I HAVE PROBLEM FOR SENDING MESSAGE FROM PC WITH MY...

HI
PC Suite says "Unable to send Text Message"
i have connect my mobile to my PC via USB Cable.
I've been using PC Suite to send txt for months no problems.
I format my mobile some days ago and reinstal PC Suite
but it cant do it anymore.
when i try to open my inbox or send a messege from PC
PC Suite try to install smsSync( text message support for PC Suite) to my mobile but it can`t and i recive a error message .
it messag prompted that instaliton to mobile wase failed and ask me try again ...
I can still browse the phone, sync with outlook... everything except send a txt.
Please Help me

What is the error message you get when PC Suite asks to install SMSSync onto the phone?
Just to pre-empt you, if it says installation failed for security reasons (or something like that), check the application settings - go to Menu, Tools, Manager, Options, Settings... here you should have software installation set to ON and Online certif check set to off.

Similar Messages

Error: You don't have permission to send messages from this mailbox.

When I try to email from an email Mailbox in SharePoint I'm getting this error message.
Error: You don't have permission to send messages from this mailbox.
This error only occurs if I try to send from the Project email i.e.
[email protected]
I've never seen this error message before and previously never had this problem so I'm wondering if this is caused by a recent change.
Cheers,
Mark
Learning SharePoint

Hi Mark,
According to your description, my understanding is that you got a permission issue when you emailed
from a site mailbox.
From the From address
[email protected], whether you are using Office 365.
By default, email sent from the site mailbox has a From address of the individual who sends the email. To allow a user to use the site mailbox email address as the
From address, you can give the user Send As permission for the site mailbox email address.
The permission seems to be for Exchange level, not SharePoint. So, please grant Send As permission to the user.
More information, please refer to the links:
https://support.office.com/en-us/article/Prepare-for-using-site-mailboxes-in-Office-365-6381daa5-3d98-4629-972d-d19e1dc48c1b?ui=en-US&rs=en-US&ad=US#__toc346536395
http://www.lynced.com.au/2014/03/sharepoint-online-site-mailbox-send-as.html
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Problem in sending mail from database with attachment

Hi All,
I amd using forms10g,oracle10g
I am facing a error while running a procedure to send mail from db
procedure is:
declare
ErrorMessage VARCHAR2(4000);
ErrorStatus NUMBER;
-- enable SQL*PLUS output;
--SET SERVEROUTPUT ON
-- redirect java output into SQL*PLUS buffer;
--exec dbms_java.set_output(5000);
BEGIN
ErrorStatus := SendMailJPkg.SendMail(
SMTPServerName => '192.168.4.2',
Sender => '[email protected]',
Recipient => '[email protected]',
CcRecipient => '',
BccRecipient => '',
Subject => 'hth106: Test JavaMail',
Body => 'This is the body: Hello, this is a test that spans 2 lines',
AuthReqdYNNum => 1,
UserID => 'jagan',
Password => 'songbirds',
ErrorMessage => ErrorMessage,
Attachments => SendMailJPkg.ATTACHMENTS_LIST('C:\oramail\MHTHSO_GEN45.html')
END;
while running this procedure i am receiving following error
"ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IncompatibleClassChangeError"
but the same procedure sending mail from all other user in the same database
I am very myuch confused.i have given the all rights
below mentioned rights are given .it is working in all other user on the same db except this user "hth106". And all the othere things are compared between working user and this hth106 user every things are same.But i am receiving error when i sending mail with attachment if the mail is sending without attachement it is working fine
below rights are given to this user
1.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read');
2.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','write');
3.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','connect');
4.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','resolve');
5.exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','read');
exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','write');
6.call dbms_java.grant_permission('HTH106','java.net.SocketPermission','HTHDS01','resolve');
7.call dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read,write');
7.call dbms_java.grant_permission('HTH106', 'java.io.FilePermission','C:\oramail\*','read');
please advise me to proceed further
Thanks in advance
Thanks ,
Antony

With respects to the following:
The bit you'll have most diffulty with is the attachment, because you can't be sure that
the directory path specified is one that the database can read from. You can probably
resolve this by using some java to move the file to a directory which utl_file can see.Another alternative is to specify a location on then database server where all file attachments MUST be copied to and the define and Oracle DIRECTORY (CREATE OR REPLACE DIRECTORY [dir_name] AS '/dir/name/on/files/system';) that references this location. When you attach a file to an email, then you only have to refer to the DIRECTORY for the file location.
Just my 2 cents on the topic. :-)
Craig...

I have problem loading all items from XML with for each

Hi all,
I'm low level as3 programmer and I need help whit this code:
I have gallery XML file:
<gallery>
    <item>
        <id>1</id>
        <strana>0</strana>
        <naslov>Lokacije</naslov>
        <aktuelno>1</aktuelno>
        <slika>1.jpg</slika>
    </item>
    <item>
        <id>2</id>
        <strana>2</strana>
        <naslov>Coaching</naslov>
        <aktuelno>1</aktuelno>
        <slika>2.jpg</slika>
    </item>
    <item>
        <id>3</id>
        <strana>0</strana>
        <naslov><![CDATA[O.Å . Bratstvo - panel]]></naslov>
        <aktuelno>0</aktuelno>
        <slika>3.jpg</slika>
    </item>
</gallery>
And:
var loader: URLLoader = new URLLoader();
     loader.load(new URLRequest("gallery.xml");
var xml = new XML(evt.target.data);
    for each(var item in xml..item) {
        centralniText.htmlText = item.slika;
only shows last item from XML file:
3.jpg
I want all. Please help.

can adding count item in XML help somehow?
<gallery>
    <item>
        <id>1</id>
        <strana>0</strana>
        <naslov>Lokacije</naslov>
        <aktuelno>1</aktuelno>
        <slika>1.jpg</slika>
    </item>
    <item>
        <id>2</id>
        <strana>2</strana>
        <naslov>Coaching</naslov>
        <aktuelno>1</aktuelno>
        <slika>2.jpg</slika>
    </item>
    <item>
        <id>3</id>
        <strana>0</strana>
        <naslov><![CDATA[O.Å . Bratstvo - panel]]></naslov>
        <aktuelno>0</aktuelno>
        <slika>3.jpg</slika>
    </item>
    <last>3</last>
</gallery>

Sending email from Lr4 with Thunderbird

Can anyone provide some help for sending email from Lr4 with Thunderbird as the email program. When I select a photo and right-click Email Photo... I get the email photo dialog box with Mozilla Thunderbird in the From drop down. I click Send, and then I get an error message that says "There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
Well, it seems as thigh Lr has Thunderbird in the From drop down, it knows an email program exists. Thunderbird is set as the default. I'm not sure what associations I am supposed to make (.eml and .wdseml are the default extensions, MAILTO is the default protocol, and Send mail is the default MAPI).
Ay clues or hints?

My default mail program is Thunderbird, and it works OK with Lightroom. If you are on a Windows 7 PC, go to Control Panel and check this out.
Hope it helps.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Why when I send messages from my iphone to other iphones, they come up green and not blue? I have all the settings on for I message, but my number comes up grey and not Black? Help someone please!

Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!

Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari

I have a dll file, i want to send messages from this to the device ,how can i do it in labview

Hi,
I am a new user of labview.
I got Vector Card, DUT, DC Power supply and .dll file. Hoe can i connect dll file and hoe to senf the information to the device,
i want to send/receive a message to that device . and measure temperature , humidity of the device. is any one can help?
i have a .dll file, i want to send messages from this file to the testing device ,how can i do it in labview?

Dear Sandy,
How are your DUT, Vector Card and your PC connected?
What vector card is this?
There are a huge amount of Knowledge base articles that you can access from www.ni.com. Simply go to the website and do a search on dll, etc.
There are also a lot of example problems shipped with LabVIEW that will be very helpful for you to learn from and to modify to meet your needs. Go to File»Find Example ....
There are LabVIEW classes taught locally as well that are very helpful. If you're interested I can arrange for you to receive an email with info about it.
Sincerely,
Sammy Z.

Modify Calendar item gives "You don't have the permissions requied to send messages from this mailbox" .

Situation:
-Customer has taken over an existing company.
-New users where created in the domain.
-Mail accounts where created and the .pst's imported.
-Everything fine so far.
Problem:
When a user tries to edit a calendar item created in the past the message "You don't have the permission required to send messages from this mailbox" appears. After that the item is changed in the users calendar who edited the item but not in the
other users calendar who where also invited.
Everything works fine when a new calendar item is generated.
Cannot find anything on this.
Please help!!

Hi,
According to your description, I understand that you create a new mailbox for a user and imported Calendar items to this mailbox by using PST file.
If that is the case, the calendar items which are imported should be created by other user. It is just imported in this mailbox. Please check whether the original mailbox which these calendar items created on is still existed in Exchange server or not. Then
check the calendar items in the original mailbox.
Additionally, if the original user is still existed in your AD or exchange server, please assign Send As permission for the new user to this mailbox to have a try.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Im having trouble sending messages from my iPhone 4..ever since i upgraded to iOS 5, its giving me this problem. It says your SMS mailbox is full. Delete some messages to recieve new messages. I've deleted around 10 huge conversations, rebooted it, resto

Im having trouble sending messages from my iPhone 4..ever since i upgraded to iOS 5, its giving me this problem. It says your SMS mailbox is full. Delete some messages to recieve new messages.
I've deleted around 10 huge conversations, rebooted it, restored it, done a soft and hard reset too. What should i do?

my boyfriend restored his iphone as a brand new phone and still had this problem, he deleted all his text conversations except mine and his best friend's conversations still nothing, i told him to delete OUR conversation since its a 2 year conversation that he has NEVER deleted ..... he said YES!! we tried to delete it and the phone freezes as soon as we click on the CLEAR CONVERSATION button!!!! we tried about 5 times and this happened everytime we tried!!!! ....is like the phone doesnt wanna let go of our conversation!!! every other conversation he deleted the phone was fine except for when we try and delete ours!!
so yesterday he left his phone alone around 4 pm since we have the apple appointment today at 130pm.......around 11 pm last night his phone went NUTS receiving all the text messages i had sent and never received!!!! and now the phone works just fine!!! ...... CONFUSED?????? yeah we are too!!!
but we're still going to the apple store to see what they can tell us!!!

I can not send my Note through email and it used to work. The same problem to send picture from iPhone message

Can't send Notes through email and it used to work. The same problem of sending picture from iPhone message. Did the reset twice but still not working

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

Please Rephrase your query.

Problem in sending messages using java mail api

Hi All,
I have a problem in sending messages via java mail api.
MimeMessage message = new MimeMessage(session);
String bodyContent = "ñSunJava";
message.setText (bodyContent,"utf-8");using the above code its not possible for me to send the attachment. if i am using the below code means special characters like ñ gets removed or changed into some other characters.
MimeBodyPart messagePart = new MimeBodyPart();
            messagePart.setText(bodyText);
            // Set the email attachment file
            MimeBodyPart attachmentPart = new MimeBodyPart();
            FileDataSource fileDataSource = new FileDataSource("C:/sunjava.txt") {
                public String getContentType() {
                    return "application/octet-stream";
            attachmentPart.setDataHandler(new DataHandler(fileDataSource));
            attachmentPart.setFileName(filename);
            Multipart multipart = new MimeMultipart();
            multipart.addBodyPart(messagePart);
            multipart.addBodyPart(attachmentPart);
            message.setContent(multipart);
            Transport.send(message);is there any way to send the file attachment with the body message without using MultiPart java class.

Taken pretty much straight out of the Javamail examples the following works for me (mail read using Thunderbird)        // Define message
        Message message = new MimeMessage(session);
        message.setFrom(new InternetAddress(from));
        // Set the 'to' address
        for (int i = 0; i < to.length; i++)
            message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
// Set the 'cc' address
for (int i = 0; i < cc.length; i++)
message.addRecipient(Message.RecipientType.CC, new InternetAddress(cc[i]));
// Set the 'bcc' address
for (int i = 0; i < bcc.length; i++)
message.addRecipient(Message.RecipientType.BCC, new InternetAddress(bcc[i]));
message.setSubject("JavaMail With Attachment");
// Create the message part
BodyPart messageBodyPart = new MimeBodyPart();
// Fill the message
messageBodyPart.setText("Here's the file ñSunJava");
// Create a Multipart
Multipart multipart = new MimeMultipart();
// Add part one
multipart.addBodyPart(messageBodyPart);
// Part two is attachment
for (int count = 0; count < 5; count++)
String filename = "hello" + count + ".txt";
String fileContent = " ñSunJava - Now is the time for all good men to come to the aid of the party " + count + " \n";
// Create another body part
BodyPart attachementBodyPart = new MimeBodyPart();
// Get the attachment
DataSource source = new StringDataSource(fileContent, filename);
// Set the data handler to this attachment
attachementBodyPart.setDataHandler(new DataHandler(source));
// Set the filename
attachementBodyPart.setFileName(filename);
// Add this part
multipart.addBodyPart(attachementBodyPart);
// Put parts in message
message.setContent(multipart);
// Send the message
Transport.send(message);

I HAVE PROBLEM FOR SENDING MESSAGE FROM PC WITH MY...

Similar Messages

Maybe you are looking for