I have one letter on the keyboard that is unresponsive to touch. Why?

I have one letter on the touchscreen keyboard (N) that is unresponsive to touch. Any suggestions?

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since you have a hardware problem
Apple Retail Store - Genius Bar

Similar Messages

I have one key on my keyboard that I have to punch hard to get it to work. How do I fix this?

I have one key on my keyboard that I have to punch hard to get it to work. How do I fix this? Does a laptop have the same capability to pop off the keys and clean them like desktops do?

Welcome to Apple Support Communities
Connect the external drive and open a Finder window pressing the Finder icon in Dock. Then, drag the folder to Finder, so it will be copied to this external disk.
If you can't copy this folder, probably you have to format the external disk or use an app that allows you to write in that external drive. Mac OS X can't write in NTFS external disks

Lost the ability to capitalize one letter on the keyboard

I have lost the ability to type a capital "I" on my keyboard. The only way I am able to type it here (or any other application) is to press the key caps button. I don't know if it makes any difference or not, but I changed a keyboard shortcut earlier in the day (but it did not involve the keystrokes "Shift" or "I". Any help is appreciated.

did you ever figure this out/ i can't use the 'at' sign for emails, i can't use the question mark, anything that requires a shift key, it; not the speech thing and i returned everything to default. the shift key on either side of the key board makes the entire screen disappear to the left, hit shift key again, it comes back. i don't think i got a crumb under each shift key.
i am very discouraged with this new macbook pro os. i was raised on mac until os 7 and changed to windows for medical software. i just had to return to macs and now i'm just cussing like crazy all the time.

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore and they were not at all encouraging, saying they doubt that the

I purchased a Macbook Air 11" in January 2011. It has one key on the keyboard which sticks making an irritating clicking sound that I would like to get fixed. I took it into my local iStore but they were not at all encouraging, saying they doubt that Apple warranty will cover something like this, and also that the whole keyboard would have to be replaced as they don't do individual key repairs.
This is very unreasonable to me. Firstly, the keyboard does work (is not actually broken) although the intermittent clicking sound of a single key is very irritating to me and I expect more from an Apple product than a flawed keyboard.
Any thoughts, tips and insight on this greatly appreciated.

Just wanted to conclude by saying that I did go to an Apple store and after supplying proof of purchase and verifying the warranty etc, I had my MacBook checked out by one of the technicians who (after finding that my machine was immaculate bar the sticky keyboard of course) they replaced the entire keyboard within a week.
I was so happy with the helpful and prompt service and am now so happy with my new silent keyboard!
Also wanted to add that the young guy who told me at the iStore that he doubted Apple would support this and guessed Apple likely say it was due to user damage was being a tool, and he was obviously assuming that I had done something wrong to break my keyboard.
This was my first Mac purchase and I was delighted to find that the support is genuine and not just a rumor... I have since gone on to purchase an iPad2 will probably buy the iMac too once my trusty PC needs replacing. I was never a PC hater and got on well with windows, and was actually reluctant to make the change - but so far so good :)
Thanks for all the help!

I have a iPad 4 on iOS 7.0.4 and every time I go to the spotlight search my iPad would respring just after typing in one letter in the spotlight search bar and it keeps d..please help I have to give this iPad to my grandma for her birthday on January 6

It would respring after typing in one letter at the spotlight search bar...how do I get rid of this...I have noticed this change about 1 day ago

You will need to look elsewhere
Jaigosh00 wrote:
... I think my cousin jailbroke the iPad without my knowing because there is a weird icon that says Cydia...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743

TS1559 I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

http://support.apple.com/kb/ht5621

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
Thanks

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I have a Targus Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. Help ??

I have a Targue Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. I just get a blinking blue light. Help ??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS4006 I have set up Find my phone on two Iphone 5's. On one I get the message that it is offline but they are both set up identically

I have set up Find my phone on two Iphone 5's On one I get the message that it is offline. From this phone, I can locate phone #2 but from phone #2, it say phone #1 is offline

Welcome to the Apple Community.
Once you have enabled find my phone in your iCloud settings on your phone and find my mac in iCloud settings on your Mac, you can log in at iCloud.com and see both devices on the Find my Phone feature there.

One button of the keyboard doesn't work correctly

Hi there,
I have a problem with my keyboard:
One button of the keyboard doesn??t work correctly: I want to write down a vowel with an accent (like in French and Spanish?), but if I press the button ´ and then the vowel, TWO dashes (´´) and the vowel appear: ´´i. Normally, there would automatically be an accent on top of the i.
I have already tried a different keyboard, but it??s the same problem when I connect it to my notebook. I have also tried to choose a different language like French and Spanish, where they have those accents, but it still doesn??t work.
It would be great if somebody could help me.
Thanks a lot,
Hanna

Hi Hannah,
You do not say which options you have changed to try using a different language, but there are several options which do slightly different things.
If you go into Control Panel and select "Regional and Language Options", a new window opens with 3 tabs across the top. Choose "Languages" (the middle one), then press the "Details" button. This opens another window which allows you to view and change settings including the current input language and keyboard settings.
Changing some of these settings will not make any difference until you reboot your machine.
I hope this helps, let us know how you get on!
Weezle

I have one modem in the house but I need 2 different networks.

I have one modem in the house but I need 2 different networks that will not communicate or even see each other. The first network is the one that needs to be the most secure. The computers are used for personal information, documents, pictures, Apple TV and iTunes home sharing.(3 Apples, 3 iPads, 3 iPhones and 4 Apple TVs) The second network needs to be for the 3 computers and gaming systems used for social games on Facebook, PSP, XBox, and a gaming system used for World of Warcraft. The social interactions seem to be the ones that have picked up most of our computer network issues and I would like to be able to isolate them from any communication with our home network (2 PCs and 1 Mac). Is there a way that I can use 2 different routers along with blocking any bluetooth and/or bonjour connections? I am not worried about a networked printer for the second network, it is more to try and contain any issues that may slip though virus protection and create a mess with our home systems. It would be nice to still be able to set up a Guest Network for the herds of kids and adults to use when visiting as well. PLEASE tell me this can be done.
Thank You
Christine

Christine,
Apple may be able to do some, but not all of what you want to do.
The dual band AirPort Extreme can create a main, or "private" network and a separate "guest" network. The private network can be configured to handle both wired and wireless clients. The "guest" network works only for wireless clients.
Computers, devices, etc on the "guest" network cannot "see" or communicate with any of the devices on the main or "private" network. But, it is possible to allow clients on the "guest" network to see other devices on the "guest" network, so a wireless printer on this network would allow anyone on the "guest" network to be able to use the printer if you need that functionality.
You can "extend" the "main" network using more wireless devices if you need more wireless coverage. The "guest" network cannot be extended.
Depending on the level of service you have with your ISP, you may have bandwidth issues with two networks and multiple devices all trying to use the Internet connection. I would think that a 25-30 Mbps connection would be the bare minimum to handle what you want to do and 50 Mbps would be advised.
If you want to use two separate routers, you are really looking at a commercial type installation best handled by commercial products like Cisco, so that might be the place to look.

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

That only happens when you are running Windows in a Virtual Machine with OS X as the host. Shut down the VM and restart your Mac. Once the VM is running again and you insert a USB flash drive you should get that prompt again.

I have an Apple pro wired keyboard that I want to use with a Windows PC. It seems to recognize it through plug

I have an Apple pro wired keyboard that I want to use with a Windows PC. It seems to recognize it through plug & play, but stops working after a few minutes. Does anyone know of a fix to this situation?

Hi,
Could you explain that again using different words ?
I am not clear on what it is that you want to do.
What are you trying to sync ?
Contacts ?
Emails ?
Other info ?
If it is Mail who do you normally get it and what applications are you using ?
People also might want to know if it is a POP or IMAP account before they can help.
9:05 PM Monday; July 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I press a letter on the keyboard it does multiple letters when I only press it once

This has only just happened and it is not always the same letter. The letter on the keyboard changes from time to time. Sometimes the keyboard is unresponsive like when I want to add numbers. I will press "s" and 5 or 6 "s" will appear on the screen.

You could try it again, and you could also try closing all apps via the taskbar and see if that makes any difference : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

I have one letter on the keyboard that is unresponsive to touch. Why?

Similar Messages

Maybe you are looking for