I have problem since I install update this morning. They said to me APPLE MOBILE DEVICE FAILED
This morning I have a demand to accept an update for Itune.
I accept and I receive an error message. Apple mobile Device failed.
Since I dont have access of my itunes
Hello Plume 295101,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I recommend the following article if you continue to receive an error:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services". How do I fix this?
SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!
-
itunes updated today and then ceased to function. I have re-installed twice and am stuck at "starting services" "apple mobile device failed to start"
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
when installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"
Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated. -
I am trying to install itunes. I get a message Service Apple mobile device failed to start
I am trying to install itunes. I get a message Service Apple mobile device failed to start. I am unable to finish the installation.
Hello M Roddy,
The following article provides steps that can help get iTunes updated and working.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
A upgrade to my windows 7 computer failed. they told me to manually install it that failed and unintalled itunes. When i tried to reinstall
it won't and gives me a message that the Apple Mobile Device failed to start- Verify that you have suffiicient priveleges to start system
services. I also have itunes on a laptop, ipod and ipad mini. Please help.Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
When I tried to update my itunes I got a message srvice apple mobile device failed to start and retrying elicits the same message. What do I do?
The most complete resolution is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
Just tried updating itunes and now will not run: apple mobile device failed to start
I was prompted to update iTunes on my Windows 7 PC. Tried to do so but now iTunes refuses to run. An error message continually appears saying that the Apple Mobile Device fialed to startr. I have tried unistalling and reinstalling without success. I would be grateful for advice! I have not had any iTunes issues on my PC before this "upgrade".
Hello, Wessail.
Thank you for visiting Apple Support Communities.
Here are the best steps to help you resolve this issue.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.
Thank you to "turingtest2", solution for someone else worked for me as well!
-
iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?
Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course. -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!
Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.
Maybe you are looking for
-
How to populate values dynamically & allows user to edit some other columns
Hi..I am new to Apex..please help me to sove it out... I have a scenario like editing the some of the Customer details where as one field is dynamically populating from a different table. Columns like Include, Frequency, Communication, Address and Ex
-
Connecting to SQL Server 2000 with MS SQL Server Driver for JDBC
Hi, I am brand new to JDBC . I have installed JDBC driver (for JDBC 2.0) from the Microsoft site and made relevant changes to the class path variable to include the driver paths, as suggested in the driver help documnnts. I have written a simple java
-
Superdrive not reading older DVDs since Lion
Have a 2009 Mac Pro, just updated to Lion. The installed Superdrive spins and nothing gets mounted. In order to eject, I have to shutdown, and catch it when I start again, by hitting the keyboard eject button. The particular DVD is a transfer from
-
Get Attachment Name and from address of mail in bpel process
Hi All, I am using UMS Adapter to poll email server and getting the attachment and saving it to local disk. In Payload from UMS adapter i am getting href of the attachment but I am not able to figure out as to how to get Attachment Name and From A
-
Normal range for the Airport express in iMac
I have a pretty new iMac and since I installed I thought it has a low sensitivity. At the beginning I thought it was because the wireless router was too far, but yesterday I make a test and I put the router in front of the iMac, 3 meters of distance,