as a parameter to the method? In that case, we can pass the bean name as a String to the calling method? Thanks Aishu
-
What is the best way to completely uninstall Aperture from a MacBook Pro?
What is the best way to completely uninstall Aperture from a MacBook Pro. I just ordered a new MacBook Pro and I want to remove it from my older MacBook Pro.
-
Can Captivate 5 allow user to answer all questions and then submit?
Good morning, I am doing a management comparision so our team can select our standard quizzing tool. I am comparing Quizmaker by Articulate and Captivate. What we are not going to do is say; "this tool is our standard and we will always use it." W
-
Currently, i have an Cisco IE3000 switch, with an interface defined as a trunk. The other end is unknown to me, but I know it transmits tagged frames. I just don't know which VLAN-ids are in use - so I was thinking on doing some debugs to learn the V
-
i need to change bpm on two tracks in garageband