I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks., I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks.

I have OS5 on my IPad.

You first need to setup the printer with your computer to use it wireless with your router. Use a Static IP address for the printer on your router.
Then be sure the iPad is on the same WiFi network and the printer is on.
Then you can use this Apps on your iPad;
http://itunes.apple.com/app/hp-eprint/id299531647?alreadyRedirected=1&mt=8
You can also try this App; http://itunes.apple.com/app/hp-printer-control/id469284907?alreadyRedirected=1&m t=8

Similar Messages

HT1800 Trying to add a wireless printer to my MacBook Pro. It was working properly until we had to buy a new modem. I have gone through the steps associated with my printer and the other laptop in the house (Dell) working right. MacBook says printer dis

I am trying to add a wireless printer to my MacBook Pro. It was working properly until we had to get a new modem. I have gone through the steps with the printer customer service rep, and it was working properly for one day. When I booted up the next morning, the printer was no longer "connected". It will work if I have the printer and computer connected, but I much prefer the wireless capability. Suggestions? The printer is a Brother MFC7860DW. The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.

Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

I have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

i have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

Try the developer's forum:
https://discussions.apple.com/community/developer_forums

I'm trying to unlock an Iphone 4. The celular company allready unlocked it. and send me an E Mail with the instructions to do it myself. I have done every step, and in itunes apears that my Iphone is Unlocked. But I can not use a sim CArd from another Co

Im tying to unlock an Iphone 4.
the celular company make it by its system, and send me an E mail with the instructions to finsh the process by myself, throug itunes.
I did every step, and at the end appers a message telling that my Iphone is unlocked.
but it does not work with other celular company sim card.
It only works with the original sim Card company.
In the Iphone appears a message teeling that has no service with another company's sim CArd.
I don't know what to do.
I've been doing this, with different Sim cards.
sometimes appears a message informing that the SIM card is locked with a PIN. That i must instal the last itunes version and connect it again.
but every Sim card I have are with PIN.
If you can help me I;ll be very glad.
Thank you very Much.
nicanorfrommon

Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

HT4972 I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help with me step by step instructions.

I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help me with step by step instructions.

iOS 4.2.1 suggests that you may have 2nd generation Touch, which cannot be updated past iOS 4.2.1
Check http://support.apple.com/kb/HT1353 for help in identifying your model. A quicker method may be to check the back casing. If your iPod has Model No.A 1288 etched into it, then it's a 2nd gen Touch.
Assuming that you are using the latest version of iTunes (today, that is 10.6.3), to check if your iPod can be updated, connect it to your iTunes and look on the Device/Summary pane. Select Check for Updates. If there is one, you will see a message telling you that and how to install it. However, if you see a message saying that your iPod is up-to-date, then it cannot be updated.

TS4062 I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. Any other suggestions?

I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

QUESTIONS: I have an iphone 3gs.just updating to ios5. am at the stage where I chose to restore iphone via itunes. sync seems stuck at step 7 of 7: syncing artwork. Is this necessary and if not how do I get around it?

QUESTIONS: I have an iphone 3gs.just updating to ios5. am at the stage where I chose to restore iphone via itunes. sync seems stuck at step 7 of 7: syncing artwork. Is this necessary and if not how do I get around it?

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

I have a brand new Macbook Pro and I can't connect it to my printer which is a Dell 1110. I have called/emailed Dell and Apple. Apple gave me a list of steps and the final step is to navigate my driver and I can't find it. Where can I find it?

This is the link that was given to me and I am using the USB instalation steps:
http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=41 5661#Issue0_1

I have been Googling for a while now and it appears that there is no driver for the newer Mac OS'es....for the Dell 1110.....a mention of Gutenprint generic drivers and for Samsung drivers (they make the printer for Dell) is all I found...
forums.macrumors.com/archive/index.php/t-1139628.html
answers.yahoo.com/question/index?qid=20080122030025AAwcFmR
https://discussions.apple.com/thread/2015609?start=0&tstart=0
......and these threads are old.....

Continue to receive error 1604 and can't use the recover function - help! I have gone through all the steps listed in support and nothing has worked. I am using a usb port I tested with my printer cable and it's fine.

I wanted to update my software this morning and it has turned into a nightmare. I continue to receive the error 1604, which is related to a usb port. I followed all the steps listed in support and nothing has helped. I just plugged in my printer cable to the usb port and it works fine, yet I continue to receive this error and can't use my phone!

A printer does not require power, and does not transfer large amounts of data. So that is not a valid test. It's like saying "if I plug a nightlight into an outlet it works fine, so why do 2 hair dryers on at the same time trip a circuit breaker?"
Are you using a port directly on the computer, and not a hub? If it's not a laptop and it has ports on front and back are you using a back port, which can supply more power?
Have you EVER used this computer to hack or jailbreak ANY iPhone (not necessarily the one with the problem? Or used a program to downgrade the version of iOS on any phone?

I have windows7 and my ipad2 completes only 1 or 2 steps and then shuts down with completely syncing

When I connect my iPad2 to my computer (Windows7) and open iTunes to sync, it completes only a couple of syncing steps before I receive a windows error message and it shuts down. This does not happen when I connect my iPod to my computer, open iTunes and sync. Both the IPad2 and Ipod2 have the same music, photos etc. Is this like to be an iTunes problem, or iPad problem, and if so, is there a program I can download to allow a complete sync?
Regards
Jane

If the error message contains a number read here > iOS: Resolving update and restore alert messages
Your anti virus softare and Firewall could be preventing the sync process.
Read here > iTunes for Windows: Troubleshooting security software issues

I have just establishes my airprint but am unable to instruct the printer to print black and white only.How to proceed please

i am unable to instruct my printer on airprint to print black and white only. The only option appears to be the no of copies.Any help please

Both the drivers
Canon SELPHY CP series Printer Driver 6.2 for Mac OS X 10.8 and the Apple Canon drivers
may be needed together. Not sure which will have to be installed before the other. As for your iPhone, you'll have to enquire on the iPhone forum how to make it work.

To add meta tags, you open your published .html pages with TextEdit or any other text editor and modify as required. You have to do redo it each time you republish. Ihow do I do this? I need step by step instructions

To add meta tags, you open your published .html pages with TextEdit or any other text editor and modify as required. You have to do redo it each time you republish. I need step by step instructions on how to accomplish this please .

Rage Sitemap Automator and iWeb SEO Tool are two different applications.
Use SEO Tool to add the title tag and meta description. These need to be added to the html file for every page of your website. SEO Tool stores all these so that when you republish you only need to add tags to any new pages and click the re-apply button to refresh the existing ones.
Once you have added. refreshe the tags with iWeb SEO Tool and uploaded the files with your FTP application, then open the site in Sitemap Automator and create and upload a new sitemap.
Once you have set up accounts with Google, Yahoo and Bing, verified your site with each and submitted a sitemap, on subsequent publishing Sitemap Automator will resubmit the sitemap with one button click. It will also notify Ask.com whch doesn't require an account since you can add your domain name to this URL to ping them...
http://submissions.ask.com/ping?sitemap=http%3A//www.domain.com/sitemap.xml

I have an iPhone 4 and iPad2. I need step by step directions on tethering I have AT

I have an iPhone 4 and iPad2. I need step by step directions on tethering. I have already purchased the extra plan thru AT&T

There are instructions for setting up personal hotspot on this page : http://support.apple.com/kb/HT4517

I have a Windows PC with iTunes and an IPod Touch. I would like to be able to sync music in two areas. Would the Airport Extreme accomplish this? And, if so, are there step-by-step instructions somewhere?

I have a Windows PC with iTunes and an iPod Touch. I also have a Verizon MiFi. I would like to be able to sync music to two locations. Would the Airport Extreme accomplish this, and if so, are there step-by-step instructions somewhere?

No, it will sync the ipod to the content of the MBA which presumably has nothing on it (= erasing content of iPod and replacing it with nothing).
Ideally:
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.
Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html
if you absolutely must use the iPod:
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store

I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks., I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks.

Similar Messages

Maybe you are looking for