I have PR cs6 and my mac has recently upgraded itself from iPhoto where i imported all my photos and film from to "photos" now all of my current project is showing 'media offline' AAAAARGGGH!! now i can't see anything. the audio is fine but everything els

can anyone help me get all of my edited holiday video visible again? my mac upgraded itself from iPhoto where i keep my imported video and photos, to "photo" now all of my current project (and probably old ones as well! ) are showing media offline. how can i get this back seeing the clips on 'photo'?

When you open a project you need to point PPro to the new media location and relink
>mac upgraded itself from iPhoto
THAT is not good... I am Windows, but at least a Windows update gives ME the option of unchecking an update

Similar Messages

  • I have installed the new OS X Yosemite and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else.

    I have installed the new OS X Yosemite on my macbook pro and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else.

    Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.

  • Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

    I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone  online in Canada but have a Hong Kong simcard. Any solution to connect to network?

    I bought mine in the US and activated using a German SIM.  It worked fine first on 6.0.1.  After upgrading to 6.0.2 the SIM does not work.  I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device.  I am being told by the Genius Bar team that this is a Hardware failure.

  • Since last night I can open email but not the body of it, nor can I type anything in a new message. Everything else looks normal.

    Since last night I can open email but not the body of it, nor can I type anything in a new message. Everything else looks normal.

    I am having the same problem. As recently as this morning, I could read entire hotmail emails on my iPhone 4  now, I can see only the sender & subject. What us up? Any solutions? Thank you.

  • I dropped my computer and the screen cracked and now I can't see anything. I am using an adapter to hook it up to a monitor to see if the computer still works. All I see is the welcome screen without the login window. How do I bring that up to log in????

    So yeah, I dropped my computer and nothing comes up. I'm using an apdapter to use a monitor I have to see if the computer still works. It shows the default picture of Leopard galaxy thingy but the login window doesn't come up so i can log in. What do I do????

    I assume this is due to the fact that system detects your internal monitor as default one, and that is there where system sends main data. In order to force system send data to the external monitor, get a mouse and physical keyboard, close MB lid, and then press any key on the external keyboard.
    when you get there, go to system preferences/display, and manually move the Apple upper bar to the external monitor, then choose mirror; ultimately, set optimal resolution.

  • I set my apple TV to 1080i and now I can't see anything on the monitor to change the setting back

    I used the 1080i setting on my apple tv and my television sent a message back saying it was receiving an incompatible signal. Okay, fine, but now the tv stays blank. How can I return the apple tv to the 720 setting that worked before?

    Try pluging the device into some other 1080i compatible device.   Is this an option?
    Also,  "Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution."
    http://support.apple.com/kb/HT1551
    Cheers!

  • Podcasts and tv shows videos stop and start when playing.  The Audio flows fine, but video freezes for a moment and continues.  Do you know what I can do to fix?

    When watching a podcast or tv program on itunes the video freezes and starts.  The audio still flows just fine.  Do you know what the solution might be?

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • I can't delete my older version of Itunes but everything else deleted... : S

    Hi, Im desparete...I really dont know what to do, I tried to download PC clean up, didnt work, tried to download the new I tunes, doesnt work,,,
    I have deleted everything else (quicktime, etc. etc) and always gives me the following statement; the feature you are trying to use is on a network resource that is unavailable.  what can I do????
    Thank you!!! so muchhhh!!!!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • CS4 rendering and the audio is fine but the video freeze half way through

    Hi I need your help
    I am using Premiere Pro CS4 on a MAC,
    We have a project that is using multicam editing of footage from 2 cameras. the footage is fine in the timeline when you move through the time line the footage is 2hours 20 min when edited.
    When rendering this out it takes about 9 hours when you play footage back it stops at the 43 min mark the audio continues but the video freezes on the frame for the rest of the footage.
    We have rendered a small clip 5 mins ether side of the footage where this happens and the footage is fine when played back.
    Do you have any ideas as to what I can do
    Rodney

    Rodney,
    The first thing that I would look for would be a gap in the Video, and especially in that 43 min. range. Even a 1 Frame gap can cause issues. I find that gaps can be tough to spot, even when the Timeline is zoomed into the frame-level. I use the keyboard shortcuts, PageUp & PageDn, to step through the Clips. The CTI (Current Time Indicator) should jump smoothly from Clip to Clip. If you encounter a little hiccup, or pause, you have likely found a gap. This is the first thing that I would rule out. If there are no gaps, then something else seems to be happening at that 43 min. mark.
    To rule out another possibility, though a remote one, are you Exporting to an external HDD, that is perhaps formatted to FAT-32 (max file size ~ 4GB), which is the normal format for an external to go between a Mac and PC, as the Mac cannot yet use the NTSF format. Like I said, this is not very likely, especially as your Audio keep playing.
    Good luck,
    Hunt

  • I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

    I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

    Hi jeffbeal,
    First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    Hopefully this helps!

  • Changed my Virgin to Sky, now I can't see my Shared Drive. Why?

    Hello
    Got a Seagate Central as my shared wireless drive.
    Worked fine until we got rid of Virgin and replaced with Sky.
    Now I can't see the Shared Drive wirelessly. Only works when I connect via Ethernet.
    What am I doing wrong please?

    You will have to talk to the Sky technical people about this.  As you are replacing a previous system (in effect) they should be able to confirm their way of meeting your needs.

  • Timeline thumbnails show media offline, but media is not offline.

    Short version: I opened a project today that I had been working on for a long time. Some of the thumbnails in one of my timelines show up as the red "Media off-line" image. But the media is not off-line. I can play the clips just fine. Everything else seems (more or less -- see below) normal except for a handful of these off-line thumbnails. It's not a disaster, but it makes it hard to find my way around. And I'm worried that it's a sign of something more serious wrong under the surface.
    Long version: I'm using an older Macbook Pro with an ESATA expresscard. My media is all on external ESATA drives. My project file is on the Macbook's internal hard drive.
    I use my Macbook as a desktop machine. The computer sits on a dedicated shelf on my desk. My cat makes a habit of sleeping on top of the machine. (You can probably guess where this is going.) Most of the time this is not a problem, but about a week ago he decided to stretch in just the wrong way and pushed the expresscard out of its slot. After screaming and throwing the cat across the room, I saved the project file, remounted the disks, re-opened the project file, and breathed a big sigh of relief when everything seemed to be fine. I quit FCP again and put the project on hold for about a week.
    Today I reopened the same project file and the trouble started. At first all the timeline thumbnails showed up as media-offline, even thought all indications were that it was on-line. In addition, all my audio and video renderings were gone. I re-did them, and after a while some of the thumbnails restored themselves as well. But not all of them.
    All of which has me a little flustered.
    Has anyone encountered anything like this before? Is there a way to force FCP to refresh the timeline thumbnails? It's hard to find my way around now that all the clips look the same.
    Thanks.

    i've experienced this before, but i can't really remember how i sorted it,
    i may have deleted the thumbnails out of the scratch disc, or it may have been that i switched the timeline view to name only saved and closed down, then opened it up again and switched them back on to refresh
    but i know on no refresh thumbnails button in fcp itself

  • I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?

    I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?

    SinluFrank wrote:
    already tried all suggestions from the support page, except re-installing Itunes.  any suggestions?
    Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
    However ....  I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
    Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

  • My ipad has died! I was deletng some emails when the email, safari, settings all went dead. Now i can't turn it on. it is charged but i have plugged it in and again have no symbol to say it's charging. What has gone wrong?

    my ipad has died! I was deleting some emails when the email, safari, settings all went dead. Now i can't turn it on. it is charged but i have plugged it in and again have no symbol to say it's charging. What has gone wrong?

    that worked - thank you! Do you know why it happened? did i do something wrong? i was just deleting some emails with attached photos.

Maybe you are looking for