I have premiere elements 9 and it says there is an update but it won't

I have premiere elements 9 and it says there is an update but I keep getting an error saying the update can't update. I've tried several times. It suggested to try support. So here I am. What could the issue be?
Christine Fapp

The error code I'm getting is Error Code: U43M1D207

Similar Messages

HT1338 I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

10.5.8 is the last release for OS X 10.5.
If you want to upgrade your operating system, you have to buy it, and it's not available via download. The next upgrade for you would be to OS X Snow Leopard 10.6. In the US, call the Apple online store at 800-MY-APPLE and order 10.6 from the legacy products list. They will send you a DVD, which you can install, then use Software Update to get to the last release of 10.6.8.
If you want to upgrade further, and your sytsem will support it, you can call the Apple online store again to buy Lion or you can connect to the App Store to buy and download Mountain Lion. If your system will support Lion or ML, you probably should have 4GB of memory for reasonable performance.

My settings icon says I need an update but it won't allow me to install it.

My settings icon says I need an update but it won't allow me to install it.

Have you tried restarting the iPad or resetting it and then try to update?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This should not matter - but at this point you might as well try this as well. Close all apps, restart the iPad and then try to update again.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button. Restart the iPad.

Firefox 3.6.8 says there are not updates but Firefox 3.6.9 does exist.

I have Firefox 3.6.8 on two windows XP PCs. Today I tried to check for updates for Firefox and Firefox said there were no updates. But I read in CNET that there is a Firefox 3.6.9 available. And I checked the Mozilla site and see Firefox 3.6.9 does exist.
Is something wrong with the Firefox updater?

There have been a few people reporting they can not find the update. You can download the full setup file and install it on top of your current version instead.

I can't sign in to my premiere elements. it keeps saying there is an error 400

I can't sign in, it keeps saying that there is an error 400.

avquihuis6
What version of Premiere Elements are you using and on what computer operating system is it running?
I suspect that you are using a Premiere Elements version earlier than 11.
Those versions earlier than 11 are no longer associated with a Sign In. Ignore or cancel out of any messages that ask
you to Sign In. You will be able to import, edit, and export using the program.
The Sign In was associated with "photoshop.com" which has been discontinued within Premiere Elements 7, 8, 9, and 10.
Also note, that the photoshop.com plus members only content is no longer available.
The Error 400 matter is not a new one. How long have you been working with the program that is giving you this Error 400 message
today?
Please supply more details to help us help you.
Thank you.
ATR
Add On...More details on this later if necessary, do not misunderstand any program messages that you may encounter; you do
not have to join Adobe Revel in order to use your Premiere Elements 7, 8, 9, or 10 program.

Updated to PS 2014 for the CC updater in the top menu bar on the Mac, or so I thought but even after restarting I still have older version, despite "about" saying there are no updates. Any ideas?

In the Mac, the updater icon told me there were many updates. I had them all install and they did, supposedly successfully. However, after I opened PS, it's still the old version and if I go to Help and click updates, it says I have the lastest version, yet it's still 14.2 What's going on? Thanks.

This may help ...
I had the CC Desktop App tell me there were new versions available and got both Indesign (CC 2014) and Photoshop (CC 2014). Went to start Indesign and got an error: 1. Suggesting I uninstall and then reinstall. The uninstaller in the app folder had lost its alias link to the original uninstall file so I had to manually find it and un-install. Then re-did installation using the CC Desktop app, and now its starting. So I am doing the same with Photoshop now and have tried starting Indesign and it is now working ... So Id suggest check your application folder and look for a folder "Adobe Photoshop CC 2014" and if its not there then you may well have just updated the existing CC application. The 2014 is a totally new install ...
Regards
Mitch

Adobe Premiere Elements 10 takes about 6 minutes to open but then won't close

My old computer died so I am installing my Adobe Premiere Elements 10 on my new laptop with 8 gb Ram, 1 tb storage and Windows 8.1. When I click on the icon to open it it can take up to 5-6 minutes to open and if it does, when I try to close it, it won't close. I just get programs fails to respond. Can any body help me?

csu
What video card is your Windows 8.1 (assumed 64 bit) computer using? NVIDIA GeForce or other?
Please check the Device Manager/Display Adapters to confirm the video card/graphics card and how many cards.
Is the card driver version up to date according to the web site of the manufacturer of the card?
Are you working from a User Account with Administrative Privileges? And, do you have QuickTime (latest version) installed on
the computer with Premiere Elements?
Are you using a pen and tablet device instead of a mouse?
Does the problem exist with and without the antivirus and firewall(s) disabled?
Please consider the above and then we can decide what next.
Thank you.
ATR

Itunes says there's an update but doesn't appear in app store

Anybody else get this? I have been getting this for a while with iTunes updates... There will be updates available but they never appear in the App Store....

Thanks for the question. That definitely sounds weird and frustrating! Let’s see if we can resolve this issue. To begin, try out the steps in the following resource:
Mac App Store: Cannot update App Store purchases or updates do not seem available - Apple Support
http://support.apple.com/en-us/HT203604
My startup volume was not listed on the Privacy tab in Spotlight.
Additional information:
Troubleshooting the Mac App Store - Apple Support
http://support.apple.com/en-us/HT203421
Sorry, but that link was useless. None of the suggestions in that link are valid.
If an app purchased on one Mac does not open after being copied to another Mac
I did not "copy" iTunes from one Mac to another.
If you are unable to find an app you purchased from the App Store
I didn't buy iTunes in the app store, it was pre-installed on my MBP just like everyone else's. And I don't have a problem finding iTunes, i use it all the time.
If the Mac App Store application was removed after installing the Mac OS X v10.6.6 Combo Software Update
Don't even have a clue what this refers to. I am running MAC OS X v10.10.2.
If nothing happens after clicking Buy when purchasing an app
This is irrelevant. Again, I did not purchase it from the App Store.
If downloading an app is interrupted
Again, irrelevant, i have not even downloaded it yet and none of the versions i ever downloaded have ever been interrupted.
Mac App Store: Unresponsive after clicking Updates icon - Apple Support
http://support.apple.com/en-us/HT203425
And this one? Where in the world did you come up with this one? I do not use boot camp and do not have NTFS files that are causing this....
Sorry, but that was the MOST unhelpful post I have ever received here in the communities.....

App store says there is one update but none need updating

I just upgraded to Yosemite and under my Apple menu, the App Store shows there is one update needing to be done but when I open the App Store, it shows none need updating.
This is a week-old MacBook Pro with 2.8Ghz i5, 8GB, and 512 SSD.

Next time that happens while on WiFi, turn WiFi off in settings, wait about 30 seconds or so, then turn WiFi back on. Sometimes you have to do this two or three times, but this fixes that issue as well.

My laptop that i loaded my ipod onto when i bought it is not working, and i now have a mac, and recently purchased an album from itunes, but it won't load/ sync to my ipod. how do i fix this?

just bought an album from itunes but it won't sync to my ipod. i was using a PC but am now using a mac. Is there anything i can do?

iTunes & iPod Hints & Tips
iPod: Frequently Asked Questions

Firefox says I need to update, but it won't download adn install?

Trying to update software for Firefox. Window says it is downloading but it won't connect to the update server.

Do you get an error message?

HT4623 it says there is not update but it will not let me download and apps because it needs a new version of ios

it will not let me download any apps it says that the apps are not compatiable with ios 4.2.1

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

I have installed itunes and it says it has been installed but doesnt appear anywhere

I have removed iTunes as I had previously unintentionally removed a part of the program that gave my laptop sound! I am now trying to reinstall, I downloaded and ran the program twice now and each time it says that iTunes has been installed but I can not find it anywhere, no desktop icon and not listed on the program list in the start menu or in control panel> add or remove programs. please help!

See the further information section of Troubleshooting issues with iTunes for Windows updates for download advice.
tt2

HT201441 i have an iPhone and it says to connect to iTunes but when i go to iTunes it needs a apple id of the previous owner but i bought it off of him and i don't know how to contact him so I'm stuck at the activation screen and it won't let me use the p

I really need help.

You can not go any further without intervention from the previous owner.
Find My iPhone Activation Lock: Removing a device from a previous owner
iCloud: Activation Lock

The osx app store says there's an update but there's not?

how can i;
a) find the update, or,
b) remove the notification?
it's on the icon also..

Your screenshot isn't showing for me.
But here's something you can try...
Quit the app store. Open finder. Click "Go" at the top of your screen (same bar as the apple), then click "go to folder" on that menu. Type in "/var/folders" without the quotes and click Go. Back in the finder window, you'll see folders in there with 2 characters (like dq, zz, etc). Drag those to your trash. You can also clear /Library/Updates. Reboot for good measure, then check for software updates under the Apple menu.

I have premiere elements 9 and it says there is an update but it won't

Similar Messages

Maybe you are looking for