I have problem running the inverted pendulum trainer using NI ELVIS.

i have a problem running the inverted pendulum trainer using NI ELVIS. While loading the NI ELVIS bypass VI it is unable to find the "enable communications bypass.vi". could anybody please attach the VI.
I am using NI ELVIS 2
Thanks

The Enable Communications Bypass VI sounds like a VI that is only included with Traditional or legacy ELVIS designed to work with the first generation ELVIS unit, not the ELVIS II/II+ or myDAQ. It sounds like the inverted pendulum trainer you have is for use with ELVIS I. In the LabVIEW Loading dialog, do you see the full path for where it's looking for the VI? Can you provide that full path? If the inverted pendulum trainer is designed to work with the older ELVIS unit, there may be a newer version that supports ELVIS II.
Donovan

Similar Messages

  • I have problem with the GPS when i use the apps

    I try to use diffents apps like Runstatic, RunKeepr, Emondo and the record after any running activiti it shorw me a no correct distance and no correct way on the map. Always is more than i did. Is a problem with the GSP of my Iphone ? How I can solvet the problem ? Thanks so much

    Hello eamt,
    Thank you for the details of the issue you are experiencing when you are using apps that use GPS.  It sounds like you are seeing some inaccuracy when using these apps.  I recommend the following steps to improve GPS accuracy:
    Improve GPS accuracy2,4
    GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
    Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
    Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
    Restart your device.
    Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
    Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
    Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
    Find the full article here:
    iOS 7: Understanding Location Services
    http://support.apple.com/kb/HT5594
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Have problem running the reader 11.0.06 on window 8

    keep shutting down the reader...

    Hello chenxia1118
    If it works, by disabling the Proctected Mode then after 2-3 attempts, reenable the Protected Mode settings. Disabling Protected Mode is not recomended.
    ~Deepak

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • How do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS x 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

    how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

    Retail Leopard disc looks like this;
    (The disc itself has the same logo). If the one you've got is grey it simply won't work.
    Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference.

  • Problems running the jsf-compnenets demo on Weblogic 8.1

    Hi,
    I am just starting out with with JSF and I'm having problems running the jsf-components demo. Whenever I try to run any of the JSP's in this demo I get the following error :
    /imagemap.jsp(41): Error in using tag library uri='http://java.sun.com/jsf/demo/components' prefix='d': cannot find tag class: 'components.taglib.AreaSelectedTag'
    probably occurred due to an error in /imagemap.jsp line 41:
    <%@ taglib uri="http://java.sun.com/jsf/demo/components" prefix="d" %>
    I have modified the components.tld file (within jsf-components.war) to remove what appears to be the offending tag but the problem still persists.
    Also, when I try to view the source of the demo, by clicking on any of the links I get the following error :
    <01-Jul-2004 12:00:59 o'clock BST> <Error> <HTTP> <BEA-101020> <[ServletContext(
    id=13712942,name=jsf-components,context-path=/jsf-components)] Servlet failed wi
    th Exception
    java.lang.NoClassDefFoundError: javax/servlet/jsp/el/ELException
    at java.lang.Class.getDeclaredMethods0(Native Method)
    at java.lang.Class.privateGetDeclaredMethods(Class.java:1627)
    at java.lang.Class.getDeclaredMethods(Class.java:1114)
    at java.beans.Introspector$1.run(Introspector.java:1103)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.beans.Introspector.getPublicDeclaredMethods(Introspector.java:11
    01)
    at java.beans.Introspector.getTargetMethodInfo(Introspector.java:966)
    at java.beans.Introspector.getBeanInfo(Introspector.java:370)
    at java.beans.Introspector.getBeanInfo(Introspector.java:207)
    at java.beans.Introspector.<init>(Introspector.java:351)
    at java.beans.Introspector.getBeanInfo(Introspector.java:207)
    at java.beans.Introspector.getBeanInfo(Introspector.java:193)
    at weblogic.servlet.jsp.StandardTagLib.parseTagDD(StandardTagLib.java:13
    33)
    at weblogic.servlet.jsp.StandardTagLib.parseDD(StandardTagLib.java:1271)
    at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:292)
    at weblogic.servlet.jsp.TagLibHelper.loadTagLib(TagLibHelper.java:314)
    at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:145)
    at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:50
    04)
    at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:4842)
    at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:4688)
    at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:2093)
    at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1879)
    at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1752)
    at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:962)
    at weblogic.servlet.jsp.JspParser.doit(JspParser.java:105)
    at weblogic.servlet.jsp.JspParser.parse(JspParser.java:228)
    at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:120)
    at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:258
    at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:364)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:220)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:172)
    at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
    java:504)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:349)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Am I missing something ?
    Any help would be greatly appreciated.
    Thanks in advance,
    Brian.

    Hey,
    You are probably missing jsp-impl.jar in the classpath. Please add it to your class path and try again.
    Senthuran

  • Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Is it possible to set the performance in Camera Raw, like in PS? I have problems with the performance of the adjustment brush. It is a very bad workflow.

    I have problems with the performance of the adjustment brush. It is a very bad workflow.

    Had you specified you're on Windows, I wouldn't even have replied. I don't do windows.
    Yes, it has been a waste of time for both you and me.
    You don't even know how to ask a question properly and you want me to read the FAQs?  Hah! 
    No one will take your word for "ACR latest version", and "PS CC latest VersionVersion [sic]", as many users believe they are fully updated when they are not. Exact version numbers are needed.
    8 GB is considered the realistic minimum to run Photoshop CC, but it's far from optimal—on any platform.  There are other factors that can be at play and which you don't specify, such as the space available on each of your hard drives, whether you have a physically separate, dedicated hard drive for Photoshop's scratch drive, what video card you have and how much VRAM does it have, what your graphics settings are in Photoshop's Preferences > Performance, etc.
    That's why I had indicated a link for you to read:
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    If you read that link in its entirety and provide the pertinent information, maybe some of the Windows experts will be able to help you out.
    Now I'm out of here.

  • HT4664 I have problem running final cut pro X because  NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this ?

    I have problem running final cut pro X because  NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this

    This is the list of Apple approved graphics, except for the cards for laptops. Replace your card with one of these. Get the best you can afford.
    NVIDIA
    GeForce GT 120
    GeForce GT 130
    GeForce GTX 285
    GeForce 8800 GT
    GeForce 8800 GS
    Quadro FX 4800
    Quadro FX5600
    ATI
    Radeon HD 4670
    Radeon HD 4850
    Radeon HD 4870
    Radeon HD 5670
    Radeon HD 5750
    Radeon HD 5770
    Radeon HD 5870

  • I have problem with the n500 with the sound throw the tv with the hdmi connection? any soluation

    hi there i have problem with the n500 when i connect the laptop to the TV throw hdmi cable it is start to make statics noise and it comes from the TV as long as it is connected to the AC POWER and it doesn't make this sound if it is running on battery . any solution please?

    Hi,
    have you tried to kill the session of the DA in the database?

  • I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

    I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
    iPad, iOS 7.0.4

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

  • I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    Hello, Toro Silva. 
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • HT4061 i us iphon in syria and i have problem in the mic how can you help me

    i us iphon in syria and i have problem in the mic how can you help me

    Try to Reset it (hold down the home and sleep buttons, ignore the red off slider, wait for the Apple logo, let go of the buttons).
    If that does not work try Restoring it in iTunes.
    Still no go? You will need to get it serviced.

  • I have problems with the 'installation of creative cloud. Error Code: 205

    I have problems with the 'installation of creative cloud. Error Code: 205 What can I do to fix this?

    Errors 201 & 205 & 206 & 207 or several U43 errors
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Maybe you are looking for