I have placed a theme but I don't like it, how can I remove it?

I upgraded my firefox and saw that I could place a theme, I did it because It sounded nice, but I don't like it at all. Can you tell me how to remove it?

Hi, you can find out how to switch and remove themes in the article [[Using themes with Firefox]]

Similar Messages

  • HT2204 i have set a password to log on to my ipad but i don't remember it. how can i retrieve

    i have a password set to for my ipad but i don't remember it. how can i access it/

    You will need to restore your iPad, take a look at this link, http://support.apple.com/kb/HT1212

  • Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this

    Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this???

    You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (107400)

  • I upgraded my phone to 7.1 but I don't like lay out can I go back ?

    I upgraded my phone to 7.1 but I don't like lay out can I go back ?

    Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
    http://www.apple.com/feedback/

  • I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

    I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

    If by "charger," you mean the USB docking cable, you need the original cable (or a compatible third-party replacement cable).  A cable that is for the current 4th gen (and 3rd gen) shuffle does not work with a 2nd gen shuffle, because the connector is different.
    This is the Apple replacement part (for a 2nd gen shuffle)
    http://store.apple.com/us/product/MA694G/A/apple-ipod-shuffle-dock
    There are third-party products that work, but make sure it is described as being for the 2nd gen shuffle.  And I would avoid the ones that just seem too cheap, because there are likely to be quality issues.

  • I have downloaded an application that i don't like at all can i get a refund ?

    I have applyed an app that i don't like at all is there a way i can get a refund . Apple should let you look at an app before you purchase it

    Before getting the app, you should look at the screenshots they provided before buying.
    iTUNES STORE - TERMS AND CONDITIONS
    All sales and rentals of products are final.
    Prices for products offered via the Services may change at any time, and the Services do not provide price protection or refunds in the event of a price reduction or promotional offering.
    If a product becomes unavailable following a transaction but prior to download, your sole remedy is a refund. If technical problems prevent or unreasonably delay delivery of your product, your exclusive and sole remedy is either replacement or refund of the price paid, as determined by Apple.
    However, you can try this trick:
    How to Get a Refund from iTunes | eHow
    Hope this helps.

  • I am trying to buy an album, but my apple ID has been disabled. I have changed my password, but that has not helped. How can i get my apple ID re-instated?

    I am trying to buy an album, but my apple ID has been disabled.  I have changed my password several times, as instructed, but that didn't help.  How can I re-enable me apple ID?

    hi
    i have same problem from few days .the coustemer support advice me to contact the apple servises in the nearest countory ( i m Naw in Iraq). but the numbers avilable ae availabe for Suadia arabea and UAE just to call from inside
    any body help me by provide me number of any apple servisees i cnt reached from here Iraq ....please ?

  • The links toolbar is not working. I can drag addresses to it, but when I click on them, the sites don't open. How can I fix this?

    There is a toolbar feature in the lower right corner of the taskbar. I tried to set up the Links toolbar. I can drag addresses to this, but when I click them, nothing happens. What should happen is the site/page whose address I clicked should open.
    How can I fix this? Is it a problem with the Firefox I'm currently using?

    I checked out the links you provided. One is dead, one is for Windows 7, which doesn't apply to my problem because I'm using Windows 8, and I've been checking out the third.
    I'm a novice and may not have the right vocabulary to explain myself. The Links toolbar is accessed from the bottom right side of the taskbar at the bottom of the screen. Apparently Firefox is necessary to use this, as everyone I've talked to swears it's not visible for IE.
    What I'm referring to is Right-click "show hidden icons." Scroll up to Toolbars. Scroll over to Links. Check it to enable it. Then what should happen is I should be able to drag the address/url from the top of the page to this menu and click on it when I want to go back to that particular page. That is what is not working. Nothing happens when I click the addresses in the Links menu.

  • I have a wi fi network which is bell675, it is asking me for a password but i don't know it, how can i get a password

    how can i get a password for wi fi network BELL675

    There's no way anyone here will know the password to that network. If this is your own home network, the password would be whatever you set up on the WiFi router. If you've forgotten it, you'll have to reset the router. Consult the router documentation. If this is a commercial WiFi network you're trying to access, contact whoever runs the network.
    Regards.

  • HT1766 i have create new notes but it has disappeare all notes how can i retrieve all my notes

    I have created some new notes on my new iphone 5s but it has disappeared how can i retrieve it back

    Go to Settings- Notes.  What is showing as the default account?  If your email address, go to the desktop version of the email and check the Notes folder.  Yahoo and Gmail accounts will create Notes folders.  Of the setting is just the phone, there would be no way to retrieve them.  If the default is I cloud, contact Apple Support.

  • I've,just,bought,a,new,Mac,with,mavericks,,but,I,don't,like,mavericks,,how,may,I ,downgrade,to,Mountain,Lion,10.8.5?

    I've just bought a brand new iMac with OS X Mavericks but I dont like Mavericks and it also has problems with some apps I use, how may I downgrade to Mountain Lion 10.8.5?

    You can't.
    You cannot install or run an OS X version lower than what is, originally, installed on your Mac.
    Your only option maybe to purchase a download code for OS X Mountain Lion here,
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    Purchase a high quality USB 3.0 or Thunderbolt hard drive, formatted as an OS X exetnded (journaled) drive with a GUID partition scheme and install OS X 10.8 Mountain Lion to the external drive and boot and run your new iMac from this external drive.
    This is the only optioh to run an older OS X version on a new Mac.
    I have a 2009 iMac that the lowest OS X version I can run from the iMac's internal hard drive is OS X 10.6.1.
    I have an external drive with OS X 10.5.8 and can get my iMac to boot and run this older OS X version from the ex eternal hard drive.
    Here is a good source for quality external hard drives.
    http://eshop.macsales.com/item/Lacie/9000353/
    http://eshop.macsales.com/item/Lacie/9000303/
    Your only other option is to return your new iMac within 14 days for a full refund and look for older iMac, either new or used that came with OS X Mountain Lion as its original, preinstalled OS X version.
    Good Luck!

  • HT1933 I have downloaded a song, but it won't play. How can I fix this?

    Hi,
    I recently downloaded a song and it appears on my songlist, but will not play when I press it. Just checked to see if I still had my email receipt, but I must have deleted it by accident.
    How can I get this resolved?
    Thanks,
    Annie

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • TS2951 I installed Maverick on my computer cause it kept asking as an update don't like it how can i go back of what I use to have

    I Installed Maverick on my computer cause it kept asking me as an update to the computer I dont like it and if i do something on my I Pad it happens on my computer to how can go back

    Hopefully you made a backup.
    This is what I had to do to rever to Snow Leopard from Mavericks:
    make an appointment with a genius at an Apple Store
    they had to do a deep wipe (not the exact correct term, but deep was part of it) of my iMac, then reinstall Snow Leopard over top of it.  We tried to restore from backup during the install process, and ended up in a total mess.  So we had to start over and do another deep wipe, then they reinstalled Snow Leopard for me.
    You need to bring some proof that you own Snow Leopard with you, then they will install it for free (and do it much faster than you can, because they install the latest version straight away

  • I don't like Leopard How can I go back to Tiger?

    My computer keeps freezing up and some of my software won't work.... HELP!

    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you may need from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Have recently acquired an additional black MacBook, and installed Snow Leopard onto it. Trying to get it to connect via a plug-in USB wifi unit (poor reception on Airport) I have an extra Network Location which does not work.  How can I remove it?

    Need to get a second hand black MacBook connected.  Poor reception on Airport so tried a plug in wifi aerial. That didn't work, but now have  a Network Location I can't get rid of.  How do I remove it ?

    Hello my ginger,
    I tried what you suggested - but to no success.  The problem came up when I was re-entering the new settings.  If I left it as using DHCP it would run for a few seconds with no IP address, then drop in a 169.254 one which would not connect through.  To overcome this I tried using the 'Using DHCP with manual address' option and entered in an address which it had set up from the clone boot.  This appeared to be okay.  When I then tried renewing DHCP lease sometimes that address held.  When I tried connecting though - no sight of the internet, and the exclamation mark was across the wifi icon in the menu bar. If I switched it to Using DHCP it would randomly fall back to the 169.254 address. 
    The only significant differences I could see when cross checking all the settings info was in the WINS panel the NetBIOS had a slightly different configuration of the name - but as they ended in the same numbers I assumed they were the same.  And, when looking under Keychain Access, in the System section list (it also appeared in the login section) additional info box they had different locations - 28 characters in four groups.  I don't have a clue what this refers to.  Also the allow access list in the boot clone included System Preferences, but did not in the Snow Leopard boot, so I added it in.  With no success. 
    I am so frustrated I am thinking of giving up.  I seen have loads of postings on the net about a variety of problems with wifi connection on Snow Leopard.  I have version 10.6.3.  Did it get any better in later Snow Leopard ?  Or in any of the OS s after that ? It was always so easy and so solid under Leopard - why the h**l did they change it ?

Maybe you are looking for

  • Not getting all the attributes value from Trusted Recon in eventhandler

    Hi, I am not getting the values of all the attributes in hashmap from Trusted recon in eventhandler. Following is the hashmap value I am getting : Parameter Hashmap value is {re_key=1869, Email=[email protected], Role=Full-Time, act_key=22, User Logi

  • Nikon D810 support for lightroom 4.4 ?

    I just installed an update to Lightroom 4.4 and it seems like the Nikon D810 is still not supported. Is this correct? I'm trying to shoot tethered. Thanks

  • Help in Apex 3.2(Application Migration)

    Someone can help me with the specific steps to do a migration of an Application in Apex3.2. I have a lot of errors when I use the option "Export Application". Thanks for your attention.

  • Every time I select a title, FCP crashes

    I searched and couldn't find anything... but I was working on this project for 3 hours and when I added a title slide at the end, every time I select it... FCP crashes. I tried rebooting, everything... I even tried moving the files from my scratch to

  • Final Cut Pro, doesn't launch after updating to 5.1.4.

    Hello there, I tried opening an older project with the version 5.1. but it only gave me an GENERAL ERROR 41. Then I downloaded the update to 5.1.4. and the application doesn't event want to launch anymore!! What can I do, what else could've gone wron