I have OS10.6 and when I try to update I receive error message after validating packages and updates to not tke.

I have OS10.6 and when I try to upload updates I receive an error message when validating the packages. No updates take place.

Are you using Software Update? And what is the error message?
You are on 10.6.0? Why don't you download the combo updater for 10.6.8 directly from Apple and try to install it from there:
http://support.apple.com/kb/DL1399

Similar Messages

  • I receive error messages after installing Illustrator and InDesign

    Before today, I spent 3 days downloading the trial programs for Design & Web Premium CS6:
    Photoshop, Illustrator, InDesign, Audition, Bridge, DreamWeaver, ExtendScript Toolkit, Extension
    Manager, FireWorks, Media Encoder, Muse, Prelude, Widget Browser, Flash Builder 4.7, Flash Professional and Media Encoder. (This is all through my online classes, and I do have a serial number that was sent to me, but no CDs.)
    I used Adobe Application Manager to install them.
    Everything downloaded and installed fine on my main computer (running Windows 7), but on my older,
    slower, backup computer (running Win XP) I encountered problems.
    I have DSL (the lowest speed, 1.5), Win XP (32 bit) SP2, 28.6 GB capacity hard drive.
    Used space (after the downloads): 17.2 GB (61%)
    Free Space: 11.4 GB (39%)
    Downloading the trial on my Win XP computer gave several errors, and I had to re-install and/or update (at first it would say 'Try,' but then after that was done, some of them would say 'Update') most of the programs several times before they finally all seemed to fully download OK. For one of the programs, it gave an error saying there was not enough hard drive space. So then I deleted a few programs from my hard drive. But all the other programs gave different errors, which would say that they installed, but that there were problems, or that they could not install, etc.
    But, after downloading everything, and everything seeming to be OK, when I tried to open Photoshop CS6 (trial version), it said:
    Photoshop.exe - Entry Point Not Found
    The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.
    (And it had the red circle with the white "X" inside it.)
    I then tried to open Illustrator, and it said:
    "Illustrator.exe - Application Error
    The application failed to initialize properly (0xc000001d).
    Click on OK to terminate the application."
    I then tried to open InDesign and it gave the same error as Illustrator.
    So then I ran all my anti-virus, anti-spyware and diagnostic software to see if there were any viruses or spyware or malware found. Nothing was found except some tracking cookies.
    Then I uninstalled all the Adobe software, which took a while.
    Then I used Adobe Application Manager to only download Photoshop. It seemed to download and install, but finally it said, “Installation completed though some optional components fail to install correctly.” This is one of the errors I had gotten previously. When I clicked to see more info about the error, it said to either find a certain file, which I could not find because it looked like some of the files it mentioned were invisible files, or it gave another option, to download Microsoft Visual C++ 2010 Redistributable Package (x86).
    So I went to Microsoft’s website and downloaded that. But when I tried to install it, it said I needed to install Windows Installer 3.1 or higher. So I went to that website and downloaded that (the downloaded installation file was called WindowsInstaller-KB893803-v2-x86.exe. So I installed that.
    Then I went back and tried to install Microsoft Visual C++ 2010 Redistributable Package (x86) again (that installation file is called vcredist_x86.exe). After it extracted the file, it said, “Microsoft Visual C++ 2010 x86 Redistributable Setup: (red circle with white “X” inside) “Setup has detected that this computer does not meet the requirements to install this software. The following blocking issues must be resolved before you can install Microsoft Visual C++ 2010 x86 Redistributable Setup software package.” “Please resolve the following: A newer version of Microsoft Visual C++ 2010 Redistributable has been detected on the machine.” Then at the bottom of the error window, it said: “Please, see the Microsoft Visual Studio website for more information.” Then it only had a “Close” button.
    I went to the Microsoft Visual Studio website, but I’m not sure what to do. It has an Office Developer Tools for Visual Studio 2012 (“Now you can create rich, immersive apps for Office 2013, SharePoint 2013, and Office 365.”) with a “Download Now” button, but that does not sound to me like what I need.
    I saw, on one Adobe site, a suggestion to go to the Adobe Creative Cloud website and download the software from there (which I noticed also used the Adobe Application Manager). So I did that for Photoshop, and after it installed and updated, it gave me the same error: “The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll.”
    As of Friday March 29, I have been working on downloading and installing the software for FOUR (4) days now without success, and it is just so frustrating because it is taking so much time and effort.

    Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

  • I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

    I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.  Try to export to an external HD attached, all help would be gratefully received 

    Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

  • Just installed itunes but when i try to open it this error message pops up: "apple application support required." I've tried uninstalling and reinstalling but nothing works

    Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works

    When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
    When you installed iTunes did you get any error messages?
    Anyway, on the face of it it may be worth trying a separate install of Apple application support.
    Uninstall iTunes again. Now open Apple Software update, assuming it is working.
    It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
    Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
    Before going on, can you get to this stage OK?
    One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures.

  • TS3697 all of my songs are gone and when i try to sync again the sync is 2 seconds long and nothing happens

    all of my songs are gone and when i try to sync again the sync is 2 seconds long and nothing happens plus all of my photos from my computer synced to my phone and i cant delete them and i dont have neough storage PLEASE HELP ABOUT TO CRY

    1. Have you applied sync settings for music to be synced to the iPhpne?
    2. Photos that are synced to the iPhone cannot be deleted directly from the iPhone
    To delete photos and videos from your device
    To delete synced photos and videos
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.

  • Firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English

    firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English, so i have to go to the
    task manager and find firefox 32* and kill it then firefox will reopen when asked too

    firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English, so i have to go to the
    task manager and find firefox 32* and kill it then firefox will reopen when asked too

  • I bought a movie on itunes and when i try to play it on my apple tv it says the device is not autorized.  My apple tv is the older one with an actual hard drive that is full. Tha apple tv is logged into my itunes account.

    I bought a movie on itunes and when i try to play it on my apple tv it says the device is not autorized.  My apple tv is the older one with an actual hard drive that is full. Tha apple tv is logged into my itunes account.

    ATV2 does not have permanent storage. The rental is flushed when the device is turned off or other content accessed. You would need to use your computer to rent (and home-share to ATV) if you wish to store for a later time.

  • I am trying to create an executable vi that will call out another vi and show its front panel in the executable​. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

    I am trying to create an executable vi that will call out another vi and show its front panel in the executable.  When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

    Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
    I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
    If you go down the stuff.vi route Keep us curious guys posted
    Jeff

  • Why is it when I try to download music an error message pops up and will not let me buy the music?

    Why is it when I try to download music an error message pops up and will not let me buy the music?

    Same happens to me......

  • How come when i try to sign in an error message says it cannot perform this task?, How come when i try to sign in an error message says it cannot perform this task?

    I cannot log into the itunes store. Everytime that I have tried to log in and error message appears and says it cannot perform this task...and when I try to go into the music section of the application it says its not availble in the U.S as this time? Is there any one else having the similar problem?

    If you can't send an SMS message, iMessage will NOT be able to activate. It uses SMS to activate it and tie it to your phone number. Contact your carrier about the SMS problem.

  • TS3297 When I try to download music an error message appears that says "We could not complete your itunes store request.  An unknown error occured (-1202)

    When I try to download music an error message appears that says "We could not complete your itunes store request.  An unknown error occured (-1202)

    Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • TS1718 I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

    When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

    Do you have a license for InDesign?

  • How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing.

    How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    tt2

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

Maybe you are looking for

  • How to preserve group ownership

    I recently created a group called "special", added some users (including myself), and successfully created a directory where all users in the "special" group can read and write. The umasks have been changed from the default 0022 to 0002 in /etc/launc

  • Adobe Acrobat forms

    I have made a fillable form in Acrobat and need to get it into Iweb. I tried to drag the PDF into the window but it looks like it disabled the fields. Can this be done? I just want my customers to fill out the PDF and then e-mail it to me. Can this b

  • This computer is not a domain controller. biztalk configuration?

    I am trying to configure biztalk server using domain service account. I have created AD & correesponding users  but when i am trying to configure it its throwing belwo error This computer is not a domain controller. Can any one let me know what is th

  • Adjustment Layers

         I am trying to create a script that will copy and paste, essentially, the attributes of adjustment layers.  I have been unable to find a great deal of information on this on the web, forums and the javascript ref guide. Is there a one size fits

  • Can't find the presets folder in After Effects

    I'm new to AE and i've watched some tutorials online showing how to add presets, but when I go into the support files in AE I can't find the presets folder