I have Photoshop CS2. Using Win7 [32bit]. Unable to use Transform & Free Transform, (faded print).

I have Photoshop CS2. Using Win7 [32bit]. I am unable to use Transform & Free Transform, (faded print).
It has been available to me up to now. I have tried all I can think of to bring it back.
Hoping someone out there can help, thanks.
Regards, Patrick.

Thanks for your early reply, most appreciated.
Firstly, I downloaded the screencast.com, which I failed to understand
at this time.
In your e-mail you mentioned about Layers palette being visible. I
should mention here that I have never used Layers and I've had  my CS2
since 06/2005. I have only used the basics but would have liked to have
experimented with all that's on offer.
Anyway I went to Layers  and clicked on New Layer, the went back to
Tranform and Bingo!, it was up and running.
You are a genius for putting me on the right track, I've been without
Transform/Skew & Warp for nearly two years!
Thanks again.
What do I do now do I goto the Forum or does this e-mail get sent to there?
Regards, Patrick.

Similar Messages

  • I have Photoshop CS2 but I had to get my computer fixed which means I lost it..when I try to download it from the website it stops at 173of340...I have my original cd is there anyway I can use it and put in a different serial number

    I have Photoshop CS2 but my computer crashed on me which means I lost it..when I try to download it from adobe web site it stops at 173/340...is there anyway I can use my original CD and then  use a different serial number

    No, you have the web site version because this applies:
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    The rest we cannot know. You have not provided any system information or details like what browser you use, so nobody can help you with your technical issues.
    Mylenium

  • I have a trial version of Photoshop CC. I am unable to use CTRL J, is there a setting I need to do to get it to work.

    I have a trial version of Photoshop CC. I am unable to use CTRL J, is there a setting I need to do to get it to work.

    Should work
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.
    Photoshop menu Help>System Info ... help identify you system hardware and software

  • I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an iMAC. There appears to be no way to contact Adobe about this.  What do I do? Ed

    I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an IMAC and it doesn't work on that either. There appears to be no way to contact Adobe. What do I do? Thanks, Ed

    That because the activation servers were retired. Now for the good news:
    Adobe has provided a non-activation version of Photoshop CS2 free of charge for their CS2 license holders.
    Download the Mac version of Photoshop (not the suite) and copy down the serial number next to it.  Do not use your original serial number or cs2 disc.
    Download Acrobat 7 and CS2 products
    Uh... one more thing CS2 is PPC only.  OSX 10.6.8 has Rosetta to run legacy PPC products. 10.7 and above will not.
    Good luck,
    Gene

  • I have photoshop CS2, wanting to adjust the skin tones

    I take photos of clothing for a on-line seller.  I have been using a Nikon D-200 which seems not to like the various blues of jeans. When I adjust the color of the the jeans, it of course changes the skin color. How could I isolate the skin for color correction. Any ideas would be much appreciated

    Hi John, Thank you for the tip, I will practice the methods you suggest.
    Sincerely,
    Cherie
    Cherie's Designer Boutique
    Direct Website; www.cheriesboutique.com
    eBay Store; www.ebaycheries.com 
    (Monthly Special)
    *ADD 2 or More Items To Your Order And Receive An Additional 15% Off Our Already Low Prices By Entering The Following Promotion Code On Checkout - CDBDC2 To Qualify You Must Have 2 Or More Items In Your Order and The More You Buy The More You Save So Its A Great Opportunity To Stock Up On Your Favorite Designer Brands!!
    Date: Fri, 27 Nov 2009 17:57:21 -0700
    From: [email protected]
    To: [email protected]
    Subject: I have photoshop CS2, wanting to adjust the skin tones
    You've almost answered your own question.  You'll need to "isolate" the skin areas in your photograph(s).  This is a tedious process that takes some getting used to.  I tend to use the "lasso" tool, but you could use something like the "magic wand" tool.  If it's the jeans you want to manipulate, you'll have to "select" them separately.  I'd get the selections and then save them separately ( Selections > Save Selections ).  You might want to post this in the Photoshop section of these forums and see what they come back with over there.  Up until now, it sounds like you're color correcting the entire photograph, so nice blues, but not so nice skin tones.  Makes sense to isolate them from eachother, no?
    >

  • I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this?

    I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?

    You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
    PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
    PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

  • I have photoshop CS2 on a mac 10.6.8 OS. I want to upgrade to Yosemite OS (10.10). Will photoshop work on the new OS? Is there an upgrade available if needed?        toshop keep working? Can I reload it  if needed?

    I have photoshop CS2 on a mac 10.6.8 OS. I want to upgrade to Yosemite OS (10.10). Will photoshop work on the new OS? Is there an upgrade available if needed?    Can I reload it  if needed?

    Photoshop was the last version compiled for the PPC cpu, not Intel. 10.6.8 kept it going with the Rosetta emulator, gone since 10.7.
    So, no CS2 won't work under 10.10
    CS6 (permanent license) or Lightroom and Photoshop | Adobe Creative Cloud Photography plan is the way to go.
    Gene

  • I have Photoshop Elements 4.0. Can I use it on a windows Vista based computer

    Q. I have Photoshop Elements 4.0. Can I use it on a windows Vista based computer.

    Mac OS Extended is not an OS, it is how the drive is formatted. This format will not work with a PC. If you reformat (erase) the drive with a PC format, it will work with a PC.

  • Photoshop cs2 student version, can it be used for commercial use?

    Some years ago I bought an Adobe Photoshop cs2 student version. Can it be used for commercial use now?

    Hi Bob,
    Another guy posted on the thread:
    "Yes, if you are in the United States. Maybe in other countries."
    So if I am from Denmark, does the "Yes" still apply?
    -Asge2000
    Date: Sun, 13 Nov 2011 12:03:51 -0700
    From: [email protected]
    To: [email protected]
    Subject: Photoshop cs2 student version, can it be used for commercial use?
    Re: Photoshop cs2 student version, can it be used for commercial use? created by Bob Levine in Creative Suites Windows - View the full discussion
    Yes.
    Bob
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4022953#4022953
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4022953#4022953. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Creative Suites Windows by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop CS2 on Windows 7 - unable to boot up after installing

    Hi everyone, I really hope anyone can help me with this!!
    Ok, I've always used Imageready CS2 to open avi files to edit then save as animation GIF without affecting quality (which part of PS CS2 that I did pay for) on my old laptop with Windows XP in the past.
    Since then I've got a upgrade to PS CS5 (paid for) which I've installed successfully onto my new laptop with Windows 7 but till now, I'm dismayed to find that I'm unable to open avi files in PS CS5 just because I have 64 bit, not 32 bit even though I couldn't find the 32 bit program anywhere (apparently I found the 32 bit by searching in start up button but it still opens as 64 bit?).
    So I thought I'd try installing PS CS2 into Windows 7 using my CD and found that the activation part doesn't work anymore which leads me to finding that I could download a copy of PS CS2 without the activation bit (yes I did the uninstall before installing PS CS2 without activation) everything was great BUT...untill I tried booting up my laptop next time, it wouldn't start up properly at all, it would only manage it to that Boot Screen Animation then blackness with the cursor in the middle or rarely to the log on screen that doesn't work but thats it so I had to do a system restore to get it back in working order minus the PS CS2
    I thought it was the fault of other things I've downloaded at around same time like xvid decompressor codecs (so I could use VeeDub64) so I downloaded the codeces from different source and restarted to see if it boots up ok (it did) so I tried installing PS CS2 again but same thing happened on restart - failure to boot up and I had to do a few system restores (as some of the points didn't work ) before I barely got it back in working order yet again....
    I see that some people have PS CS2 that works perfectly on Windows 7 with 64 bit because they changed the file path when installing the program? Or was I supposed to have the 32 bit program somewhere although maybe I don't have it since my PS CS5 is not extended? Would either of those work? To be honest, I'm quite reluctant to try as I may end up killing my laptop this time around and it's only around 2 years old!!
    Any help would be MUCH appreciated!

    I'm happy to report that I've managed the resolve this issue of mine
    After a little discussion with customer support through online chat today, I was still advised to try the uninstall and install to see what happens.
    So I used the CC cleaner tool first, restarted then started by installing CS2 then CS5 using my serial numbers and made sure that I selected 32 and 64 bit programs to be installed
    Anxiously, I restarted my laptop to see if it would reboot okay and thankfully it did *relief!*
    Now I can open avi files using 32 bit of Photoshop CS5 without any problems (thank goodness!!)
    I think I probably didn't install the 32 bit program when I first bought the installation CD, since I thought I didn't need it but never knew it was still required for editing avi files!!
    Surprisingly, I still got to keep both versions of CS2 and CS5 this time around, as CS2 was simply replaced by CS5 when I first installed it two years ago....hmm.
    So thank you again gener7!

  • (Photoshop CS2) It crashes every time I use my brush tool for a long time. Help?

    Hi,
    I have recently been having some trouble with my photoshop cs2 (it isn't my computer because it is easily quicker them the majority of computer I have been on and it's only a recent problem). I can use all my tools very easily without having any little pauses and it wont crash, but with my brush tool, after using the brush for a long stroke without unclicking it crashes. Well, it pauses for 2 mins- 4 hours (wont let me click on another tool or carry on drawing or select layers and such). Since I am an artist and work on photoshop for a living , not being able to use the brush tool is a huge problem for me. I have no intension of updating my software to cs3/4/5, (as I don't want to pay for all that software and then find that it crashes again). I recently got my new bamboo graphics tablet and it is even slower when using that. This is also a very recent problem so I was wondering if anyone else had had this before and found a way around it?
    Thanks!,
    -Lithia

    I actually believe there are updates for Photoshop itself, not through Mac Software Update.  You should check if there are any updates for the product on this website.  Photoshop also tends to glitch sometimes.  For example, on PSCS4 for Mac, after opening the program, and changing the toolbar to the traditional 2-column style, the quck mask button is totally cut off unless I switch it to the 2-column style twice.

  • Photoshop CS2 on Win7 Activation Server no longer available as CS2 not supported

    My XP PC died and was replaced by Win7 Laptop.  Loaded my legitimate Photoshop CS2 software, but Activation Server no longer available as CS2 not supported any more.  Need to run my CS2, so how do I make this happen?

    As for the Activation Server please read this
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    As for whether CS2 and Windows 7 play nice I don’t know, what with being a Mac user …

  • HT5035 I have a balance of £11 but unable to use it, why?

    I have a balance of £11 but seem to be unable to use it, why?

    No idea.
    What happens when you try?
    Error message?
    What does it say?
    Any info?

  • I have a poster sent to me created in illustrator and I have photoshop cs2.  I used the same dimensions from the original to create the poster in cs2.  After creating the poster in cs2 using images and texts from the original poster, I printed it off and

    So there is a lot of white space at the top and bottom of the page when I print off poster.  When I see the poster on the canvas on cs2 it looks how I want it to!  I am confused!  Help pls.  Also I am new to photoshop.
    When I sent the finished poster to the person I needed to send it to, it wasn't printing out how we wanted on A4.

    What system? What printer? What print settings? Most of that has nothing to do with teh Adobe apps, but your printer's capabilities and nobody can advise without that info.
    Mylenium

  • I have Photoshop CS2 vsn 9.0 with the Camera Raw 3.7 update and the Digital Negative Converter.  I cannot open any RAW files. Does the fact that I've opened them in Lightroom 5.0 before make a difference?

    When I try to open the RAW file (CR2) from the Photoshop application or from the Bridge (even while holding down the shift key) I get a message saying it's not the right kind of file. When I try to convert using the converter, it won't recognize the files.

    Which operating system are you using?
    Which camera are the camera raw files from?
    Did you convert the files to dng using lightroom or the standalone dng converter?
    If using the standalone dng converter, which version?
    In the dng converter did you try setting the Compatibility for Camera Raw 2.4 and later
    (Preferences>Compatibility)
    You should also be able to send the files from lightroom to cs2 without converting to dng, either by using Photo>Edit In>Photoshop or setting cs2 as an external editor in the lightroom preferences

Maybe you are looking for

  • How do I read this "standard" table in my Function Module?

    I have a remote-enable Function Module (RFC).  I am receiving two tables as part of the parameters.  Table "A" is header information, and Table "B" is detail information.  So for every 1 "A" header record, I may have 1 to many "B" detail records.  I

  • Output XML with a default namespace using XQuery

    I'm having a problem with namespaces in an XQuery within ALSB. We receive XML from a file which doesn't have any namespace and have to transform it into a different structure, giving it a default namespace such as below: Input XML <inputRoot>      <i

  • I have a line across of blank pixels across my screen

    There is a line of pixels on my screen that goes black when the backlight is on but when the backlight is not on it works just fine. I did not drop it or anything, I just plugged it in to charge and when I went to disconnect it the line of pixels did

  • How to Create Billing rule.

    Dear Friends, I need to create new billing rule. I didn't find T code and menu path in SPRO. Friends please suggest me the same. Thanks & Regards, Ramana.

  • Unknown Author/Book missing on Nook

    I am recently finding two problems with my nook & ADE. First, library books generally come over as "unknown author" on the nook's "my documents" list. There does not appear to be a way to edit this in ADE. Second, when the nook is connected to ADE, b