I have problem after cleaning LCD on my SP U200

Hi,
I have the following problem with my U200. I routinely clean my monitor using foam LCD cleaner. But because of some reason the foam got inside the monitor, seems that it is between the trubrit and the LCD. Because of experience I believe that it was not my fault.
For me is the sealing between the trubright and the LCD that have the problem. Now the monitor has some dirts that is mean that the foam evaporated.
The guys at Toshiba insist that is my fault.
Anyone faced such issue with their monitor? What was your Toshiba service centre approach?
Best Regards,
Pantelis

Hello Pantelis
Please do not be mad on me but I also believe it is your fault and you can not call for display replacement covered by warranty. I have cleaned so many LCDs in last 7 years and I have never noticed something like this. I really can not imagine how much liquid you have used to clean the LCD.
It must be done very carefully and the liquid must be dosed as the need arises. Sorry but I do not see solution there. Maybe LCD disassembling and cleaning can help. Try to talk with technicians.

Similar Messages

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

I have problem, after upagrading my ipad to ios5 i cannot sync my music library correctly it is diiffrence between song in itune and in music i ipad after sync. I chose the option to sync entire librery but few albums did not sync. I got error about sync

I have problem, after upagrading my ipad to ios5 i cannot sync my music library correctly it is diiffrence between song in itune and in music i ipad after sync. I chose the option to sync entire library but few albums did not sync. I got error about sync problem but dont remmember number. I tried sync and unsync nothing my itunes library has 3367 songs and when i connect ipad it shows after selecting entire music only 3342 songs. Pleaese help. Thank you.

You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

Hi i have problem after plug-in to itunes my tough screen is stucke whot shuld i do?

Hi
I have problem after plug-in itune my iphone is stuck the screen is only showing itune and cable. I can't turn off, whot should I do?

My iphone is showing the same thing (i think) on the screen that I plug into itunes. Itunes is saying that I need to restore my iphone. Can I avoid restoring the iphone?

I have problems after upgrade my firefox

I have problems after upgrade my firefox
<i>(Suspected spam link removed by Moderator. Please read the [[Forum rules and guidelines]] -m)</i>

Hey there Noel,
It sounds like you are unable to activate your iPhone after you reset it. I recommend the steps from the following article to help you get that resolved:
Get help activating your iPhone
If your carrier provided a SIM card, make sure it's in your iPhone.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
Thank you for using Apple Support Communities.
All the best,
Sterling

Problems after cleaning my notebook

I cleaned my cpt with wet piece of cloth! Started my nightmare, cpt was not able to boot keep getting USB drive errors mouse errors or keyboard errors on BIOS.
After finally boot but keep turning off itself. Dont know what to do!

Computer or notebook cannot be cleaned with wet piece of cloth. Wetness is very dangerous for electric components. I am afraid some electronic parts are wet now and this is the problem.
Who knows how you done this?
Anyway leave it for a while or try to have it dry again and check if you can use it again in hope it will work properly. Hopefully you have not damaged board electronic.

Permission Problems After Clean Intall Accessing External Drives

Okay, the ubiquitous permissions problem. Perhaps apple should release a system update that strips this BS out, as single users and home users, do we really need this? I'm just driving my Ferrari to the grocery store! It is just complications that nobody needs.
So, with a fat chance of that happening, is there a DEFINITIVE paper/instruction on permissions? Please point me to it. I've tried here and there is nothing that seems to work for me. I'd like to NOT have to learn anything and continue without messing around with this crap, but it did it to me, so now I'm forced to screw around to fix it.
(I used to be a system admin years ago so I can take a fairly technical approach, but I'd rather not. (Puh-leeze! No terminal instructions.)
Here's my problem:
Having had a problem with corrupt login items and being unable to uninstall them, (the machine crashed and rebooted) I was left to perform a clean install of my system.
I have numerous hard drives attached.
Well, upon a successful install and migration of settings from Safari and Firefox and such, I was gently told that a couple of my drives are not accessible by me, the user. (I can see'em, but some apps like transmission won't write to them. Or backup software cannot backup to them.) I'm currently setup up with my daily account/user as the admin, with the super-admin account dormant and not used, as I've been instructed. (My previous system had me using my super-admin account all the time.)
How do I go about setting permissions to reaccess these drives without checking the "ignore permissions" box?
Is the simplist thing to do, to just copy/backup the drives, erase them under my present account, and re-install the data to fix this permission BS?
I've done the "fix permissions" thing and it does not help.
Do drives that you create with a former system user, retain the user profile that created them even after you install a new system, thus causing this problem?
Thanks
Herkimer

What users do you have defined on your system?
Herkime wrote:
Thanks for the help, guys. I downloaded the app and will take a look at that to fix my problems.
What user do you want to use to look at the data?
Decide what user you are going to logon as.
Use BatChmod to make this the owner of the data. The group should be whatever is the group assigned to your logon user.
Do drives that you create with a former system user, retain the user profile that created them even after you install a new system, thus causing this problem?
Files you created with root still have root permissions.
The other 5 diskes, internal, externals FW, and removeables FW toasters, were all created under the old system, using the super-admin user. That designation is gone. (Actually, I recreated the same name/login on the newly installed system, along with my everyday admin user log in.
I get the feeling I'm stuck in a little permission limbo, as the disks are looking for the old super-user and that's gone. Correct?
I assume by super-user you mean root. You can enable the root account again if you wish. There is not need.
I'm not sure what user, or group I should be setting everything too, now. Me, as the admin/user or
Who is Herk the super-admin? How did you define Herk.
By definition super-user is root. You are not allowed to rename root. So the super user isn't Herk.
A user can be given admin rights. This doesn't give the user super user/root rights. Root can read & write any file on the system. This root is the super user.
By Herk do you mine you gave Herk admin rights?
Bottom line:
[] Decide what user you will be using on your system.
[] Change all permission you your external drives to match user & group of that id.
Some people define two user on their system. This way maybe more secure, but with more hassles.
standard user
admin user
I run with one user:
admin user. This lets me install programs without have to change to another user. It doesn't let me look at system data. I cannot look at other userids data. ( I want to look at data I do not have permissions to, I can use the terminal to gain access. )
Robert
Message was edited by: rccharles

Problem after cleaning keyboard on a T410

Hi, I just cleaned a T410 with a spray foam, as I always have done with the fluid proof thinkpad keyboard. But this the left button of the trackpoint mouse does not work anymore. Y removed the button and can see there is dust or dirty there. Also, when I apply compressed air I can see both transparent film separating from each other. There is nothing different from the right button that works fine. Does anyone what else can I try in order to fix this problem? Also, I would to understand why this had happened. Thanks Oliver

Hello everyone,
One thing to remember is that the keyboard is not "fluid proof" it is "spill resistant" these are two very different distinctions and I would not use a foam cleaner to clean a Thinkpad unless its specifically recommended. Drying it out is the best option, I would prefer using a hairdryer on a low setting rather than making a thinkpad cake in the oven. That's just my personal opinion though.
Cheers,
Ed.
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

Problems after replacing LCD screen

I fell over and cracked the screen to my ipod nano 3rd gen. (also broke my arm but that was easier to fix!). Ive just bought a new lcd screen for it and followed all the directions on how to install it. The problem im having now is it all appears to be connected right but the screen just flashes white to black and beeps. It was only recognised on my laptop as "no name" not as an ipod. Could someone please help and let me know what i have done wrong? Before replacing the screen my ipod still worked perfectly. Thanks in advance!

Thanks man. I will take a look at it later on tonight and see what happens. From my understanding some of these LCD's have the airport built-in or is it the antenna? I think mine is one of those, But it looked like the antenna just runs on the side of the casing for the LCD display which is still intact as I only removed the actual LCD screen. I'm gonna see if the connector is in fact not pushed in all the way although I never touched it.

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Anyone else have problems after QT 7.3 update? My FCE is dead in the water

Since updating my QT to 7.3 my FCE will no longer export using QT conversion, nor will it allow clips to be installed into the time line. An "insufficient content for edit" comes up whether I try to install between other clips already in place or when I try to install a clip at the end. My FCE is, once again, dead in the water after a QT update.
I've looked for a QT 7.3 uninstaller but to no avail.

Here's what happened.
After doing everything by the book, nothing worked-except that unsufficient edit warning-so I shut down for a few minutes and figured I'd try a few things.
After doing a cold reboot I opened the existing file with 7 hours of clips. It had an opening to it which had been shortened. I tried to insert a clip, and insufficient edit popped up again. I took the clip and tried to drag it to the timeline, nothing. I went to the absolute end of the timeline, tried dropping the clip onto a clean video/audio track and it appeared. That was a start. I took the clip and moved it to the tracks with existing video and audio (V1, A1,2) and it moved toward the existing clips with no problem.
I deleted the clip from the timeline and tried to install the clip through the canvas and it took. Don't ask me how or why, but for some reason it would not allow clips onto the timeline until it was 'retrained' for lack of a better term. It is now taking clips as it did before the troubles.
I'm wondering if there was some type of 'ghost' clip which just wouldn't go away until it was overwritten manually-although overwrite through the canvas wouldn't work before. Perhaps the problem and the updates were coincidental but experience would say no. I would guess I tripped something which may be difficult to reproduce, but it's returned as it was. Thanks for reminding me to do the maintenance, it had to help in the overall. But I'll remained thrilled that it works but baffled why it didn't.

Keyboard problem after cleaning

I decided to clean my aluminium keyboard yesterday, and some of the keys have since stopped working. Several keys are also typing by themselves (if that makes sense).
Can anything be done, or do I have to fork out for a new keyboard?

How did you clean it, using fluids? If you did it's probably best to let it dry naturally rather than applying a hairdryer. If the weather's good (36 degrees here ) let it air outside. If that doesn't fix it sounds like it's time for a replacement .

Weird problems after clean install on Win 7 64 bit

So I just built out a brand new machine with Win 7 64 bit and installed CS4 on it. PS works great, super quick! As I went through and tried to work on some websites last night, I found that the File/Open, File/Save and File/SaveAs options don't work? When you first open Dreamweaver (or Flash - haven't tested anything other than PS/DW/FL) the initial opening screen you can click on new HTML doc for example but clicking Open... doesn't bring up the windows open/browse dialog box. My DW install is all up to date and I tried to install over the top of it but that didn't help. Does anyone have any idea what is going on? Thanks in advance for any insight or help you can offer!
--J

I have been running Dreamweaver CS4 on Windows 7 64-bit without problems for over a month (new machine, not upgraded from a previous version of Windows). The only part that fails is the documented problem with selecting the site root in a new site definition (see http://forums.adobe.com/thread/478327).

Is anybody have problem after upgrading mountain lion to 10.8.2?

I have a macbook pro with 16 meg ram
I have a new problem since I upgrade to mountain lion 10.8.2 : My computer freeze and the only way to make it works is to reboot.
Is someone have this same problem?
Any information about that?
Thanks
Pierre

I'm a similar issue, but mine freezes up on almost any program and can't really see a constant reason why. I'm going to try the combo updates as sig suggested to see if that helps.

Time Machine problem after clean install

I installed an SSD drive on my mac and did a clean install of OS X Lion.
Now, when I access my time machine backup disk I can only restore applications and not any files.
Is there anything I should do to be able to restore files etc.?

Erase Lion from the hold commnad r boot into Recovery, then reinstall it again.
Next when you setup Lion, have teh TM drive connected and use Setup Assistant to transfer from TM drive.
What I suspect happened is you have the same named account and it's conflicting.
Most commonly used backup methods explained

I have problem after cleaning LCD on my SP U200

Similar Messages

Maybe you are looking for