I have problem downloading the itunes for mac and safari says it needs to send the form again.

Hello There,
I have been facing this problem for a while. Once I download the ITunes for my Mac the safari says the following:
Are you sure you want to send a form again?
To reopen this page Safari must resend a form. This might result in duplicate purchases, comments, or other actions.
I need help ASAP.
Thanks,

iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

Similar Messages

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
heading
bash-80X24 and
in the box reads Joel$-office installer.mpkg joel$ .
nothing further happens

This is thread from Apple discussions.
Look for the suggestion from Shootist007 towards the end of the 2nd page.
It is just may be useful.
https://discussions.apple.com/thread/3709115?start=15&tstart=0

I downloaded AutoCAD 2013 for mac and then the macbook started to glitch! WHY????

Hello,
I downloaded AutoCAD 2013 for mac and after 20 minutes work in the Autocad my macbook pro with Retina display 13 inch (OSX 10.9.1) started to glitch.
Then I deleted this program from mac, but it is still glitching. When I am moving windows, the picture on display is just breaking and after few seconds it is ok. Moreover, the Multi-Touch Trackpad's three, four finger function is also glitching.
Did it happen because something wrong with my graphic drivers which could be replaced by the AutoCAD
Please help me with this!!!

Reinstall AutoCAD and relaunch teh program. AutoCAD leaves the GPU in a bad power state in Mavericks, which causes problems.

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Done everything C&W suggest

I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Don everything C&W suggest

OK I just transitioned to MacMail, iCal, and Mac address book. Goodbye Outlook, It was great for 18 years and painful for the last year. Microsoft is losing share with subpar software development.

Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number. Also is the serial number the same for Mac and Win versions? Many thanks.

Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number. Also is the serial number the same for Mac and Win versions? Many thanks.

Yes it should work transferring PSE10 from Mac to Mac. There is a download link below for PSE10, which your friend could use. There is a formal licence transfer process but it’s not necessary for your friend to register the product (activation is sufficient) although he couldn’t benefit from future upgrade pricing without registration. Serial numbers typically can only be registered one time.
Boxed versions of PSE are normally multi-platform with disks for both Windows and Mac; so the serial number is the same. Downloads have tended to be single platform only although I believe the current version PSE12 will work on both Windows and Mac with the same serial number – boxed or download.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

I have just downloaded pixel bender for CS5 and

I have just downloaded pixel bender for CS5 and know I get this message The image dimensions exceed the hardware capabilities of your GPU. What do I need to do to make it work

What are the pixel dimensions of the image?
You might try reducing the pixel dimensions of the image and see if that makes a difference.
Image>Image Size

With the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

I have a creative cloud subscription for myself and 2 other colleagues but cannot add the other 2 colleagues as users. How do I do this?

I have a creative cloud subscription for myself and 2 other colleagues but cannot add the other 2 colleagues as users. How do I do this?

Hi American,
I checked you account and I found that you just have 1 seat in your Creative Cloud account. You need to add a license from the top right corner on your Team admin page.
You can follow the article: Creative Cloud Help | Manage your Creative Cloud for teams membership which will help you to add a license in your Team account.
Let us know if you face any troubles while doing that.
Thanks,
Ratandeep Arora

HT1338 I'm trying to upgrade to the OS X lion, and it says I need to have a Intel Core 2 duo. I currently have a 2 GHz Intel Core Duo. How do I go about making the change? Any help would be appreciated, Thanks Kevin

I'm trying to upgrade to the OS X lion, and it says I need to have a Intel Core 2 duo. I currently have a 2 GHz Intel Core duo. How do I go about making the change? Any help would be appreciated. Thanks, Kevin

I was afraid of that.... Thanks for helping!

I left my I phone connect to the ITune few hours and it looks like I lost all the info and now I can't activate it..Any suggestion?

I left my I phone connect to the ITune few hours and it looks like I lost all the info and now I can't activate it..Any suggestion?

Is it still charging if you connect it to the adapter? If yes, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
iOS: Recovery mode

HT1529 I turned on my macbook and it says it needs to recover the disk

I turned on the macbookpro and it says it needs to recover the disk but there is no disk to recover from. How do I repair the disk?

Restart while holding both the Command and R keys, that will start from the recovery hard drive...then go to Utilities and Disk Utility and Repair hard drive. See if that is what it wants you to do.

I have Photoshop Elements 6.0 for mac. What do I need to do to get the latest version?

I havePhotoshop Elements 6.0 for mac. What do I need to do to get the latest version?

See http://www.adobe.com/products/photoshop-elements/buying-guide.displayTab3.html

Seamlessly switching between iTunes for Mac and Windows

The path on a Windows machine to my iTunes is something like N:\My Music, where N is mapped as a network drive. On a Mac, that same Drive N is mapped as “fireserver” on the server machine. So on iTunes for the Mac, it would have to be //servername/fireserver/My Music or something along those lines.
Here’s the problem. The iTunes Library.itl and iTunes Music Library.xml are the files in Windows that store the information regarding which iTunes music is there, as well as the playlists and their contents. Therefore, if I move from one machine to another, as long as each has the server’s drive mapped as N, I can copy those two files from one machine to the other and it serves two purposes. First, it is a backup of sorts of my iTunes library. Second, I don’t have to update the information on two computers but rather one, and then copy the files to have an identical library, including playlists.
I would like to sync my iPhone and iPod(s) with my Mac, but I have a Windows machine, and need to continue to use that Windows machine to do other things with iTunes, such as port music to the backyard of my house. I don’t know how to keep the two iTunes libraries in sync since the xml and itl files refer to files and folders within N:\My Music. Even if I laboriously edited those files and did a global replace, that would be a one shot deal, and thereafter, I would have to update on the Windows side and on the Mac side.
So here is the question. Is there a way that I can set up my Mac so that when I refer to N: it knows that I mean //servername/fireserver (I’m not sure if I have the syntax right, but I think I’m getting my point across)? In this way, the files would point to N:\whatever and the computer would know that I mean //servername/fireserver/whatever.
This would solve a major problem for me.
Thanks in advance!

I have been really surprised by the lack of responses to this post. I'm thinking, this is such a typical thing that people would want to do - sharing their music with friends and family - I can't be the first to have the problem. Plus, I've always received such quick, expert advice on this forum to other questions since buying my Mac a couple of months ago.
But now I'm wondering whether there is something else going on that precludes the resident experts from answering. Is sharing music as I've described illegal? Maybe that's why everybody's keeping quiet, i.e., if you tell me how to share my songs with a friend then you're assisting in copyright infringement.
I didn't think it was illegal to share music with a friend in this way, as long as the songs you've downloaded from iTunes aren't shared on more than four devices or whatever. If it is illegal I'd sure like to know. That would also explain the radio silence.
Thanks.

I have problem downloading the itunes for mac and safari says it needs to send the form again.

Similar Messages

Maybe you are looking for