I have problem in connecting my PC Suite for my No...

Friends,
I have Nokia E63 model and have installed PC suite in my computer.
Whenever I connect to PC suite 1st time, my Phone is getting hanged and getting switched off. And second time it is getting connected without any problem. It is happening every time when I try to connect the Phone to PC suite.
I have uninstalled the PC suite and Reinstalled and checked and getting same problem
My system also formatted and tried fresh and getting same problem.
My computer Os is XP Professional 2002
PC Suite Version: 7.1.40.6
Pls help me with solutions.

Hi,
I am not clear about installed OS in your PC.
Please find following syatem requirement details for Pcsuite
System requirements
Note:
The system requirements listed below are valid at the release date of Nokia PC Suite 7.1. You can check the Nokia PC Suite Web page at www.nokiausa.com/pcsuite for more up-to-date information.
To install and run Nokia PC Suite applications, you need:
    *      At least 300 MB of free disk space
    *      One of the following operating systems:
    *      Windows Vista 32-bit and 64-bit editions
    *      Windows XP Professional x64 edition (Service Pack 2)
    *      Windows XP (Professional or Home Edition) (Service Pack 2 or later)
    *      Administrator rights to the PC to install software on it
To connect your phone to a PC, you need at least one of the following connection sets:
    *      a USB connection cable (DKU-2, DKE-2, CA-53, CA-70, or CA-101) and a compatible port on your PC
    *      a serial connection cable (CA-42) and a compatible port on your PC
    *      an infrared (IrDA) port on your PC
    *      Bluetooth wireless technology equipment and software
If above criteria matches then it should work.
You can try this:
1. Uninstall PC Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Run new PC Suite cleaner.
3. Install latest Pc Suite.
or you can try to install Nokia Ovisuite. You can download from here: http://europe.nokia.com/support/download-software/ nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Similar Messages

I have problem to connect PC-6288

I have problem to connect PC-6288; I use latest version of PC-suite. I installed correctly pc-suite and cable drivers; I unistalled, installed and reebooted pc many times, but the problem remains the same: I cannot connect pc by cable to go to internet. PC-suite says that there is'nt modem, but I saw in START/CONTROL PANEL/MODEM and in START/CONTROL PANEL/SYSTEM/HARDWARE/PERIPHERICAL SETTING and is all ok. Modem is present and all drivers for nokia pc-suite are ok.
Is there someone that can help me?
THANK YOU.

Maybe problem is in PC Suite (I'm not sure). Anyway, maybe Nokia is fixed this in newest PC Suite version (will be come soon), see this:
/discussions/board/message?board.id=pcsuite&message.id=12990

I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help

TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.

Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply!

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

I have problem to connect the I-pad 2 with my computer. I-tunes does not synocronize my IPad

I have problem to connect the I-pad 2 with my computer. I-tunes does not synocronize my IPad

lewis137 wrote:
it dossent matter now ill just reformat my computer
If you like

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

Hi, I have purchased design standard CS6 creative suite for a mac I dont have dvd though and need a link to download this product so i can enter my serial number

Hi, I have purchased design standard CS6 creative suite for a mac I dont have dvd though and need a link to download this product so i can enter my serial number

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Do you have to be connected to the internet for the download to complete?

do you have to be connected to the internet for the download to complete?

Sure. Or where else do you think those files would be coming from?
Mylenium

Problem in Connecting to PC Suite

Phone - Nokia 6275 CDMA
Cable - Nokia CA-53
PC Suite - 6.83
PC OS - Win XP SP2
While trying to connect my phone to PC Suite through data cable, I get a USB device installation error message saying: "Service or service name already exists. USB device could not be installed".
The phone gets detected as the model no. shows in the taskbar. The phone is recognized properly under the "Data Storage" mode.I can even transfer files on to the memory card of the phone. However, the error message pops up every time on trying to connect to PC Suite by selecting the phone's "Nokia Mode". In Connection Manager, the port does not show.
I think it is some kind of a conflict between files or drivers on my PC because everything works just fine on another PC using Win XP SP2, PC Suite - 6.80.22.
Can somebody help?

Bottomline...6.83 has a serious problem when you istall it, and I spoke with a Nokia technical rep 2 days ago and he confirmed it. Unfortunately, Nokia doesn't have a clue to what is the root cause problem. The Nokia rep recommended that I "NOT" use version 6.83. Since they are having so many issues with it, I don't understand why they don't just remove it from their website? No matter what you try you will not get it to work properly!
Now when you try to uninstall 6.83, you also get into trouble. You can unistall the PC Suite 6.83 core application , but the cable driver portion remains. Now when you try to remove the cable driver, under ADD / REMOVE Programs, you get the following error" The feature you are trying to use is on a network resource that is unavailable". Again, the Nokia rep was clueless as to why I was receiving the error message and had no additional help for me in removing the cable driver. It just seemed no matter what I tried I could not remove the cable driver nor could I reinstall PC Suite either version 6.83 or 6.82. Finally, last night I stumbled upon a note from another digruntled nokia 6.83 user that led me to search the following Microsoft info regarding a little program called "Windows Installer Cleanup Utility".
My setup:
Phone - Nokia 9300
Cable - Nokia DKU-2
PC Suite - 6.83
PC OS - Win XP SP2
"THE FIX" for me:
1. Go to (ADD / Remove Programs) and uninstall PC Suite 6.83
2. Now go to the following MS website and download and Run the "Windows Installer Cleanup Utility".
(http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)
Once you download, go down to my item #3 below for further instructions!
Article ID : 290301
Last Review : November 13, 2006
Revision : 5.1
This article was previously published under Q290301
Warning The Windows Installer CleanUp Utility is provided "as is" to help resolve installation problems for programs that use Microsoft Windows Installer. If you use this utility, you may have to reinstall other programs. Caution is advised.
On This Page
SUMMARY
Microsoft has updated the Windows Installer CleanUp Utility. With the Windows Installer CleanUp Utility, you can remove a program's Windows Installer configuration information. You may want to remove the Windows Installer configuration information for your program if you experience installation (Setup) problems. For example, you may have to remove a program's Windows Installer configuration information if you have installation problems when you try to add (or remove) a component of your program that was not included when you first installed your program.
The Windows Installer CleanUp Utility does not perform the following functions: • Remove Windows Installer
• Remove files of any programs that are installed by Windows Installer, such as Microsoft Office 2003
The Windows Installer CleanUp Utility does perform the following functions: • Provides a dialog box in which you can select one or more programs that were installed by Windows Installer
To do this, select the programs that you want in the Installed Products list in the Windows Installer CleanUp dialog box. After you make this selection, the utility removes only the Windows Installer configuration information that is related to those programs.
• Removes the files and registry settings that make up the Windows Installer configuration information for programs that you select
If you use this utility to remove the Windows Installer configuration information for your program and you plan to reinstall the program, you should reinstall the program in the same folder where you originally installed it. This prevents duplication of files on your hard disk or disks.
Back to the top
MORE INFORMATION
This version of the Windows Installer CleanUp Utility works correctly in all 32-bit versions of Microsoft Windows. The 32-bit versions of Microsoft Windows are as follows: • Microsoft Windows Vista
• Microsoft Windows Server 2003
• Microsoft Windows XP
• Microsoft Windows Millennium Edition
• Microsoft Windows 2000
• Microsoft Windows NT 4.0 with Service Pack 3 or later
• Microsoft Windows 98
• Microsoft Windows 95
This version of the Windows Installer CleanUp Utility works correctly in all 64-bit versions of Microsoft Windows. The 64-bit versions of Microsoft Windows are as follows:• Microsoft Windows Server 2003
• Microsoft Windows XP
• Microsoft Windows Vista
The following file is available for download from the Microsoft Download Center:
Download the Windows Installer Cleanup Utility package now. (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)
Back to the top
3. *****Saurabhc, When you run this utility, a window will open up that lists all the of the programs that you have installed. It looks a little bit like the add/remove program window. Select the "Nokia Connectivity Cable Driver" and the "PC Connectivity Solution programs, then run the utility.
4. Now go back to the Add /Remove Programs in Control Panel and try and remove "Nokia Connectivity Cable Driver" and the "PC Connectivity Solution programs now. They should now uninstall!
5. Next I restarted my computer.
6. DO NOT install 6.83!!!!
7. Now go to Nokia website and download PC Suite version 6.82_rel_22:
http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_682_rel_22_0_eng_us_web.ms...
7. You should now be back in business with a working version of PC Suite.
It is obvious that there is a serious issue with the cable driver portion of 6.83 that corrupts MS Windows Installer program during the install process. Even though you initially can install 6.83, the cable driver is messed up. Also, you can't then uninstall the cable driver unless you run the Windows Installer Cleanup Utility.
After a month of fighting this issue, the Windows Installer Cleanup utility was the key to clearing the conflict of the cable driver. Unfortunately, 6.83 has a serious issue with the cable driver.
Good luck...Sorry for being long winded!

I have problems to connect my iphone 6 with IOS 8.0.2 to my citroen c5.

My iphone 6 has problems to connect to my citron c5 via bluetooth. After several attempts I was able to pair the phone to the car but neither are the contacts from the phone accessible by the car nor is can I successfully create calls using the car.

I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

I have problem with connect me to the internet

Hi, I have my apple TV and always I had problem to connect me to the internet I don't know why because I have my Mac, and Iphone that don't have any problem with internet and is the same server.

Ccan you elaborate on the issue?

I have problem to connect iChat. Sometime work and some time not working. When it was not working, there was a message on screen and said the mobile be server was not working. I needed to turn off computer and restarted the computer. Then it might. work

To whom it may help,
I use my iChat to do video chat with my granddaughter. I used to do iChat without any problem to connect with her in New York. However, After Mobil Me account closed, I accounted connection problems frequently. Sometime, I had to turn-off my computer then re-started the computer to make it work again. . When I had this problem to connect on iChat (the Mac did not allow me to choose "available"), the poped out window message said that " the iChat lost the Mobil Me account [email protected]" "The server connection was unexplected disconnect". Do you know what is my problem? My Apple ID for iCloud and previous Mobil Me account should be [email protected] I am no longer using [email protected] for Mobil Me e-mail address. My current iCloud e-mail address is [email protected] is no longer of using [email protected] account for my e-mail. If this is the problem, please let me know how to remove the [email protected] account from your system. Thanks!
David

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

I have problems to connect with Database Server in MDM SP5

Hi,
I am upgrading to SP and get problems to connect to the database server. I am able to start and stop the MDM server, but if I tru to create a new repsoitory or unarchive a repository I get this errormessage. "Unable to connect with Datase Server". In ealier versions og MDM i did not give any username or password whwn I made a new repositirt. Do you need to that no?
I see in the mds.ini file that there is defined a user "Sql Server DBA Username=master ". I sthis the user we shall use or is there another user?
Regars John-Kjell Hoset

Hi John,
I too faced the same problem and get rid of it by installing
SQL Server 2000 Driver for JDBC Service Pack 3
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en
and i installed Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyID=413744D1-A0BC-479F-BAFA-E4B278EB9147&displaylang=en
Install with setup SAPWD="YourPassword"
I connected MDM Console wiht DBMS with Login credentials as
UserName sa
Password YourPassword
Hope this help to solve your problem.
Regards,
Santosh.

Hi all, i have problems to connect my mac (os x 10.8.1) to some projectors. Any idea? And i can not find in system preferences, the option to select the screens. Before my upgrade, the projector was recognized automatically. Any idea? Thank you.

Thank you

These instructions finally worked for me as well, but there are two things that are left off that I had to do in order to make it work. The first is I had to have an ethernet plugged from my wireless router into my mac in order to complete the steps. The second is that after restoring the defaults, I had to then click on "enable wireless" on my desket BEFORE connecting wirelessly to the "HP" network that popped up.
Once you finally get to the web page and click on the networks tab to install the printer on the network, you may lose internet service which will then inhibit you from completing the process (every time I connected to the "hp network" that kicked me off of my own home wifi network, but you have to be connected online in order to complete the process). After trying over and over again, I finally plugged the ethernet in and started all over again with the restoring degaults, then clicking the button the deskjet that says "enable wireless", then followed all of the steps above and I finally received the completed message. Then I unplugged the ethernet cord and all was well (it was a little slow at first like someone mentioned).
So if the steps are not working for you, try plugging the ethernet from the router to your mac first, then follow all of the steps (including the restoring defualts as step one), click on ebable wireless on the printer, then after all of the steps and the complete message, unplug the ethernet.
I also should mention that I have os x 10.9 of which there is no driver on hp's site, so I installed the driver for os x 10.8 first before doing the steps and that is also what helped this to work (I wasn't even able to click on the "webpage" tab on the printers page because it wasn't even finding the printer at first before downloading the 10.8 driver for the deskjet).

I have problem in connecting my PC Suite for my No...

Similar Messages

Maybe you are looking for