I have pdf files created by a scanner. How do I save them in PDF/A?

I scanned forms which were used in a project to preserve them. Now I want to save them in a PDF/A format for long term preservation. I have Acrobat Pro XI. When I run the program either in Save As or through the Preflight I get a whole bunch of problems which do not allow me to save it. Can anyone help me do this. I really don't need to do anything to this document after it is saved. I edited it Pro and all I need is Read Only.
df

I modified your vi to let you do data collection at any interval you want. The attached two files include the changes, Test vi is the one I used to test the vi functionality. The other method that I mentioned in earlier post is for continuous data acquisition, I'm not sure that will be of any help. Note some other changes made to your original vi.
Attachments:
modified_Tigear_Test_Setup.vi ‏80 KB
modified_Tigear_Test_Setup2.vi ‏86 KB

Similar Messages

  • What format are the .tmp files created by hp scanner deskjet f2400?

    What format are the .tmp files created by hp scanner deskjet f2400?  I had a customer get the dreaded "out of space" error after scanning over a hundred pages that she was going to have all in one multipage pdf.  So all that work was gone (each page was a painstaking layout of multiple elements, etc.), except for the hpfAAAA.tmp files. 
    I'm trying to recover the data.  I should say, the data is now recovered, but now I must figure out a way to use it.  How can I open these HP .tmp files?  What format are they saved in?  There is no human-readable header to give me a clue.
    If anyone can help me, it would be much appreciated.  You will be saving a very nice woman many hours of work duplicating what she already did.  Thanks,

    Hi LC475, 
    There would be no way to read the .tmp file. Unfortunately she will need to free up space on her hard drive before attempting to scan the documents again. 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I have several Files created in Logic Audio for windows bfreo v 5 wich  can't open in Logic Pro X. Any ideas for a solution to his problem,

    I have several Files created in Logic Audio for windows before v5.5.1 which  can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK.  I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
    Swingtones

    If you can open the windows files  in windows you can bounce the tracks out as audio. Then load them in X

  • I have one file ss_fpga.rbt,abcd.txt how to know the details of the file

    i have  one file  ss_fpga.rbt,abcd.txt how to know  the details  of the file  (when was the date created ,when was date modfied,owner) any function is there like   GetFileInfo

    Yes there is some, called stat(), look the links in your post in stack overflow, there is a lot of link in the anser.
    They talk about sys/stat.h a C header, witch contain the stat() function.
    stat() return a lot of things (size, changes, access etc) about files. look the "here" everywhere in the Yann anser, UP his anser and put the subject as resolved.
    Thanks,

  • I have two different itunes music files on my computer.  How do I combine them into one file?

    I have two different itunes music files on my computer.  How do I combine them into one file?

    I don't think so. The only other ID I have is a developer id, and I didn't get that until several months after I got the phone. In addition purchases I made from the App Store onthe phone would sync up with It unes on the Mac meaning it would be the same id.
    However I looked at the AppStore on my phone while it was connected to the Mac with iTunes open, and now the balance has changed to the same as the others.

  • I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

    I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

    Hi Craig
    Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
    You could try restoring from a backup, and choosing an older backup perhaps
    Cheers

  • Is it possible to have media files copied to a new location as you import them into a project?

    I have roughly 800gb of footage i've taken over the past 2 years of traveling, and I am making a single video montage... The files are located on an external drive, making them slower to work with. I have a 1tb ssd but not enough free space to copy all the files to it for sorting. What i want to do is have the files copy over to the SSD as i add them to the project, so that only the footage i'm going to use gets copied over to the SSD. The only way i can determine if i am going to use the footage or not is to scrub through and mark Ins and Outs in premiere...
    So i guess my question, in the simplest terms i can ask is, Is there a setting in Premiere, like the project manager tool which allows you to consolidate used media files to one destination, but one that will consolidate files as you add them to the project? or could i do this manually by repeatedly using the project manager tool to consolidate files periodically?
    Hope that makes sense...
    Oh, and yes, i have considered other methods to my madness, like reviewing the footage outside of premiere before deciding if i will use it or not, frankly, i have over 4000 pieces of footage and it's just much faster to scrub through them in premiere than to open each one in vlc to review. It's also much more convenient to mark my ins and outs as i review the footage, so premiere is my only option.
    Thanks!

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to a new computer

  • My computer crashed, I recovered all my itunes files, I have them on a file on my new computer, How do I connect them to my newer version of itunes on my new computer?

    My computer crashed, I recovered all my itunes files, I have them on a file on my new computer, How do I connect them to my newer version of itunes on my new computer?

    Any music purchased through the iTunes store can be downloaded again for free as long as you are signed in with the Apple ID you used for the original purchase.  Any other music you had in iTunes should be easily accessible in your system back up or from the CDs you ripped from originally.

  • I have created a slideshow. How do I save it as I would like to incorporate it in a dvd I am making in IMovie. Hope someone can help. Thanks

    I have made a slideshow in IPhoto. How do I save it? I want to incorporate it in a dvd I am making in IMovie. Hope you can help.
    Thanks

    Export it - that makes a  QuickTime movie of it - and import to iMovie
    Regards
    TD

  • I have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

    i have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

    what is WP files?
    You want to always use iPhoto with a default referenced library (the preference to copy imported item to the iPhoto library is checked) ad then delete the source photos
    LN

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • I recently had to get a new computer, my list of audible books is there but can't open because original file cannot be found.  how do I find them or redownload them when they are not in my purchased list anymore?

    I recently had to purchase a new computer, after doing so I no longer can open my audible books.  the list is there, but I get an error message telling me that the original file cannot be found.  How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • Files gone from desktop. How do I get them to show back up?

    All my files have disappeared from my desktop, but when I look under finder and desktop all my files are still there. How do I get them to show up back on my desktop? Is there some button that I hit or some shortcut to use.  New to Mac and not sure what I did.

    Do a backup. 
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Prefrerences/com.apple.desktop.plist and com.apple.finder.plist.  Move the .plists to your desktop.
    Re-launch Finder by restarting and test. If it works okay, delete the plists from the desktop.
    If the same, return the .plists to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

  • I have older versions of lightroom and photoshop, how do i reinstall them

    I have older versions of lightroom and photoshop....how do i re install them?

    I purchased online and have all serial numbers.  when I go under my account I see all items I purchased but theres no way to click on them to redownload.......
    Whats next step????
    Date: Fri, 27 Dec 2013 14:33:41 -0800
    From: [email protected]
    To: [email protected]
    Subject: I have older versions of lightroom and photoshop, how do i reinstall them
        Re: I have older versions of lightroom and photoshop, how do i reinstall them
        created by ssprengel in Photoshop General Discussion - View the full discussion
    Do you at least have the serial-numbers for them?  Did you buy discs or download them?  What versions, specifically?
    If you purchased them as downloads from Adobe, they may be available under My Purchases (or whatever it is called, exactly) if you log into www.adobe.com and check the My Account area, then look at the products you’ve purchased.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5960695#5960695
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5960695#5960695
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5960695#5960695. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop General Discussion at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HT4436 we have 5 devices on one itunes account how do I give them each their own icloud account and still share the itunes account?

    we have 5 devices on one itunes account how do I give them each their own icloud account and still share the itunes account?

    You need a unique AppleID for each iCloud account.  So grab some free gmail, hotmail, aol, yahoo or whatever email addresses to make five new AppleIDs.  Now, everybody make an iCloud account for themselves, and keep the existing shared AppleID and password just for use in the iTunes and App Stores.  You can also each use your own unique AppleIDs to make iMessage accounts and keep those separate as well.

Maybe you are looking for

  • AC 10.0 - New Documentation in BPX

    Hi everyone, We have been publishing a lot of guides this year in our BPX website (http://www.sdn.sap.com/irj/bpx/grc), I would like to share with you some of the new highlights of the last month: New version of the PC+AC Integration guide AC and Net

  • Role Transports

    Hello, I transported Roles (BI 7.0) by collecting objects in Transport connection to QA system, but I eneded up regenerating profiles for all of them. Is this is normal? OR is there any difference directly clicking Transport buttom from PFCG screen?

  • Setting date in x-fi2

    I'm having trouble setting the date in my new zen x-fi2. I can set the day & the month but not the year. How do I avoid being stuck in 2009?

  • Where do we use the three users created during BPC installation

    Hi Experts, I just want to know where we use the three users we create during installation. Because without  AppSet the users cannot log in. Though we map three different domain users in "UJA3_WRITE_SYS_USERS", except the user BPC_SYSADMIN, I think w

  • UCCX 8.0 SU4 Data Check

    I've just upgraded from UCCX 7.0 to version 8.0 this weekend and when I do a Data Check I get User and Network Audio Source -- UUID cahnged from (long hex string) to (long hex) string.  This is also shows the same thing in the VoiceMailProfile sectio