I have Problem in Pll Fiel
Hi
All
I have Creating .Pll File , and attach this file in all form
my problem is when i change any funcation in a .pll than i need to recompiling all program which is use any funcation/perco/packge in this .PLL
My Form Which is include in .PLL file are Close , without close .Pll File is Not Complie.
EX.
I HAVE a two funcation in a .PLL
This funcation a is call in a.fmb and funcation b is call in b.fmb , both form are close
now change a Funcation, in .PLL
and Compile and Save
Problem is When i run b.fmb than error is ariving
Similar Messages
-
Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .
Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{ -
I have problem with buy in my visa
hello
i have problem with buy
if i want buy show me this massge
( your purchase could not be completed )
for assistance, contact itunes support at www.apple.comClick here and ask the iTunes Store staff for assistance. There are many reasons that message might appear, and only they can say what the exact one is.
(125655) -
I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again. -
In Safari 8, I have problems moving my bookmark folders without it going into another folder. I cannot organize them in any manner?
Keeping the folder you are moving to the far left will do the trick.
-
HI I HAVE PROBLEM WITH APPSTORE ON MY IPHONE,,,i CANT DOWNLOAD ANYTHINK,,,,BECAUSE MY SESSION HAS TIMED OUT...WHAT I HAVE TO DO NOW?
Hello dear sir alex_h1 i'm still have the same problem my problem is not with imessage or facetime i'm using ipad2 so still cant activate my ipad i hope you help me soon thank you .
-
New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAMNew computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
hi. Could someone help me!!! I have problem with stwich on my ipad. he is only 3 months old. I tried by itunes but still dont help. is the problem number 9.please help me!!!!
My ipad is on DFU mode I conected with itunes. Itunes see my ipad. He restoring the software on ipad and then nothing happed. I see just logo apple. Could you help me what I have to do?
-
I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank youYou need to Contact iTunes Support...
Apple Support iTunes Store Contact Us -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
Hello i have big problem i am seaman and i traveling arround the world i buy apple staff all the time from iphone 3g -3gs - 4- 5 i pad 1-2 macbook pro retina now i planing to buy imac my problem i have before one problem with my laptop and apple direct fix it to me and also buy it from singapore now i have problem with my mobile iphone 5 32gb i buy it also from singapore and i leave in greece i join to arrmy and no posible to use my mobile for 5 days the buttery come down and at last when i take off from army go back see my mobile empty put it on plug try to recharge but nothing fully dead not start no charge what i can do i speak with apple in greece and say me we check the problem but maybe you must send in singapore etc the problem i buy the iphone same price from greece no any change i have worldwide quaranty what i can do so i dont buy apple again only from greece is not possible i buy all my staff like this because i know if i have problem the apple have the best service but after that i very sad relay i dont know what i can do and in 5 months i lost 800 euro ... pls tell me what i can do
thx for your timeThe iPhone warranty has never been International.
Take the iPhone back to the country of origin or mail it to someone you know there and have them take it in for service. -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
I have problem with Bluetooth on my Qosmio G20
Hi
I have problem with Bluetooth.
I cannot use it because it is always off.
(Why Bluetooth Settings reports "Bluetooth is not Ready.")
I gone to Pro.Center in our area and he side (you delete your .. Definition of the Bluetooth!
But how!!!
whatever
How I get a new Definition of the Bluetooth?
Is that possible?
Please help me ... and learn me about all the Bluetooth things...
My pc is (TOSHIBA Qosmio G20)
I am waiting...You should have a look at:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html
Maybe you are looking for
-
What is the difference between wi-fi and wi-fi cellular in purchasing an i-pad?
I am confused about the difference, and want to make a purchase, but don't know if I actually need the cellular or 3G, or what they would be for on an i-pad. Thanks.
-
Hi All, I want to import the Text file which contains the " tab" as Deliminator. I am not able to import this file as I can not put " Tab" in check box provided on Import manager screen while importing the file. Kindly advise on the same. Regards Rah
-
Scan to computer not working after installing wifi booster
working with windows 7 and hp 6515 - just installed a power booster and printer no longer finds computer when try to scan to computer
-
Can't create subversion connection with jdev 11g r1
i am trying to create a subversion connection; but on "Create Subversion Connection" dialog i am entering repository details, "Test Read Access" and "OK" buttons seems disabled, never changing. is anybody tried this? regards, Ayhan Edited by: Ayhan G
-
How can we add extra column beyond 20 in FSG report ?Is it possible through standard functionality ? Regards Jogendra